Black And Decker BEH850K Manual de Usario
Black And Decker
Hamer
BEH850K
Lee a continuación 📖 el manual en español para Black And Decker BEH850K (59 páginas) en la categoría Hamer. Esta guía fue útil para 5 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios
Página 1/59

www.blackanddecker.eu
1
2
3
45
67
BEH850

2
7
6
6a
5a
A
58
B
1
2
C
3
D
4
E

3
ENGLISH
(Original instructions)
3
Intended use
Your BLACK+DECKER BEH850 Impact drill has been
designed for drilling in wood, metal, plastics, and masonry
as well as for screwdriving purposes. This tool is intended for
consumer use only.
Safety instructions
General power tool safety warnings
@Warning! Read all safety warnings and all
instructions. Failure to follow the warnings and
instructions listed below may result in electric
shock, re and/or serious injury.
Save all warnings and instructions for future reference.
The term "power tool" in the warnings refers to your mains
operated (corded) power tool or battery operated (cordless)
power tool.
1. Work area safety
a. Keep work area clean and well lit. Cluttered or dark
areas invite accidents.
b. Do not operate power tools in explosive atmospheres,
suchasinthepresenceofammableliquids,gases
or dust. Power tools create sparks which may ignite the
dust or fumes.
c. Keep children and bystanders away while operating a
power tool. Distractions can cause you to lose control.
2. Electrical safety
a. Power tool plugs must match the outlet. Never modify
the plug in any way. Do not use any adapter plugs
with earthed (grounded) power tools. Unmodied plugs
and matching outlets will reduce risk of electric shock.
b. Avoid body contact with earthed or grounded
surfaces such as pipes, radiators, ranges and
refrigerators. There is an increased risk of electric
shock if your body is earthed or grounded.
c. Do not expose power tools to rain or wet conditions.
Water entering a power tool will increase the risk of
electric shock.
d. Do not abuse the cord. Never use the cord for
carrying, pulling or unplugging the power tool. Keep
cord away from heat, oil, sharp edges or moving
parts. Damaged or entangled cords increase the risk
of electric shock.
e. When operating a power tool outdoors, use an
extension cord suitable for outdoor use. Use of a cord
suitable for outdoor use reduces the risk of electric shock.
f. If operating a power tool in a damp location is
unavoidable, use a residual current device (RCD)
protected supply. Use of an RCD reduces the risk of
electric shock.
3. Personal safety
a. Stay alert, watch what you are doing and use common
sense when operating a power tool. Do not use a
powertoolwhileyouaretiredorundertheinuence
of drugs, alcohol or medication. A moment of inatten
tion while operating power tools may result in serious
personal injury.
b. Usepersonalprotectiveequipment.Alwaysweareye
protection. Protective equipment such as dust mask,
non-skid safety shoes, hard hat, or hearing protection
used for appropriate conditions will reduce personal
injuries.
c. Prevent unintentional starting. Ensure the switch is in
the off-position before connecting to power source
and/or battery pack, picking up or carrying the tool.
Carrying power tools with your nger on the switch or
energising power tools that have the switch on invites
accidents.
d. Remove any adjusting key or wrench before turning
the power tool on. A wrench or a key left attached to a
rotating part of the power tool may result in personal injury.
e. Do not overreach. Keep proper footing and balance at
all times. This enables better control of the power tool in
unexpected situations.
f. Dress properly. Do not wear loose clothing or
jewellery. Keep your hair, clothing and gloves away
from moving parts. Loose clothes, jewellery or long hair
can be caught in moving parts.
g. If devices are provided for the connection of dust
extraction and collection facilities, ensure these are
connected and properly used. Use of dust collection can
reduce dust-related hazards.
4. Power tool use and care
a. Do not force the power tool. Use the correct power
tool for your application. The correct power tool will do
the job better and safer at the rate for which it was
designed.
b. Do not use the power tool if the switch does not turn it
on and off. Any power tool that cannot be controlled with
the switch is dangerous and must be repaired.
c. Disconnect the plug from the power source and/or the
battery pack from the power tool before making any
adjustments, changing accessories, or storing power
tools. Such preventive safety measures reduce the
risk of starting the power tool accidentally.
d. Store idle power tools out of the reach of children and
do not allow persons unfamiliar with the power tool or
Especificaciones del producto
Marca: | Black And Decker |
Categoría: | Hamer |
Modelo: | BEH850K |
¿Necesitas ayuda?
Si necesitas ayuda con Black And Decker BEH850K haz una pregunta a continuación y otros usuarios te responderán
Hamer Black And Decker Manuales

4 Octubre 2024

28 Septiembre 2024

9 Septiembre 2024

6 Septiembre 2024

28 Agosto 2024

25 Agosto 2024

24 Agosto 2024

24 Agosto 2024

8 Agosto 2024

6 Agosto 2024
Hamer Manuales
- Hamer Bosch
- Hamer AEG
- Hamer DeWalt
- Hamer Ferm
- Hamer Ozito
- Hamer Gude
- Hamer Makita
- Hamer Hitachi
- Hamer Stanley
- Hamer Hilti
- Hamer Taurus
- Hamer Metabo
- Hamer Milwaukee
- Hamer Hikoki
- Hamer Einhell
- Hamer Power Craft
- Hamer Powerplus
- Hamer Porter-Cable
- Hamer Trotec
- Hamer Topcraft
- Hamer Scheppach
- Hamer Bavaria
- Hamer Fieldmann
- Hamer Cocraft
- Hamer Goon
- Hamer Anova
- Hamer Global
- Hamer King Craft
- Hamer Full Boar
- Hamer Alpha Tools
- Hamer Toolson
- Hamer Robust
- Hamer Einhell Bavaria
- Hamer Ergotools Pattfield
- Hamer MyTool
- Hamer McKenzie
- Hamer Proviel
- Hamer Bavaria By Einhell
- Hamer Prowork
- Hamer XU1
- Hamer Workzone Titanium
- Hamer CMI
Últimos Hamer Manuales

16 Octubre 2024

6 Octubre 2024

4 Octubre 2024

3 Octubre 2024

30 Septiembre 2024

29 Septiembre 2024

19 Septiembre 2024

19 Septiembre 2024

18 Septiembre 2024

17 Septiembre 2024