Big Agnes Bitter Springs UL1 Tent Manual de Usario
Lee a continuación 📖 el manual en español para Big Agnes Bitter Springs UL1 Tent (2 páginas) en la categoría Diez. Esta guía fue útil para 13 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios
Página 1/2
Cut here to remove. Do Not Tear!
BITTER SPRINGS UL SET UP INSTRUCTIONS
1. Remove contents from stu sack. Spread tent body out on ground.
2. Stake out the four corners of the tent.
3. Assemble the pole. To ensure each pole section is fully seated insert each pole
section into the next by hand, instead of allowing the shock cord to snap them
together.
4. Insert the pole tips into each Jake’s Foot at the side of the tent.
5. Attach the Twist Clips to the pole and stake out the sides of the body.
6. Go to the back of the tent, locate the black pocket and insert the tip of your trek-
king pole in it. If you will be using the tent without the y then and stake out
the guyline. If you will be using the tent with the y then you can wait to guy out
this point.
7. Drape the rain y over the body aligning the Jake’s feet of body with the cor-
responding hooks on the y.
8. On the underside of the y, there are Velcro straps behind each guy-out loop.
Ax the Velcro straps around the pole.
9. Make sure the webbing at the corners of the rainy is completely slackened. At-
tach each of the hooks at the side of the rainy to the corresponding Jake’s Foot
at the side of the tent body.
10. Stand in front of the y door and locate a webbing loop at the black reinforced
patch on the underside of the y. Insert the tip of your trekking pole in the web-
bing loop, adjust the height and stake out the vestibule at the front.
11. Go to the back of the tent, locate the black pocket on the tent body, and insert
the tip of your trekking pole into that pocket. Locate the webbing loop at the
reinforced black patch on the rainy and insert the black pocket with the pole in
it. Adjust the height and stake out the y at the back.
12. Stake out the rest of the guylines
13. Walk around your tent and make any necessary adjustments.
Separate 6”, large diameter pole segment included for emergency eld repair.
Slide repair pole over the break to act as a splint.
Hardware:
Bitter Springs UL Tent Top View
Twist Clip
Jake’s foot
assembly
Bitter Springs UL Fly Top View
Cut here to remove. Do Not Tear!
Thanks for choosing a Big Agnes tent!
Please feel free to contact us if you have any questions or comments.
tech@bigagnes.com
HELPFUL HINTS FOR TENT SET UP
• Our tents are easy to set up but we suggest you practice once at home before
using them for the rst time to avoid late night bickering with tent mates while
fumbling around in the dark.
• Before pitching tent, clear campsite of debris that may pierce tent oor.
• Big Agnes tents are all freestanding, but we recommend staking them out to
increase space and keep your tent from becoming a tumbleweed.
• Hang onto your stu sacks or they’ll blow away and create backcountry litter.
• Pull on the pole sleeve fabric when inserting poles to avoid any bunching in the
material.
• Push rather than pull poles through pole sleeves.
TENT CARE
Storage
Always make sure your tent is dry and free of debris before storing. Fold and roll
your tent a dierent way each time to avoid permanent creases. Store in a cool, dry
place. Never leave your tent in hot temperatures (such as a car trunk or attic space),
as it will damage the material coatings. Storing your tent damp can result in mildew
growth, which may cause your tent to smell, leak or delaminate. Mildew damage is
not covered under warranty.
Cleaning
For light cleaning, you can sponge the tent with warm water. If it’s necessary to
wash the entire tent, always use cleaners recommended specically for tents. We
recommend McNett Mirazyme cleaner, or Nikwax Tech Wash. Do not dry clean or
machine-wash your tent. Detergents and dry cleaning solvents will damage the
fabric and ruin waterproong. Never use hot water, bleach, liquid detergents or
dishwashing liquids.
Seam Sealing
Seam tape alone is durable enough to prevent water leakage. Any seams that have
been taped do not need to be seam sealed with a liquid sealer unless you want
extra protection. Make sure the seam-sealer is completely dry before re-packing
your tent. Damage caused by misapplication may void warranty.
Zippers
Keeping your zippers clean will help keep the coils and sliders from wearing out. If
lled with dirt, vacuum or brush zippers before storing tent. We recommend McNett
Zip care.
Repairs and Warranty
All Big Agnes tents are guaranteed against manufacturing or material defect. We
do not warranty products damaged from normal wear and tear, alteration made
by owner, misuse, accidents or damages caused by uses other than intended.
Damage due to misuse, normal wear and tear, or improper care may be repaired,
at the discretion of Big Agnes, at a reasonable charge. Tents returned for repair
must be clean and free of debris.
For more information on Tent Care or our Warranty and Return
policy, see www.bigagnes.com
P.O. Box 773072 • Steamboat Springs, Colorado • 80477
Toll Free: 877.554.8975 • www.bigagnes.com
Bitter Springs UL1 Bitter Springs UL2
Especificaciones del producto
| Marca: | Big Agnes |
| Categoría: | Diez |
| Modelo: | Bitter Springs UL1 Tent |
¿Necesitas ayuda?
Si necesitas ayuda con Big Agnes Bitter Springs UL1 Tent haz una pregunta a continuación y otros usuarios te responderán
Diez Big Agnes Manuales
15 Julio 2024
Diez Manuales
Últimos Diez Manuales
19 Octubre 2024
19 Octubre 2024
17 Julio 2024
15 Julio 2024
15 Julio 2024
15 Julio 2024
15 Julio 2024