Black Wolf Tuff 7 Manual de Usario

Black Wolf Carpa Tuff 7

Lee a continuación 📖 el manual en español para Black Wolf Tuff 7 (1 páginas) en la categoría Carpa. Esta guía fue útil para 2 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios

Página 1/1
PITCHING YOUR TENT
1. Choose a flat site, clear away any sharp sticks or stones that may damage your tent
floor.
2. Lay out the inner tent and peg it out at the corners. Note the front of the tent where
the vestibule will be has the door.
3. Assemble the poles ensuring each section locks together, you will have:
2 x Main tent pole top arches (no colour marking)
4 x Main tent pole hockey sticks (no colour marking)
1 x Bedroom pole top arches (yellow marker tape)
2 x Bedroom pole hockey sticks (yellow marker tape)
1 x Vestibule pole top arches (red marker tape)
2 x Vestibule pole hockey sticks (red marker tape)
4. The poles are colour coded to match the coloured tape on the pole sleeves, start with
the yellow bedroom poles, thread the top arch poles through the poles sleeve. With
one person on each side of the tent lift the top arch pole and attach the hockey stick
poles on each side they should angle towards the front insert the pin on the ring into
the pole. Next thread the main tent top arches through the pole sleeves across the top
of the main room in the middle of the tent. Again with one person on each side of the
tent lift one main tent arch pole from both sides and attach the hockey stick poles and
insert the pin on the ring into the pole, repeat for the other main pole. Attach all the
plastic c-clips to the poles. The inner is pitched.
5. Unroll the fly and lay it over the tent. The front of the fly has a pole sleeve for the
vestibule pole. Line up the windows and door. Attach Velcro loops on inside of the fly to
the poles. Thread the red vestibule top arch pole through the poles sleeve then attach
the hockey stick poles on each side and insert the pin on the ring into the pole. Clip
the fly to the tent at the base of the main poles at the front and back. Peg out all the
loops on the fly.
6. Guy Ropes are already attached to your tent. It is important to securely peg out all
guy ropes as the weather can change at any time.
Please Note:
Your tent is not fire-proof, be vigilant around flames and fire. Avoid cooking inside on
open flames.
This tent is not designed or intended to be used as permanent accommodation.
COMPONENT CHECKLIST
INNER TENT AND FLY
12 STEEL POLE ASSEMBLIES AND POLE BAG
2 x Main tent pole top arches (no colour marking)
4 x Main tent pole hockey sticks (no colour marking)
1 x Bedroom pole top arches (yellow marker tape)
2 x Bedroom pole hockey sticks (yellow marker tape)
1 x Vestibule pole top arches (red marker tape)
2 x Vestibule pole hockey sticks (red marker tape)
41 STEEL PEGS AND PEG BAG
GUY ROPES (ALREADY ATTACHED TO THE TENT)
TUFF TENT 7
The gusseted windows on your
tent can be used for ventilation in
almost any weather. Maximising
ventilation will help to minimise
condensation inside your tent.
PEG OUT AND PITCH THE
INNER TENT FIRST
PITCHED TENT WITH FLY
DISASSEMBLY AND TENT CARE
Remove the pegs from the guy ropes, roll up the guy ropes and stow them in
the guy rope fin pockets.
Unclip the fly from the inner and remove, ensure it is completely dry before
folding up. Remove all the poles by pushing them out, rather than pulling.
Clean any dirt from the pole ends. Fold the poles up and return to their bag.
Remove remaining pegs and clean them before they are put away.
Turn the inner over to expose the floor - if this is damp or dirty, clean and
allow to dry. Flip the inner the right way up and lay the fly evenly out on top.
Fold it up, folding into the centre, until the width is the size of the carry bag,
then roll up.
If you must pack your tent up when wet, dry out as soon as possible to
avoid mildew damage. If you have been camping in a coastal environment
everything should be rinsed in fresh water before storing for an extended
period.
The specifications of your tent may vary from what is shown as we are
always working to improve and update our products.
Made in China

Especificaciones del producto

Marca: Black Wolf
Categoría: Carpa
Modelo: Tuff 7
Color del producto: Zwart
Interruptor encendido / apagado: Ja
Diagonal de la pantalla: 32 "
Resolución: 1920 x 1080 Pixels
Relación de aspecto original: 16:9
Estándares wifi: Wi-Fi 4 (802.11n)
red LAN: Ja
Forma de pantalla: Flat
Brillo: - cd/m²
Número de puertos USB 2.0: 1
Número de puertos HDMI: 2
Vídeo de componentes (YPbPr/YCbCr): 1
Número de puertos Ethernet LAN (RJ-45): 1
Televisión inteligente: Ja
Altavoces incorporados: Ja
Energía promedio: 10 W
Consumo de energía (en espera): 0.5 W
Número de hablantes: 2
tipo HD: Full HD
Tecnología de visualización: LED
Tiempo de respuesta: - ms
Montaje VESA: Ja
Interfaz de montaje en panel: 100 x 100 mm
Certificados de sostenibilidad: ENERGY STAR
Profundidad (sin base): 76 mm
Altura (sin base): 430.8 mm
Ancho (sin base): 730.8 mm
Peso (sin base): 4989 g
tipo de sintonizador: Analoog & digitaal
Ancho del dispositivo (con soporte): 730.8 mm
Dispositivo de profundidad (con soporte): 200 mm
Altura del dispositivo (con soporte): 478.3 mm
Peso (con soporte): - g
Wifi.: Ja
Consumo de energía (típico): 26.07 W

¿Necesitas ayuda?

Si necesitas ayuda con Black Wolf Tuff 7 haz una pregunta a continuación y otros usuarios te responderán




Carpa Black Wolf Manuales

Carpa Manuales

Últimos Carpa Manuales