Blustream UEX50B-KIT Manual de Usario

Lee a continuación 📖 el manual en español para Blustream UEX50B-KIT (6 páginas) en la categoría Niet gecategoriseerd. Esta guía fue útil para 4 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios

Página 1/6
UEX50B-KIT QUICK REFERENCE GUIDE
Contact: support@blustream.com.au | | support@blustream-us.com support@blustream.co.uk
UEX50B-KIT
Quick Reference Guide
01
Our UEX50B-KIT delivers USB 2.0 extension up to 50m over a single CAT cable
while allowing up to 4 USB devices to be connected to a single USB host. Supports
transmittion data bandwidth up to 480Mbps, backwards compatible with USB 1.1
devices.
Introduction
FEATURES:
Extends USB up to a distance of 50m over a single CAT cable
Supports USB 2.0 signal extension
Backwards compatible with USB 1.1 devices
Transmitted data bandwidth up to 480Mbps
1x USB-B on Receiver for connection to host device
4x USB-A hub on Transmitter for conncetion to devices
USB-A ports 1-2 support 5V1A, USB-A ports 3-4 support 5V500mA
Simple plug and play, no driver installation or setup required.
*Signal distribution length subject to length of device and host USB cables and CAT cable type
UEX50B-KIT QUICK REFERENCE GUIDE
www.blustream.com.au | www.blustream-us.com www.blustream.co.uk|02
TX Panel Descriptions
1 CAT Cable Connect to CAT cable and to UEX50B-RX Connection -
2 12V/2A DC Power Input screw type connector
3 Power Status Indicator
4 1A USB Device Connection - USB A connection to connect to high current (up to 1A) USB devices
5 500mA USB Device Connection - USB A connection to connect to low current (up to ) USB devices500mA
6 CAT Cable Connect to CAT cable and to UEX50B-TX Connection -
7 Power Switch - Select between powering the Receiver from the Transmitter (TX) or Host PC that USB is connected to
8 USB Host Connection - USB B connection to connect to PC
9 Power Status Indicator
7 8
4
9
RX Panel Descriptions
21
6
53
Device Cabling
It is important that interconnecting CAT cable between the Transmitter and Receiver is terminated using straight the
correct RJ45 pin configuration. The CAT cable MUST be a ‘straight’ (pin-to-pin) CAT cable.
Please ensure that the USB cabling used with this product is within specifications for both the distance and maximum
/ expected data rate transfer of the equipment in use. Exceeding distances, or using cabling not suitable for the data
transfer, may stop the UEX50B-KIT from working properly.
It is recommended to keep the USB cabling either side of the UEX50B-KIT to a minimum, using the range of the
equipment to run the distance over the CAT cable infrastructure.
UEX50B-KIT QUICK REFERENCE GUIDE
Contact: support@blustream.com.au | | support@blustream-us.com support@blustream.co.uk 03
Schematic

Especificaciones del producto

Marca: Blustream
Categoría: Niet gecategoriseerd
Modelo: UEX50B-KIT

¿Necesitas ayuda?

Si necesitas ayuda con Blustream UEX50B-KIT haz una pregunta a continuación y otros usuarios te responderán




Niet gecategoriseerd Blustream Manuales

Niet gecategoriseerd Manuales

Últimos Niet gecategoriseerd Manuales