Body Bike Connect Manual de Usario

Lee a continuación 📖 el manual en español para Body Bike Connect (15 páginas) en la categoría entrenador de ciclismo. Esta guía fue útil para 3 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios

Página 1/15
BODY BIKE® Connect
K
E
V
L
A
R
®
B
R
A
K
E
L
U
B
R
I
C
A
T
I
O
N
F
R
E
E
Instructions
for your
BODY BIKE® Indoor Cycle
TABLE OF CONTENTS
Equipment required 2
Introduction 3
Certication 4
Warranty 5
Specications 5
General information 6
Assembly
Unpacking 7
Bottom frame 7
Handlebar 8
Bottle holder 8
Console 9
Saddle 9
Pedals 9
Maintenance
Cleaning 10
Sideways play in posts 10
Cleaning the posts 11
Adjustment handles 12
Replace console batteries 12
Replace control box batteries 13
Removal of side covers 13
Replace brake block 14
Resetting 15
Poly-V belt 16
Using the console
On, o and reset 17
Keys 17
Default settings 17
Tips and information 18
Heart rate 19
Age or MHR and weight 20
Watt test 20
Navigation, scan and
the ve screens 22
Troubleshooting 24
Connect to other
ANT+TM devices 26
BODY BIKE® heart rate
transmitter 26
Index 27
INTRODUCTION
For instructions in other
languages go to:
www.body-bike.com
EQUIPMENT REQUIRED
Unpacking: Drill and drill bit
Bottom frame: 13mm wrench
Console: 3 and 4mm Allen Key
Saddle: 14mm wrench
Pedals: 15mm pedal wrench, grease
Cleaning: Tissue paper or cloth,
spray bottle with water, soap
(washing-up liquid), Vaseline oil
Sideways play in posts: A coin,
3mm Allen Key, 32mm wrench
Post cleaning: Cloth, Vaseline oil
Adjustment handle: 5mm Allen
Key, screwdriver, steel brush, grease,
brush
Replace console batteries:
3mm Allen Key
Replace control box batteries:
A coin
Side covers: A coin, 3, 4, 8mm Allen
Keys, 13mm wrench
Brake block: A coin, 8mm wrench,
3mm Allen Key
Calibration: A coin, 8mm wrench
Poly-V belt: A coin, 10mm Allen
Key, 19mm wrench, measuring
device
CERTIFICATION
Federal Communication Commis-
sion Interference Statement
This equipment has been tested and
found to comply with the limits for a
Class B digital device, pursuant to Part
15 of the FCC Rules. These limits are
designed to provide reasonable protec-
tion against harmful interference in
a residential installation. This equip-
ment generates, uses, and can radiate
radio frequency energy and, if not
installed and used in accordance with
the instructions, may cause harmful
interference to radio communications.
However, there is no guarantee that
interference will not occur in a particu-
lar installation. If this equipment does
cause harmful interference to radio or
television reception, which can be de-
termined by turning the equipment o
and on, the user is encouraged to try to
correct the interference by one or more
of the following measures:
•Reorient or relocate the receiving an-
tenna.
• Increase the separation between the
equipment and receiver.
• Connect the equipment into an outlet
on a circuit dierent from that to which
the receiver is connected.
• Consult the dealer or an experi-
enced radio/TV technician for help.
FCC Caution:
This device complies with Part 15 of
the FCC Rules. Operation is subject to
the following two conditions:
(1) This device may not cause harm-
ful interference, and (2) this device
must accept any interference re-
ceived, including interference that
may cause undesired operation.
EU Declaration of Conformity
This device complies with the essen-
tial requirements of the R&TTE Direc-
tive 1999/5/EC. The following test
methods have been applied in order
to prove presumption of conformity
with the essential requirements of
the R&TTE Directive 1999/5/EC:
EN 60950-1:2006+A12:2011
EN 55022+EN 55024(2010)
EN 301 489-1 V1.8.1(2008-04)
EN 301 489-3V1.4.1(2002-08)
EN 300 440-2 V1.3.1(2009-03)
This device is a 2.4 GHz wideband
transmission system (transceiver),
intended for use in all EU member states
and EFTA countries, except in France and
Italy where restrictive use applies.
In Italy the end-user should apply for a li-
cense at the national spectrum authorities
in order to obtain authorization to use the
device for setting up outdoor radio links
and/or for supplying public access to tel-
ecommunications and/or network services.
This device may not be used for setting up
outdoor radio links in France and in some
areas the RF output power may be limited
to 10 mW EIRP in the frequency range of
2454 – 2483.5 MHz. For detailed informa-
tion the end-user should contact the na-
tional spectrum authority in France.
Hereby, BODY BIKE® declares that this Per-
formance Console is in compliance with
the essential requirements and other rel-
evant provisions of Directive 1999/5/EC.
ANT+TM
Performance Console and Control Box is
ANT+ certied.

Especificaciones del producto

Marca: Body Bike
Categoría: entrenador de ciclismo
Modelo: Connect

¿Necesitas ayuda?

Si necesitas ayuda con Body Bike Connect haz una pregunta a continuación y otros usuarios te responderán




entrenador de ciclismo Body Bike Manuales

entrenador de ciclismo Manuales

Últimos entrenador de ciclismo Manuales