Bertazzoni P301CPROGNE Manual de Usario

Bertazzoni horno P301CPROGNE

Lee a continuación 📖 el manual en español para Bertazzoni P301CPROGNE (8 páginas) en la categoría horno. Esta guía fue útil para 9 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios

Descargar PDF
Página 1/8
EN
BERTAZZONI
INSTALLATION AND USER MANUAL
BUILT-IN DOMINO HOBS
P301CPROGNE
P302PROGNE
TAZZONI.COM
2
GENERAL NOTICE
The manufacturer refuses all responsibility for possible damages to things or people, resulting
from a wrong installation or from an improper, incorrect or unreasonable use of this equipment.
We invite you to read this instruction booklet carefully, before installing and using the
equipment. It is very important that you keep this booklet together with the equipment
for any future consultation.
If this equipment should be sold or transferred to another person, make sure that the
new user receives the booklet, so that he can learn how to operate the appliance and
read the corresponding notice. This is a Class 3 appliance
Dear Customer,
We thank you and congratulate you on granting us your preference, by purchasin one of our products.
We are sure that this new appliance, manufactured with quality materials, will meet your requirements in
the best possible way.
The use of this new equipment is easy. However, we invite you to read this booklet carefully, before
installing and using the appliance. This booklet gives the right information on the installation, use and
maintenance, as well asuseful advice.
THE MANUFACTURER
WARNING
- The installation must be carried out by experienced and qualified personnel, in conformity with the
regulations in force.
- This appliance is not intended for use by person (including children) with reduced physical, sensory or
mental capabilities, or lack of experience and knowledge, unless they have been given supervision or
instruction cencerning use of the appliance by a person responsible for their safety.
- Children should be supervised to ensure that they do not play with the appliance.
- While the appliance is running, watch the children and make sure they neither stay near the equipment,
nor touch the surfaces that have not cooled down completely.
- Before powering the equipment, check that it is properly adjusted for the type of gas at disposal (see the
“installation” paragraph).
- Before carrying out the maintenance or cleaning the equipment, cut power supply off and make it cool
down.
- Make sure that air circulates around the gas equipment. Insufficient ventilation produces a lack of
oxygen.
- In case of an intense or prolonged use of the equipment, it may be necessary to improve aeration, for
example by opening a window or increasing the mechanical suction power, if it exists.
- The products of combustion must be discharged outside through a suction hood or an electric fan (see
the “installation” paragraph).
- For any possible operation or modification, apply to an authorized Technical Assistance Centre and
demand original spare parts.
ATTENTION:
The product label, with the serial number, is sticked under the hob.
3
INSTRUCTIONS FOR THE USER
It is necessary that all the operations regarding the installation, adjustment and
adaptation to the type of gas available are carried out by qualified personnel, in
conformity with the regulations in force.
The specific instructions are described in the booklet section intended for the
installer.
USING THE BURNERS
The symbols silk-screen printed on the side of the
knob indicate the correspondence between the
knob and the burner.
Automatic start-up with valves
Turn the corresponding knob anticlockwise up
to the maximum position (large flame, fig.1) and
press the knob.
Once the burner has been started up, keep the
knob pressed for about 6 seconds.
Using the burners
In order to obtain the maximum yield without
waste of gas, it is important that the diameter of
the pot is suitable for the burner potential (see the
following table), so as to avoid that the flame goes
out of the pot bottom (fig. 2).
Use the maximum capacity to quickly make the
liquids reach the boiling temperature, and the
reduced capacity to heat food or maintain boiling.
All of the operating positions must be chosen
between the maximum and the minimum ones,
never between the minimum position and the
closing point.
The gas supply can be interrupted by turning the
knob clockwise up to the closing position.
If there is no power supply, it is possible to light the
burners with matches, setting the knob to the start-
up point (large flame, fig.1/1A).
BURNERS Power W Ø of pots
Semirapid 1750 16 - 18 cm
Rapid 3000 20 - 22 cm
Ultra-rapid 4500 22 - 24 cm
Notice
- When the equipment is not working, always check
that the knobs are in the closing position (see
fig.1).
- If the flame should blow out accidentally, the
safety valve will automatically stop the gas supply,
after a few seconds. To restore operation, set the
knob to the lighting point (large flame, fig.1) and
press.
- While cooking with fat or oil, pay the utmost
attention as these substances can catch fire when
overheated.
- Do not use sprays near the appliance in operation.
- Do not place unstable or deformed pots on the
burner, so as to prevent them from overturning or
overflowing.
- Make sure that pot handles are placed properly.
- When the burner is started up, check that the
flameis regular and, before taking pots away,
always lowerthe flame or put it out.
CLEANING
Before any operation, disconnec t the
appliance from the electric grid. Don’t use a
steam cleaner for the cleaning the hob.
It is advisable to clean the appliance when it is
cold.
Enamelled parts
The enamelled parts must be washed with a
sponge and soapy water or with a light detergent.
Do not use abrasive or corrosive products.
Do not leave substances, such as lemon or tomato
juice, salt water, vinegar, coffee and milk on the
enamelled surfaces for a long time.
Burners and racks
These parts can be removed to make cleaning
easier.
The burners must be washed with a sponge and
soapy water or with a light detergent, wiped well
and placed in their housing perfectly. Make sure
that the ame-dividing ducts are not clogged.
Check that the feeler of the safety valve and the
start-up electrode are always perfectly cleaned, so
as to ensure an optimum operation.
The racks can be washed in the dishwasher.
Gas taps
The possible lubrication of the taps must be
carried out by specialized personnel, exclusively.
In case of hardening or malfunctions in the gas
taps, apply to the Customer Service.

Especificaciones del producto

Marca: Bertazzoni
Categoría: horno
Modelo: P301CPROGNE

¿Necesitas ayuda?

Si necesitas ayuda con Bertazzoni P301CPROGNE haz una pregunta a continuación y otros usuarios te responderán


horno Bertazzoni Manuales

Bertazzoni

Bertazzoni PM36 3 I0 X Manual de Usario

13 Octubre 2024
Bertazzoni

Bertazzoni MAST30FDEXV Manual de Usario

10 Octubre 2024
Bertazzoni

Bertazzoni PRO64I1EXT Manual de Usario

8 Octubre 2024
Bertazzoni

Bertazzoni P905LMODNE Manual de Usario

7 Octubre 2024
Bertazzoni

Bertazzoni CB486G00X Manual de Usario

6 Octubre 2024
Bertazzoni

Bertazzoni P903LPROX Manual de Usario

5 Octubre 2024
Bertazzoni

Bertazzoni PRO30 4 GAS X Manual de Usario

5 Octubre 2024
Bertazzoni

Bertazzoni PM365S0X-B Manual de Usario

4 Octubre 2024
Bertazzoni

Bertazzoni PROF30FSEXV Manual de Usario

4 Octubre 2024
Bertazzoni

Bertazzoni X90 6 DUAL VE Manual de Usario

4 Octubre 2024

horno Manuales

Últimos horno Manuales

Continental Edison

Continental Edison CECM6065W Manual de Usario

27 Octubre 2024
Taurus

Taurus HM778WHD Manual de Usario

27 Octubre 2024
Lacanche

Lacanche CITEAUX Manual de Usario

27 Octubre 2024
JennAir

JennAir JDS1450FS Manual de Usario

27 Octubre 2024
Orima

Orima ORP-76-IN Manual de Usario

27 Octubre 2024
Breville

Breville the Handy Hot Plate BHP150 Manual de Usario

27 Octubre 2024
JennAir

JennAir JGRP436HL Manual de Usario

27 Octubre 2024
Neff

Neff C17MS22G1 Manual de Usario

27 Octubre 2024
Pit Boss

Pit Boss BK24 Manual de Usario

27 Octubre 2024
Guzzanti

Guzzanti GZ-8206 Manual de Usario

27 Octubre 2024