Bogen NQ-S181CT-G2 Manual de Usario

Bogen Vocero NQ-S181CT-G2

Lee a continuación 📖 el manual en español para Bogen NQ-S181CT-G2 (8 páginas) en la categoría Vocero. Esta guía fue útil para 2 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios

Página 1/8
740-00123-00B 2006
©2020 Bogen Communications, Inc.
Specications are subject to change.
NQ-S1810CT-G2
Nyquist Gen-2 VoIP
Ceiling Speaker
Installation
With the Nyquist Series Gen-2 VoIP Ceiling Speaker, there is no need
for external ampliers, traditional intercom wiring, or transformer
taps to manually set or adjust. Connect the speaker via Cat5 to a
Power-Over-Ethernet (PoE) Switch or PoE Injector, and it is ready
to use.
The speaker features an integrated 10 watt power amplier, a CAN
Bus interface, a MEMS digital microphone for superior talkback
audio, and a Form C SPDT type 2-amp dry contact relay for
controlling/overriding third-party devices like AV sources.
The speaker also allows DHCP deployment for easy installation.
You can let your Nyquist server automatically discover and
congure your speaker, or you can manually congure it through
the speaker’s web-based user interface (web UI). The web UI also
allows easy updating of rmware and setting of parameters for
Digital Signal Processing (DSP). For more information about the web
UI, refer to the Nyquist Gen-2 VoIP Speakers Conguration Manual.
NQ-S1810WT-G2
Nyquist Gen-2 VoIP
Ceiling Speaker
Installation Manual
Speaker Layout
The layout of the speakers should be planned before installation begins.
Layout starts in one corner of the room. The rst speaker should be
positioned from each wall spaced a distance approximately equal to the
ceiling height of the room.
The next speaker in should be spaced a distance approximately Row 1
equal to twice the height of the ceiling. Each additional speaker in the row
should use this same spacing.
Row 2 starts at twice the ceiling height distance from row 1 and twice
the ceiling height from the wall. The other speakers in this row are also
spaced at twice the ceiling height.
Row 3 is again spaced at twice the ceiling height from the previous row.
The rst speaker starting this row is positioned at one ceiling height
distance from the wall (similar to row 1).
Continue this pattern of alternating rows until the room is covered. The
spacing of the speakers can be adjusted so that the speakers are evenly
spaced in a row and are aesthetically pleasing.

Especificaciones del producto

Marca: Bogen
Categoría: Vocero
Modelo: NQ-S181CT-G2

¿Necesitas ayuda?

Si necesitas ayuda con Bogen NQ-S181CT-G2 haz una pregunta a continuación y otros usuarios te responderán




Vocero Bogen Manuales

Bogen

Bogen AE-2s2 Manual de Usario

29 Septiembre 2024
Bogen

Bogen NEAR S5T Manual de Usario

23 Septiembre 2024
Bogen

Bogen G8G Manual de Usario

20 Septiembre 2024
Bogen

Bogen R8 Manual de Usario

18 Septiembre 2024
Bogen

Bogen MPS1 Manual de Usario

18 Septiembre 2024
Bogen

Bogen OCS1 Manual de Usario

18 Septiembre 2024
Bogen

Bogen AFI-8 Manual de Usario

14 Septiembre 2024
Bogen

Bogen CSD1X2 Manual de Usario

10 Septiembre 2024

Vocero Manuales

Últimos Vocero Manuales