Bose SoundLink Flex 2nd Gen Manual de Usario

Bose Base/estación de acoplamiento SoundLink Flex 2nd Gen

Lee a continuación 📖 el manual en español para Bose SoundLink Flex 2nd Gen (43 páginas) en la categoría Base/estación de acoplamiento. Esta guía fue útil para 9 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios

Descargar PDF
Página 1/43
SOUNDLINK FLEX PORTABLE SPEAKER (2ND GEN)
IMP O RTA N T SA F E T Y I N ST R U CT I O N S
2
|
E N G
Please read and keep all safety and use instructions.
Bose Corporation hereby declares that this product is in compliance with the essential requirements
and other relevant provisions of Directive 2014/53/EU and all other applicable EU directive
requirements. The complete declaration of conformity can be found at: www
www
www
www.Bose.com/
.Bose.com/
.Bose.com/
.Bose.com/compliance
compliance
compliance
compliance
www.Bose.com/compliance
This product conforms to all applicable Electromagnetic Compatibility Regulations 2016 and all other
applicable UK regulations. The complete declaration of conformity can be found at:
www
www
www
www.Bose.com/
.Bose.com/
.Bose.com/
.Bose.com/compliance
compliance
compliance
compliance
www.Bose.com/compliance
Bose Corporation hereby declares that this product is in compliance with the essential requirements per Radio
Equipment Regulations 2017 and all applicable UK regulations. The complete declaration of conformity can be
found at: www
www
www
www.Bose.com/compliance
.Bose.com/compliance
.Bose.com/compliance
.Bose.com/compliance
www.Bose.com/compliance
Important Safety Instructions
If the speaker is exposed to salt or chlorinated water, gently rinse with fresh water following the exposure to
remove residue. Make sure the connector port is fully dried out before charging.
Clean only with a dry cloth or water dampened cloth. Do not use cleaning products.
Only use aachments/accessories specified by the manufacturer.
Refer all servicing to qualified personnel. Servicing is required when the apparatus does not operate normally,
or has been physically damaged.
WARNINGS/CAUTIONS
Contains small parts which may be a choking hazard. Not suitable for children under age 3.
This product contains magnetic material. Consult your physician on whether this might aect your
implantable medical device.
• Keep the product away from fire and heat sources. Do NOT place naked flame sources, such as lighted
candles, on or near the product.
• Do NOT make unauthorized alterations to this product.
• Use this product only with an agency- approved LPS power supply that meets local regulatory requirements
(e.g., UL, CSA, VDE, CCC).
• The baery provided with this product may present a risk of fire, explosion or chemical burn if mishandled,
incorrectly replaced or replaced with an incorrect type.
• Do not expose products containing baeries to excessive heat (e.g. from storage in direct sunlight, fire or
the like).
• If the baery leaks, do not allow the liquid to come in contact with the skin or eyes. If contact is made, seek
medical advice.
• The product label is located on the back of the product.
REG U L ATO RY A N D L EG A L I N F ORMAT I O N
3
|
E N G
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against
harmful interference in a residential installation. This equipment generates, uses, and can radiate radio
frequency energy and, if not installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to radio or television reception, which
can be determined by turning the equipment o and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
• Reorient or relocate the receiving product or antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit dierent from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
Changes or modifications not expressly approved by Bose Corporation could void the user’s authority to
operate this equipment.
This device complies with part 15 of the FCC Rules and with ISED Canada’s license-exempt RSS standard(s).
Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may cause
undesired operation.
This device complies with FCC and ISED Canada radiation exposure limits set forth for the general population.
This transmier must not be co-located or operating in conjunction with any other antenna or transmier.
CAN ICES-3(B)/NMB-3(B)
For Europe: Frequency band of operation 2400 to 2483.5 MHz. | Maximum transmit power less than 20
dBm EIRP.
Maximum transmit power is below regulatory limits such that SAR testing is not necessary and exempt per
applicable regulations.
This symbol means the product must not be discarded as household waste, and should be delivered to
an appropriate collection facility for recycling. Proper disposal and recycling helps protect natural
resources, human health and the environment. For more information on disposal and recycling of this
product, contact your local municipality, disposal service, or the shop where you bought this product.
Low-power Radio-frequency Devices Technical Regulations: Without permission granted by the NCC, any
company, enterprise, or user is not allowed to change frequency, enhance transmiing power or alter original
characteristic as well as performance to a approved low power radio-frequency devices. The low power
radio-frequency devices shall not influence aircraft security and interfere legal communications; If found,
the user shall cease operating immediately until no interference is achieved. The said legal communications
means radio communications is operated in compliance with the Telecommunications Management Act. The
low power radio-frequency devices must be susceptible with the interference from legal communications or
ISM radio wave radiated devices. The low power radio-frequency devices must be susceptible with the
interference from legal communications or ISM radio wave radiated devices.
DON’T aempt to remove the rechargeable lithium-ion baery from this product. Contact your local Bose
retailer or other qualified professional for recycling and disposal.
Please dispose of used baeries properly, following local regulations. Do not incinerate.

Especificaciones del producto

Marca: Bose
Categoría: Base/estación de acoplamiento
Modelo: SoundLink Flex 2nd Gen

¿Necesitas ayuda?

Si necesitas ayuda con Bose SoundLink Flex 2nd Gen haz una pregunta a continuación y otros usuarios te responderán


Base/estación de acoplamiento Bose Manuales

Bose

Bose SoundLink Flex 2nd Gen Manual de Usario

26 Septiembre 2024
Bose

Bose SoundLink Mini II Manual de Usario

8 Agosto 2024
Bose

Bose SoundDock XT Manual de Usario

31 Julio 2024
Bose

Bose SoundDock Series II Manual de Usario

28 Julio 2024

Base/estación de acoplamiento Manuales

Últimos Base/estación de acoplamiento Manuales

Pyle

Pyle PHST92IBK Manual de Usario

20 Octubre 2024
Roberts

Roberts R100 Manual de Usario

19 Octubre 2024
Yamaha

Yamaha ISX-800 Manual de Usario

17 Octubre 2024
Polk

Polk BOOM Bit Manual de Usario

16 Octubre 2024
Vorago

Vorago KSP-600 Manual de Usario

8 Octubre 2024
IDance

IDance Mini Blaster 2L Manual de Usario

7 Octubre 2024
Pyle

Pyle PWPBT05BL Manual de Usario

5 Octubre 2024
Ewent

Ewent EW7018 Manual de Usario

5 Octubre 2024
Jam

Jam Splash Manual de Usario

5 Octubre 2024
Denver

Denver BTG-615 Manual de Usario

5 Octubre 2024