Black And Decker BDCCF18N Manual de Usario

Black And Decker Flash BDCCF18N

Lee a continuación 📖 el manual en español para Black And Decker BDCCF18N (8 páginas) en la categoría Flash. Esta guía fue útil para 10 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios

Descargar PDF
Página 1/8
www.blackanddecker.co.uk
BDCCF18
1
2
2
ENGLISH (Original instructions)
2
3
A B
C D
3
ENGLISH
(Original instructions)
Intended use
Your BLACK+DECKER BDCCF18 torch has been designed
for providing illumination. This tool is intended for consumer,
use only.
Safety instructions
General power tool safety warnings
@Warning! Read all safety warnings and all
instructions. Failure to follow the warnings and
instructions listed below may result in electric
shock, re and/or serious injury.
Save all warnings and instructions for future reference.
The term "power tool" in all of the warnings listed below refers
to your mains operated (corded) power tool or battery oper-
ated (cordless) power tool.
1. Work area safety
a. Keep work area clean and well lit. Cluttered or dark
areas invite accidents.
b. Do not operate power tools in explosive atmospheres,
such as in the presence of ammable liquids, gases
or dust. Power tools create sparks which may ignite the
dust or fumes.
c. Keep children and bystanders away while operating a
power tool. Distractions can cause you to lose control.
2. Electrical safety
a. Power tool plugs must match the outlet. Never modify
the plug in any way. Do not use any adapter plugs
with earthed (grounded) power tools. Unmodied plugs
and matching outlets will reduce risk of electric shock.
b. Avoid body contact with earthed or grounded
surfaces such as pipes, radiators, ranges and
refrigerators. There is an increased risk of electric shock
if your body is earthed or grounded.
c. Do not expose power tools to rain or wet conditions.
Water entering a power tool will increase the risk of
electric shock.
d. Do not abuse the cord. Never use the cord for
carrying, pulling or unplugging the power tool. Keep
cord away from heat, oil, sharp edges or moving
parts. Damaged or entangled cords increase the risk of
electric shock.
e. When operating a power tool outdoors, use an
extension cord suitable for outdoor use. Use of a cord
suitable for outdoor use reduces the risk of electric shock.
f. If operating a power tool in a damp location is
unavoidable, use a residual current device (RCD)
protected supply. Use of an RCD reduces the risk of
electric shock.
3. Personal safety
a. Stay alert, watch what you are doing and use common
sense when operating a power tool. Do not use a
power tool while you are tired or under the inuence
of drugs, alcohol or medication. A moment of
inattention while operating power tools may result in
serious personal injury.
b. Use personal protective equipment. Always wear eye
protection. Protective equipment such as dust mask,
non-skid safety shoes, hard hat, or hearing protection
used for appropriate conditions will reduce personal
injuries.
c. Prevent unintentional starting. Ensure the switch is in
the off-position before connecting to power source
and/or battery pack, picking up or carrying the tool.
Carrying power tools with your nger on the switch or
energising power tools that have the switch on invites
accidents.
d. Remove any adjusting key or wrench before turning
the power tool on. A wrench or a key left attached to a
rotating part of the power tool may result in personal injury.
e. Do not overreach. Keep proper footing and balance at
all times. This enables better control of the power tool in
unexpected situations.
f. Dress properly. Do not wear loose clothing or
jewellery. Keep your hair, clothing and gloves away
from moving parts. Loose clothes, jewellery or long hair
can be caught in moving parts.
g. If devices are provided for the connection of dust
extraction and collection facilities, ensure these are
connected and properly used. Use of dust collection can
reduce dust-related hazards.
4. Power tool use and care
a. Do not force the power tool. Use the correct power
tool for your application. The correct power tool will do
the job better and safer at the rate for which it was
designed.
b. Do not use the power tool if the switch does not turn it
on and off. Any power tool that cannot be controlled with
the switch is dangerous and must be repaired.
c. Disconnect the plug from the power source and/or the
battery pack from the power tool before making any
adjustments, changing accessories, or storing power
tools. Such preventive safety measures reduce the risk of
starting the power tool accidentally.
d. Store idle power tools out of the reach of children and
do not allow persons unfamiliar with the power tool or
these instructions to operate the power tool. Power
tools are dangerous in the hands of untrained users.

Especificaciones del producto

Marca: Black And Decker
Categoría: Flash
Modelo: BDCCF18N

¿Necesitas ayuda?

Si necesitas ayuda con Black And Decker BDCCF18N haz una pregunta a continuación y otros usuarios te responderán


Flash Black And Decker Manuales

Black And Decker

Black And Decker VP369 Manual de Usario

15 Septiembre 2024
Black And Decker

Black And Decker BDCCF18N Manual de Usario

3 Agosto 2024
Black And Decker

Black And Decker BDLB14 Manual de Usario

20 Julio 2024

Flash Manuales

Últimos Flash Manuales

Stanley

Stanley SL5W09 Manual de Usario

17 Octubre 2024
Ledlenser

Ledlenser P9R Core LEP Manual de Usario

15 Octubre 2024
LED Lenser

LED Lenser P5R Manual de Usario

11 Octubre 2024
Nordride

Nordride 5110 Spor Smart A Manual de Usario

7 Octubre 2024
Varta

Varta 17631 Manual de Usario

7 Octubre 2024
Varta

Varta 18803 Manual de Usario

4 Octubre 2024
LED Lenser

LED Lenser L5 Manual de Usario

2 Octubre 2024
Black Diamond

Black Diamond Ember Manual de Usario

2 Octubre 2024
Brennenstuhl

Brennenstuhl TL 1201 AF Manual de Usario

1 Octubre 2024
Brennenstuhl

Brennenstuhl TL 601 AF Manual de Usario

1 Octubre 2024