Brother LX2375 Manual de Usario

Lee a continuación 📖 el manual en español para Brother LX2375 (96 páginas) en la categoría máquina de coser. Esta guía fue útil para 5 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios

Página 1/96
Product Code: 885-403
Be sure to read this document before using the machine.
We recommend that you keep this document nearby for future reference.
1
IMPORTANT SAFETY INSTRUCTIONS
When using the sewing machine, basic safety precautions should always be followed,
including the following:
“Read all instructions before using.”
DANGER – To reduce the risk of electric shock:
1. The sewing machine should never be left unattended when plugged in.
Always unplug this sewing machine from the electrical outlet immediately
after using and before cleaning.
2. Always unplug before changing the light bulb. Replace bulb with same type
rated 15 watts.
WARNINGTo reduce the risk of burns, fire, electric
shock, or injury to persons:
1. Do not allow this machine to be used as a toy. Close attention is necessary
when the sewing machine is used by or near children.
2.
Use this sewing machine only for its intended use as described in this manual. Use
only accessories recommended by the manufacturer as contained in this manual.
3. Never operate this sewing machine if it has a damaged cord or plug, if it is not
working properly, if it has been dropped or damaged, or dropped into water.
Return the sewing machine to the nearest authorized dealer or service center
for examination, repair, electrical or mechanical adjustment.
4. Never operate the sewing machine with any of the air openings blocked. Keep
the ventilation openings of the sewing machine and foot controller free from
the accumulation of lint, dust and loose cloth.
5. Never drop or insert any object into any openings.
6. Do not use this machine outdoors.
7. Do not operate this machine where aerosol (spray) products are being used or
where oxygen is being administered.
8. To disconnect, turn the main switch to the symbol “O” position which
represents off, then remove plug from outlet.
9
. Do not unplug by pulling on the cord. To unplug, grasp the plug and pull, not the cord.
10.Keep fingers away from all moving parts. Special care is required around the
sewing machine needle.
11
.Always use the proper needle plate. The wrong plate can cause the needle to break.
12.Do not use a bent needle.
13.Do not pull or push the fabric while stitching. It may deflect the needle
causing it to break.
14.Switch the sewing machine to the off, symbol “O” position when making any
adjustments in the needle area, such as threading the needle, changing the
needle, threading the bobbin, or changing the presser foot.
15.Always unplug the sewing machine from the electrical outlet when removing
covers, lubricating, or when making any other user service adjustments
mentioned in this instruction manual.
16.This sewing machine is not intended for use by young children or impaired
persons without supervision.
2
17.Young children should be supervised to ensure that they do not play with this
sewing machine.
SAVE THESE INSTRUCTIONS
This sewing machine is intended for household use.
This appliance is not intended for use by persons (including children) with reduced physical, sensory
or mental capabilities, or lack of experience and knowledge, unless they have been given
supervision or instruction concerning use of the appliance by a person responsible for their safety.
Children should be supervised to ensure that they do not play with the appliance.
CONGRATULATIONS ON CHOOSING OUR MACHINE
To fully enjoy all the features, we suggest that you study the manual before using the machine.
PLEASE READ BEFORE USING THIS MACHINE
For safe operation
1. Be sure to keep your eye on the needle while sewing. Do not touch the handwheel, thread take-
up lever, needle, or other moving parts.
2. Remember to turn off the power switch and unplug the cord when:
Operation is completed
Replacing or removing the needle or any other parts
A power failure occurs during use
Maintaining the machine
Leaving the machine unattended
3. Do not store anything on the foot controller.
4. Plug the machine directly into the wall. Do not use extension cords.
For a longer service life
1. When storing this machine, avoid direct sunlight and high humidity locations. Do not use or
store the machine near a space heater, iron, halogen lamp, or other hot objects.
2. Use only neutral soaps or detergents to clean the case. Benzene, thinner, and scouring powders
can damage the case and machine, and should never be used.
3. Do not drop or hit the machine.
4. Always consult the operation manual when replacing or installing any assemblies, the presser
feet, needle, or other parts to assure correct installation.
For repair or adjustment
In the event a malfunction occurs or adjustment is required, first follow the troubleshooting table in
the back of the operation manual to inspect and adjust the machine yourself. If the problem persists,
please consult your local authorized Brother dealer.
For additional product information and updates, visit our web site at www.brother.com
The contents of this manual and specifications of this product are subject to change without notice.
FOR USERS IN THE UK, EIRE, MALTA AND CYPRUS ONLY
IMPORTANT
In the event of replacing the plug fuse, use a fuse approved by ASTA to BS 1362, i.e. carrying
the mark, rating as marked on plug.
Always replace the fuse cover. Never use plugs with the fuse cover omitted.
If the available electrical outlet is not suitable for the plug supplied with this equipment, you
should contact your authorized dealer to obtain the correct lead.

Especificaciones del producto

Marca: Brother
Categoría: máquina de coser
Modelo: LX2375

¿Necesitas ayuda?

Si necesitas ayuda con Brother LX2375 haz una pregunta a continuación y otros usuarios te responderán




máquina de coser Brother Manuales

máquina de coser Manuales

Últimos máquina de coser Manuales