Black And Decker BDL400S Manual de Usario
Black And Decker
puntero láser
BDL400S
Lee a continuación 📖 el manual en español para Black And Decker BDL400S (8 páginas) en la categoría puntero láser. Esta guía fue útil para 7 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios
Página 1/8
1
UK
Ireland
Australia
New Zealand
www.blackanddecker.co.uk
5
6
4
1
2
2
3
2
3
D
C
BA
7
8
6
3
Intended use
This Black & Decker tool has been designed to project laser
lines to aid in DIY applications. This tool is intended for
consumer use only.
Safety instructions
◆Warning! When using battery-powered tools,
basic safety precautions, including the following, should
always be followed to reduce the risk of fire, leaking
batteries, personal injury and material damage.
◆Read all of this manual carefully before operating the tool.
◆Retain this manual for future reference.
Keep work area clean
Cluttered areas and benches can cause accidents.
Consider work area environment
Do not expose the tool to rain. Do not use the tool in damp or
wet conditions. Keep the work area well lit. Do not use the
tool where there is a risk of causing fire or explosion, e.g. in
the presence of flammable liquids and gases.
Keep children away
Do not allow children, visitors or animals to come near the
work area or to touch the tool.
Do not overreach
Keep proper footing and balance at all times.
Stay alert
Watch what you are doing. Use common sense. Do not
operate the tool when you are tired.
Use appropriate tool
The intended use is described in this instruction manual.
Warning! The use of any accessory or attachment or
performance of any operation with this tool other than those
recommended in this instruction manual may present a risk of
personal injury.
Check for damaged parts
Before use, carefully check the tool for damage. Ensure that
the tool will operate properly and perform its intended function.
Do not use the tool if any part is damaged or defective.
Store idle tools
When not in use, tools and batteries should be stored in a dry,
locked up or high place, out of reach of children.
Repairs
This tool complies with relevant safety requirements.
Repairs should only be carried out by qualified persons using
original spare parts; otherwise this may result in considerable
danger to the user.
Additional safety instructions for non-rechargeable
batteries
◆Never attempt to open for any reason.
◆Do not store in locations where the temperature may
exceed 40 °C.
◆When disposing of batteries, follow the instructions given
in the section “Protecting the environment”.
Do not incinerate the batteries.
◆Under extreme conditions, battery leakage may occur.
When you notice liquid on the batteries, proceed as follows:
- Carefully wipe the liquid off using a cloth.
Avoid skin contact.
Additional safety instructions for lasers
Warning! Laser radiation.
Do not look into the laser beam.
Do not view the laser beam directly with optical
instruments.
Refer to the laser product characteristics.
◆This laser complies with class 2 according to
EN 60825-1:1 1994+A11. Do not replace a laser diode
with a different type. If damaged, have the laser repaired
by an authorised repair agent.
◆Do not use the laser for any purpose other than projecting
laser lines.
◆An exposure of the eye to the beam of a class 2 laser is
considered safe for a maximum of 0.25 seconds.
Eyelid reflexes will normally provide adequate protection.
At distances over 1 m, the laser complies with class 1 and
thus is considered completely safe.
◆Never look into the laser beam directly and intentionally.
◆Do not use optical tools to view the laser beam.
◆Do not set up the tool at a position where the laser beam
can cross any person at head height.
◆Do not let children come near the laser.
Features
1. On/off switch
2. Laser apertures
3. Battery cover
4. Hanging insert
5. Keyhole insert
6. Marking target
Assembly
Warning! Make sure that the tool is switched off.
Fitting the battery (fig. A)
◆Remove the battery cover (3) from the tool.
◆Connect the battery to the connector.
Especificaciones del producto
| Marca: | Black And Decker |
| Categoría: | puntero láser |
| Modelo: | BDL400S |
¿Necesitas ayuda?
Si necesitas ayuda con Black And Decker BDL400S haz una pregunta a continuación y otros usuarios te responderán
puntero láser Black And Decker Manuales
16 Septiembre 2024
14 Septiembre 2024
16 Agosto 2024
puntero láser Manuales
- puntero láser Bosch
- puntero láser DeWalt
- puntero láser Nikon
- puntero láser Leica
- puntero láser Silvercrest
- puntero láser Makita
- puntero láser Stanley
- puntero láser GPO
- puntero láser Skil
- puntero láser Parkside
- puntero láser Milwaukee
- puntero láser Velleman
- puntero láser Melinera
- puntero láser Kaiser
- puntero láser Speed-Link
- puntero láser Vortex
- puntero láser Stabila
- puntero láser Laserliner
- puntero láser Cocraft
- puntero láser Stairville
- puntero láser Laserworld
- puntero láser Cameo
- puntero láser Uni-T
- puntero láser Prexiso
- puntero láser Picotronic
- puntero láser Meopta
Últimos puntero láser Manuales
3 Octubre 2024
30 Septiembre 2024
24 Septiembre 2024
22 Septiembre 2024
19 Septiembre 2024
17 Septiembre 2024
17 Septiembre 2024
17 Septiembre 2024
17 Septiembre 2024
17 Septiembre 2024