Brinsea Octagon 20 ECO Manual de Usario

Brinsea No categorizado Octagon 20 ECO

Lee a continuación 📖 el manual en español para Brinsea Octagon 20 ECO (78 páginas) en la categoría No categorizado. Esta guía fue útil para 4 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios

Descargar PDF

Página 1/78

AE21 GB Issue 02

Octagon 20 Eco and Octagon 40 Eco

egg incubators

User instructions

Contents

Section Subject Page

1 Introduction 2

2 Unpacking 2

3 Location, Installation and Temperature 3

4 Storage of eggs 5

5 Humidity and Ventilation 5

6 Egg setting 8

7 Egg turning 8

8 Hatching 8

9 Cleaning up 9

10 Servicing 9

11 10 Troubleshooting

12 11 Speciﬁcations

AE21 GB Issue 02

1 Introduction

Read the instructions before use.

These instructions detail the operation of your new Octagon 20 Eco or Octagon 40 Eco incubator and optional

Autoturn Cradle. Please read these instructions carefully before setting up your machine to achieve best results

and keep these instructions safe for future reference. This document includes recommended procedures for

successful hatching but incubation involves the control and manipulation of a large number of factors and in

certain circumstances diﬀerent procedures may be necessary. Your incubator is designed to allow the user to

vary the incubation conditions to suit a wide range of species in diﬀerent ambient conditions and the speciﬁc set-

up for every situation is beyond the scope of these instructions.

There is a range of books available covering incubation techniques, for more information or to request a book list

please don’t hesitate to contact us.

DO NOT COVER THE INCUBATOR. FOR INDOOR USE ONLY. THE INCUBATOR MUST BE PLACED

IN AN AREA NOT SUBJECT TO SPLASHES OF WATER OR WET CONDITIONS AND OUT OF REACH

OF ANIMALS AND CHILDREN.

Fig. 1 Functional features of the Octagon 20 Eco (Octagon 40 Eco functionally similar)

2 Unpacking

Your incubator has been supplied in protective packaging. Please remove all tape, strapping and packing from

the incubator and parts. Retain the carton and packing materials to enable the unit to be repacked.

Your incubator will include as standard:

Quantity (Octagon 20 Eco) Quantity (Octagon 40 Eco) Item

1 1 Incubator (including removable lid)

1 2 Egg tray

1 1 Cable cover and screw

1 1 Mains cable

6 Wire egg dividers 12

Autoturn Cradle

Temperature Control

Housing

Heater Indicator LED

Adjustable Air Vent

Turning Motor

Housing

Cable / Adjustment

Spindle Cover

(remove to access

tamper-proof

temperature adjuster)

Liquid- -glass in

Thermometer

AE21 GB Issue 02

Optional Autoturn Cradle:-

2 Base bars

1 Motorised cradle end

1 Plain cradle end

1 Set of four bolts

2.1 Please identify each part and check that they are all present and undamaged. If there are any parts

damaged or missing please contact your retailer or Brinsea Products (at the address at the end of the

document). Damaged appliances shall not be used.

2.2 Check also that the electrical supply matches the machine’s requirements (marked on the technical label

on the inside of the lid of the incubator and on the inside of the blank Autoturn cradle end). The power

cord set must be an appropriately rated and approved cord-set in accordance with the regulations of the

country it is used in.

2.3 To register your new Brinsea product please visit www.brinsea.co.uk and follow the link on the right

hand side of the home page to qualify for your free 2 year guarantee.

2.4 Go to www.Brinsea.co.uk and register as a free member of the Brinsea Email Group to receive the latest

news and information such as advance notice about new products, special oﬀers, exclusive competitions

and much more.

3 Location, Installation and Temperature

3.1 Your incubator will give best results in a room free from wide temperature variations and with generous

ventilation particularly if several incubators are running at the same time. Ensure that the room –

temperature cannot drop on a cold night. Ideally thermostatically control the room at between 20 and

25°C (68 and 77°F). Never allow the room temperature to drop below 15°C (59°F) and ensure that the

incubator cannot be exposed to direct sunlight. Do not use your incubator on the ﬂoor.

3.2 If using the Autoturn cradle: Assemble the Autoturn cradle in accordance with the diagram below (Fig. 2)

and place on a ﬂat, level surface (workbench height is ideal). Place the incubator into the Autoturn cradle

as illustrated (Fig. 1). The cabinet is designed to locate onto the lugs at either end of the Autoturn cradle.

Take care to oﬀer the incubator at the angle which matches that of the drive lug to avoid damage to the

mechanism. Ensure full engagement in the slots in the ends of the incubator so that the incubator is level

end to end.

FIG. 2

3.3 If using without the Autoturn cradle place the incubator upright on a ﬂat level surface.

3.4 Remove the lid and place it where it can not be splashed by water. Lift out the egg tray and ﬁll one of the

two water channels (Octagon 20) or two of the four water channels (Octagon 40) with water or 100:1

Brinsea Incubation Disinfectant Solution leaving the top of the liquid 3/4” (20mm) from the top of the

channel. Replace the tray and replace the lid. Slide the ventilation control to the centre of its range.

Especificaciones del producto

Marca:	Brinsea
Categoría:	No categorizado
Modelo:	Octagon 20 ECO
Color del producto:	Zwart
Pantalla incorporada:	Nee
Peso.:	30 g
Ancho:	30 mm
Profundidad:	60 mm
Altura:	10 mm
Banda de frecuencia:	2.4 GHz
Interfaz:	RF Draadloos
Temperatura de almacenamiento:	-40 - 70 °C
Rango maximo:	20 m
Humedad de almacenamiento:	5 - 90 procent
Rango de temperatura de funcionamiento:	32 - 104 °F
Tipo de entrada:	Drukknopen
Uso correcto del mando a distancia.:	PC
Temperatura de funcionamiento (TT):	0 - 40 °C
Humedad relativa de funcionamiento (VV):	10 - 90 procent
Tipo de Batería:	CR2032
Código del Sistema Armonizado (SA):	85299097
Número de dispositivos compatibles:	1
Rango de temperatura de almacenamiento (TT):	-40 - 158 °F