Boss CAM21 Manual de Usario

Boss Cámara para salpicadero CAM21

Lee a continuación 📖 el manual en español para Boss CAM21 (2 páginas) en la categoría Cámara para salpicadero. Esta guía fue útil para 4 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios

Descargar PDF

Página 1/2

USER’S MANUAL

CAM21

MINI DIGITAL CAMERA

DO NOT FULLY RELY ON REVERSE CAMERA

WHEN BACKING UP.

ALWAYS CHECK YOUR SURROUNDINGS

BEFORE BACKING UP.

BOSS Audio Systems

3451 Lunar Court • Oxnard, CA 93030

www.bossaudio.com | 800.999.1236

tech support: www.bossaudio.com/support

0714

SPECIFICATIONS

Power Supply DC9V - 15V

Lens Angle (Deg.) 170º

TV System PAL/NTSC

Video Output 1.0vp-p, 75Ω

S/N Ratio ≥ 48 dB

IP Rating IP68

Operating Temp. (Deg. C) -30ºC ~ +70ºC (RH95% Max.)

White Balance Auto

Minimum Illumination 0.5 LUX

AGC Auto

Resolution (TV Lines) 420

Electronic Shutter 1/60(NTSC) 1/50(PAL)

1/10,000 Second

Eﬀective Pixels 656*492

Above parameters can be modiﬁed without notiﬁcation.

TROUBLESHOOTING GUIDE

The following checklist might help to solve the problems when using this unit.

Please double check to insure connection and procedure of operation is done

properly before using checklist.

PROBLEM CAUSE/SOLUTION

Check that power cable is securely connected.

Check to insure there is a good connection between

NO IMAGE video-in and monitor.

Check that REVERSE GEAR is engaged.

Check to insure correct monitor setup.

IMAGE BLURRING Check for water/water stain or dust on camera lens.

Clean camera lens

IMAGE SHAKING Check to insure camera is mounted and secured tightly.

IMAGE SLANTED Adjust camera mounting bracket

INSTALLATION

Complete all required connections so that all lines are hidden in vehicle.

Power/Video

Red and black back lights 12V line

Camera

DC 12V

NOTE:

If problems persist – consult nearest service dealer. DO NOT attempt to

disassemble or modify unit.

1. WIRE CONNECTION

2. CAMERA INSTALLATION

Camera should be installed in the following conﬁguration:

Flush Mount – Install the camera using the supplied Hole Saw. Camera

should be mounted where it will not interfere with taillights, visibility of

license plate or other safety items. (see diagram 1)

Attention: Camera switch is controlled by engaging REVERSE GEAR.

Vehicle Body

(diagram 1)

Especificaciones del producto

Marca:	Boss
Categoría:	Cámara para salpicadero
Modelo:	CAM21
Color del producto:	Wit
Ancho:	220 mm
Profundidad:	220 mm
Altura:	439 mm
Peso del embalaje:	- g
Amable:	Afvalverwerkingssysteem voor gootstenen
Certificación:	CE
Contenido:	- ml
Velocidad de rotación:	- RPM
Protección de sobrecarga:	Ja
Potencia-del-motor:	1.25 hp
Tipo de tránsito:	Doorlopende toevoer