Bliss Outdoors BSL-320 Manual de Usario

Lee a continuación 📖 el manual en español para Bliss Outdoors BSL-320 (1 páginas) en la categoría No categorizado. Esta guía fue útil para 9 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios

Página 1/1
Form No. SJ-BSL-320– BSL-321-880E-M
If you have any questions or comments,
please call the Bliss Outdoors™ customer service department at:
1-800-695-2626
© 2022 Snow Joe, LLC. All rights reserved. Bliss Outdoors™ is a trademark of Snow Joe, LLC. | Made in China
Please read instructions carefully and keep for future reference.
m WARNING: Keep away from ames
m WARNING: Do not shake it violently
m WARNING: Do not disassemble the lights without professional help
PRODUCT INFORMATION :
LED Color White, Multicolor .............................................................
Sensor Type Optical Sensor .............................................................
Charging Ecacy ................................................................... 20%
Charging Time 6-8 Hours .................................................................
Working Time 8-10 Hours ................................................................
Waterproof Rating IP65 .................................................................
INSTALLATION:
1. Install 2 plastic stakes (Fig. 1) and turn on the switch.
Fig. 1
2. Install solar lights on a good place under the high and direct bright
sunlight. Please keep the surface clean, because if the mud, dirt, and
so on are stored in the solar panel, it will have inuence on charging
efciency. NOTE: The stakes can not be forcibly inserted into the hard
ground, otherwise them will be damaged. Before installing the solar
lights into the ground, dig a small hole in the soil with a tool.
3. Solar lights turn off and charge in daytime and bright place, turn on
and light up in the dark or at night automatically.
4. Keep it full charging for 8-10 hours when use the solar lights rst time.
WARM TIPS:
1. Turn on the switch on the back before mounting the solar lights.
NOTE: This is a solar powered light, the working time is affected by
weather. (The working time of our solar lights will change depending
on the weather, sunlight intensity and charging time)
2. Position your solar disk light in a location where disk light can be
exposed to maximum sunlight during the day. Do not position your
solar light outdoor in a place where shade from the sun , e.g. under
trees or shrubs. Our solar disk lights automatically light on at night via
the built-in light sensor. Please don’t place the lights under the light
source at night, e.g. streetlights. Do not use the spikes if you NOTE:
want to put the solar disk lights on the hard ground or steps.
FREQUENTLY ASKED QUESTIONS:
1. Q: Is it always lit at night? Or just when sensing the sensor
A: Because it is a light sensor, it is always on at night.
It turns off automatically when the surroundings become bright.
2. Q: Do I need to turn on the switch when charging?
A:
It is necessary to turn on the switch when charging.
3. Q: Can I use it when it arrives?
A: Yes, you can. Before shipping, the product is fully charged, so
it should be usable as soon as it arrives.
LED SOLAR DISC LIGHTS
BSL-320
BSL-321

Especificaciones del producto

Marca: Bliss Outdoors
Categoría: No categorizado
Modelo: BSL-320

¿Necesitas ayuda?

Si necesitas ayuda con Bliss Outdoors BSL-320 haz una pregunta a continuación y otros usuarios te responderán




No categorizado Bliss Outdoors Manuales

No categorizado Manuales

Últimos No categorizado Manuales