Boss AD-10 Manual de Usario

Boss amplificador de guitarra AD-10

Lee a continuación 📖 el manual en español para Boss AD-10 (14 páginas) en la categoría amplificador de guitarra. Esta guía fue útil para 2 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios

Descargar PDF
Página 1/14
Copyright © 2017 ROLAND CORPORATION
Owner’s Manual
The AD-10 is designed for the acoustic guitarist who performs live; in a single unit, it combines a preamp, eects, looper, and
direct box.
Contents
Getting Ready . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Connecting the Equipment . . . . . . . . . . . . . . . . . . . . 2
Connecting a Footswitch or an Expression Pedal . . . . 3
Turning On/O the Power . . . . . . . . . . . . . . . . . . . . . 3
Input Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Adjusting the Input Sensitivity . . . . . . . . . . . . . . . 4
Switching Between GUITAR IN 1/2 and
Adjusting the Balance . . . . . . . . . . . . . . . . . . . . . . 4
Tuning the Guitar (Tuner) . . . . . . . . . . . . . . . . . . . . . 4
Manual/Memory Mode . . . . . . . . . . . . . . . . . . . . . . 5
Manual Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Memory Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Saving a Memory . . . . . . . . . . . . . . . . . . . . . . . . . 5
Initializing Memory Settings . . . . . . . . . . . . . . . . . 5
Editing the Eects . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
EQ (Equalizer) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
BOOST . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
FX LOOP . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
ANTI-FEEDBACK. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
ACOUSTIC RESONANCE . . . . . . . . . . . . . . . . . . . . . . . 7
COMP (Compressor) . . . . . . . . . . . . . . . . . . . . . . . . . 7
DELAY/CHORUS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
AMBIENCE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
Sub-Parameter Settings . . . . . . . . . . . . . . . . . . . . . . . 8
Looper . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
Advanced Settings . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Output Setting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Ambience Output Settings . . . . . . . . . . . . . . . . . . 10
Stomp Pedal Setting . . . . . . . . . . . . . . . . . . . . . . . . . 11
System Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
Making Independent EQ Settings for GUITAR
IN 1 and 2 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
Assigning the Functions of the Pedals. . . . . . . . . . 12
Other Functions . . . . . . . . . . . . . . . . . . . . . . . . . . 12
Restoring the Factory Settings (Factory Reset) . . . . . . 13
Appendices . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
Main Specications . . . . . . . . . . . . . . . . . . . . . . . . . . 14
USING THE UNIT SAFELY . . . . . . . . . . . . . . . . . . . . . . 14
IMPORTANT NOTES . . . . . . . . . . . . . . . . . . . . . . . . . . 14
Before using this unit, carefully read “USING THE UNIT SAFELY” and “IMPORTANT NOTES” (the leaet “USING THE UNIT SAFELY” and the Owner’s
Manual p. 14)). After reading, keep the document(s) where it will be available for immediate reference.
2
Getting Ready
Connecting the Equipment
* To prevent malfunction and equipment failure, always turn down the volume, and turn o all the units before making any connections.
Rear Panel
USB COMPUTER port
Use a commercially available USB 2.0 cable to connect
this port to your computer so that audio can be sent and
received between the AD-10 and the computer. You can
record the AD-10’s sound into your
computer, or output sound from your
computer via the AD-10’s output jacks.
SEND, RETURN jacks
Connect an external eect device (mono).
Connect the SEND jack to the input of your external eect
device, and connect the output of your external eect
device to the RETURN jack.
LINE OUT (L/PHONES, R/MONO) jacks
Connect these jacks to your guitar amp or headphones.
* Connect your headphones to the L/PHONES jack.
* If using a mono connection, use only the R/MONO jack.
XLR OUT (L, R) jacks
Connect to the PA etc.
* Pin assignment of XLR OUT (L, R) jack.
1 GND 2 HOT
3 COLD
DC IN jack
Connect the included AC adaptor here.
* We recommend that you keep batteries
installed in the unit even though you’ll be
powering it with the AC adaptor. That way,
you’ll be able to continue a performance even
if the cord of the AC adaptor gets accidentally
disconnected from the unit.
GUITAR IN (1, 2) jacks
Connect your guitar.
You can use the two jacks to blend two dierent types of
pickups, or to connect two guitars.
Subsequently attached pickup
Built-in pickup SEND0INPUT
RETURN1OUTPUT
3
Getting Ready
Turning On/O the Power
Before you make connections, make sure that the input gain or volume of your mixer or amplier is turned down.
By turning on devices in the wrong order, you risk causing malfunction and/or damage to speakers and other devices.
* Before turning the unit on/o, always be sure to turn the volume down. Even with the volume turned down, you might hear
some sound when switching the unit on/o. However, this is normal and does not indicate a malfunction.
* When the batteries run low, the display indicates “
Bt” When this occurs, install fresh batteries.
Connecting a Footswitch or an Expression Pedal
If you connect a footswitch (FS-5U, FS-6, FS-7: sold separately) or expression pedal (FV-500H, FV-500L, EV-30, Roland EV-5: sold separately)
to the CTL1,2/EXP jack, you'll be able to assign a variety of functions to it. “Assigning the Functions of the Pedals” (p. 12)
* Use only the specied expression pedal. By connecting any other expression pedals, you risk causing malfunction and/or
damage to the unit.
FS-7
FS-6 EV-30, EV-5FS-5U
FS-5U
1/4” phone type
10
1/4” phone type
Stereo 1/4” phone type
10
1/4” phone type x 2
Stereo 1/4” phone type
10
Stereo 1/4” phone

Especificaciones del producto

Marca: Boss
Categoría: amplificador de guitarra
Modelo: AD-10

¿Necesitas ayuda?

Si necesitas ayuda con Boss AD-10 haz una pregunta a continuación y otros usuarios te responderán


amplificador de guitarra Boss Manuales

Boss

Boss KATANA HEAD GEN 3 Manual de Usario

16 Septiembre 2024
Boss

Boss KATANA-100 GEN 3 Manual de Usario

16 Septiembre 2024
Boss

Boss KATANA ARTIST HEAD GEN 3 Manual de Usario

16 Septiembre 2024
Boss

Boss KATANA-50 EX GEN 3 Manual de Usario

16 Septiembre 2024
Boss

Boss KATANA-50 GEN 3 Manual de Usario

16 Septiembre 2024
Boss

Boss KATANA-100/212 GEN 3 Manual de Usario

16 Septiembre 2024
Boss

Boss KATANA:GO Manual de Usario

14 Septiembre 2024
Boss

Boss Katana 100 MKII Manual de Usario

13 Septiembre 2024
Boss

Boss CUBE-10GX Manual de Usario

12 Septiembre 2024
Boss

Boss Nextone Artist Manual de Usario

30 Agosto 2024

amplificador de guitarra Manuales

Últimos amplificador de guitarra Manuales

Blackstar

Blackstar CabRig Manual de Usario

21 Octubre 2024
Blackstar

Blackstar ID:CORE Stereo 10 V4 Manual de Usario

21 Octubre 2024
Fender

Fender Pano Verb Amp Manual de Usario

3 Octubre 2024
Fender

Fender Champion II 50 Manual de Usario

3 Octubre 2024
Fender

Fender Champion II 100 Manual de Usario

3 Octubre 2024
Fender

Fender Champion II 25 Manual de Usario

3 Octubre 2024
Fender

Fender Mustang Micro Plus Manual de Usario

3 Octubre 2024
Marshall

Marshall MG100DFX Manual de Usario

22 Septiembre 2024
Marshall

Marshall Supervibe Manual de Usario

21 Septiembre 2024
Peavey

Peavey Classic 50 Manual de Usario

19 Septiembre 2024