Block & Block SIGMA-50 Manual de Usario

Block & Block No categorizado SIGMA-50

Lee a continuación 📖 el manual en español para Block & Block SIGMA-50 (12 páginas) en la categoría No categorizado. Esta guía fue útil para 3 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios

Descargar PDF

Página 1/12

SIGMA-50

User M -English anual

1. INTRODUCTION

Dear client, Thank you for trust on at the time of purchasing your block&block

new lifting tower. Prior to handling, read fully and carefully this manual SIGMA-50

and follow the safety instructions to obtain the best result using your new tower.

Use only original replacements from block&block. To do so, you should always

buy from authorized distributor. If non-original pieces were used or modications an

to the tower were made the user would lose their guarantee rights. For any other

repair or inquiry you must always indicate the serial number of your lifting tower.

To guarantee maximum security in the usage of lifting tower, you SIGMA-50

should carry out an annual revision in an authorized service centre by block&block,

where they will check the state of the tower in general and the wires, the winch and

the lock-security in particular.

BLOCK&BLOC K reserves the right to modify the specications and the

pieces of this product without previous notice.

2. TECHNICAL INFORMATION

SIGMA-50 telescopic lifting tower has been designed to lift trusses at

dierent heights. On those trusses lighting and sound systems can be hanged.

2.1- SIGMA-50 lifting tower

2.2- Designed to lift vertically lighting and sound systems at dierent heights.

2.3- Maximum load: 120 kg (264 lb).

2.4- Minimum load: 25 Kg (55 lb).

2,5- Maximum height: 5 (16.40 m ft).

2.6- Minimum height: 1,9 m (6.23 ft).

2.7- Base area: 2,06 x 2,06 m (6,75x6,75 ft).

2.8- Tower weight: 35 kg (77.16 lb).

2.9- Insertion diameter: Ø 35 mm

2.10- Construction material: Steel Prole of carbon type S- -J0H manufactured 275

according to EN 10219 and EN10305.5 standards.

2.11- System composed of three telescopic proles powered manually by a winch

with a steel wire of 4mm and guided by steel pulley with ball bearing.

2.12- Winch: 3 kg of maximum load with automatic brake of load holding50 .

Declaration of conformity CE, applied standards harmonized DIN EN 13157, EN

12100 I and II, machine directive 2006/42/CE.

2.13- Galvanized steel wire of 6x19+1 type manufactured according to EN 1 -3414

1:2004 standards, 1770 N/mm2 resistance. Wire diameter : 4 mm.

2.14- Safety mechanical triggers to block the section at different heights.

2.15- Safety triggers in the base to anchor the legs.

2.16- Stabilizer legs adjustable by means of threaded rod and steel plates with base

of anti-slipping rubber.

2.17- Antioxidant protection, primering with paint made of resins of epoxy and stove-

nished .

2.18- Bubble level to adjust the verticality of the tower.

2.19- Directional wheels to transport the lift folded.

2.20- Power supply ground terminal

3. SAFETY INSTRUCTIONS

3.1- The ground of installation for the tower must be solid and at.

3.2- Check the legs are rmly placed on the base by means of automatic triggers.

3.3- Level the machine before lifting. You should level it using the leg stabilizer and

check the levelling with the bubble level included in the tower pack.

3.4- Before loading the lift, check that all the sections are folded and blocked by

means of lock-security.

3.5- Before lifting and to assure the proper function of the winch brakes, check the

tower always holds a minimum load of 25kg.

3.6- Do not exceed the rated load capacity. See load capacity in the Characterics

Sheet.

Especificaciones del producto

Marca:	Block & Block
Categoría:	No categorizado
Modelo:	SIGMA-50
Ancho:	244 mm
Profundidad:	230 mm
red LAN:	Ja
Tipo de fuente de energía:	ATX
Cables suministrados:	SATA
Número de puertos USB 2.0:	2
Puerto(s) VGA (D-Sub):	1
Número de puertos HDMI:	1
Micrófono, entrada de línea:	Ja
Número de puertos Ethernet LAN (RJ-45):	1
Salidas de auriculares:	1
HDCP:	Ja
Puertos DVI-D:	1
Número de puertos USB 3.2 Gen 1 (3.1 Gen 1) Tipo A:	4
Zócalo del procesador:	LGA 1150 (Socket H3)
Sistema de autobús:	6 GT/s
Fabricante del procesador:	Intel
Memoria interna máxima:	32 GB
Canales de salida de audio:	7.1 kanalen
Soporte PCI Express:	4
Guía de Instalación Rápida:	Ja
Tipo de interfaz Ethernet:	Gigabit Ethernet
placa base con chipset:	Intel® H87
Tipo de ranura de memoria:	DIMM
chip de audio:	Realtek ALC892
Controladores suministrados:	Ja
Canal de memoria:	Dubbelkanaals
Ranuras PCI Express x16 (Gen. 3.x):	1
Interfaces de unidad de almacenamiento compatibles:	SATA III
Puerto(s) PS/2:	1
Puertos seriales):	1
Componente para:	PC
Controlador LAN:	Realtek RTL8111F
Tipos de incursión:	0, 1,5, 10
Versión de DirectX:	11.1
Número de conectores SATA III:	6
Ranuras PCI:	1
Procesadores compatibles:	Intel® Pentium®
Número de procesadores admitidos:	1
Número de ranuras DIMM:	4
Tipos de memoria soportados:	DDR3-SDRAM
Ranuras PCI Express x1 (Gen 2.x):	2
Familia de chipsets de placa base:	Intel
Factor de forma de la placa base:	micro ATX
Número de ranuras de memoria:	4
Velocidades de reloj de memoria admitidas:	1066,1333,1600 MHz
Conexión para refrigerador de CPU:	Ja
Conexiones USB 2.0:	2
Conexión para panel de audio en el frente:	Ja
Conexiones USB 3.2 Gen 1 (3.1 Gen 1):	1
Salida-S/PDIF:	Ja