Blebox parkingsensor Manual de Usario

Blebox No categorizado parkingsensor

Lee a continuación 📖 el manual en español para Blebox parkingsensor (2 páginas) en la categoría No categorizado. Esta guía fue útil para 4 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios

Descargar PDF
Página 1/2
SAFETY RULES
Connect only in accordance with the diagram presented in the
manual. Improper connections may be dangerous, it can damage
the controller, and loss of the warranty.
Do not connect the device to loads exceeding the permitted
values.
DANGER! Risk of electric shock! Even with the device turned o,
the outputs may be live. All assembly work should be ALWAYS
performed with the disconnected power circuit.
The installation of the device to a power mains that does not
meet the quality requirements dened by EN 50081-1, EN
50082-1, UL508, EN 60950, will result in the loss of the warranty.
PARKING SENSOR LED / LED RGB LIGHTING CONTROLLER
Before installing the sensor, disconnect the voltage in the supplied circuit.
Remember that all assembly work should be carried out with the power
supply disconnected.
The sensor should be mounted in a place protected from adverse environ-
mental conditions. It is advisable that the device is mounted in a stable and
stationary position.
Connect the LED strips and power supply to the device according to the
diagram.
Optionally, connect the LED lamp indicating the occupancy of the parking
space. When the vehicle is within range of the sensor, the lamp will remain on
continuously.
1INSTALLATION
sensor
bumper/number plate
frame/light
source
Mount the device vertically at the height of the farthest part of the car
(usually a bumper or license plate) as in the drawing below, so that the
connector is at the bottom.
Connect the power supply. Bring your hand or paper closer to the ParkingSen-
sor sensor, the color of the light should change with the detector:
2FIRST START-UP
3MOVEMENT OF THE VIRTUAL WALL
the time of the color illumination (red / blue / green) is 10 seconds, while the
optional LED lighting shines during the entire period of occupancy of the
parking space.
the range of the color changes are established in relation to the virtual wall. By
default, the virtual wall is at a physical distance of 2 cm from the sensor. It can
be adjusted in the physical range 2 cm..250 cm of the sensor by performing
the following steps:
1.
2.
3.
4.
5.
place a at object (for example, a piece of cardboard) in front of the
sensor at the desired distance, such as a virtual wall;
connect the power supply; wait 5 seconds; disconnect the power supply;
connect the power supply; wait 10 seconds; disconnect the power
supply;
connect the power supply; wait 15 seconds; disconnect the power
supply;
connect the power supply; wait until the LED strip turn on white and
then turn o, which means that the conguration has been saved; check
if the virtual wall works as expected.
CONNECTION DIAGRAM
green color
blue color
red colour
pulsing red color
you can move forward safely
you are close to the obstacle
stop the vehicle
stop the vehicle immediately!
option of signaling the occupied
space
LED STRIP
110 / 230V
12 - 24 V
+
power
supply
G
R
B
B R G - 0 +
LED STRIP*
*
-
TECHNICAL SPECIFICATIONS
supply voltage 7 – 24V DC
dimensions 50 x 40 x 25 mm
with connector: 50 x 50 x 25 mm
number of PWM channels 3 (RGB)
sensor ultrasonic, distance sensor
protection level IP20
operating temperature range from -10 to + 40°C
yes
calibration
of notied distance
maximum current
energy consumption
8 A
< 1 W
made of polyurethane composition
not containing halogens, self-extin-
guishing for thermal class B (130 °C)
open collector, 250mA
housing
type of output
MOVEMENT OF THE VIRTUAL WALL
for more information
visit our website
www.blebox.eu
or send us an email to:
info@blebox.eu
support is available at
support@blebox.eu
sensor
2..250 cm
4 cm
virtual wall
17 cm
48 cm
140 cm
2 cm
8 cm 6 cm 4 cm

Especificaciones del producto

Marca: Blebox
Categoría: No categorizado
Modelo: parkingsensor

¿Necesitas ayuda?

Si necesitas ayuda con Blebox parkingsensor haz una pregunta a continuación y otros usuarios te responderán


No categorizado Blebox Manuales

Blebox

Blebox gateBox Manual de Usario

11 Septiembre 2024
Blebox

Blebox shutterBox Manual de Usario

11 Septiembre 2024
Blebox

Blebox parkingsensor Manual de Usario

11 Septiembre 2024

No categorizado Manuales

Últimos No categorizado Manuales

POLARIS

POLARIS RZR S 1000 EPS (2018) Manual de Usario

27 Octubre 2024
Workzone

Workzone 20V Li-Ion Reciprocating Saw PT160501 Manual de Usario

27 Octubre 2024
Philips

Philips 43PUL7672 Manual de Usario

27 Octubre 2024
Manhattan

Manhattan 461504 Manual de Usario

27 Octubre 2024
Sungrow

Sungrow SG125HV Manual de Usario

27 Octubre 2024
Schneider

Schneider CCT724319 Manual de Usario

27 Octubre 2024
Technoline

Technoline WS 250 Manual de Usario

27 Octubre 2024
Livarno

Livarno IAN 354423 Manual de Usario

27 Octubre 2024
Kupper

Kupper 12152 Manual de Usario

27 Octubre 2024
JennAir

JennAir CARBON24L Manual de Usario

27 Octubre 2024