Caliber RDD843BT Manual de Usario

Lee a continuación 📖 el manual en español para Caliber RDD843BT (21 páginas) en la categoría Radio del coche. Esta guía fue útil para 16 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios

Página 1/21
Keep the volume level Iow enough to aware of the road and traffic
conditions.
Do not expose the product to water or excessive moisture. This could
cause electrical shorts, fire or other damage.
Warnings
When Driving
When Car Washing
To reduce the risk of fire or electric shock, do not expose this equipment
to rain or moisture.
To reduce the risk of fire or electric shock, and annoying interference,
use only the recommended accessories.
This device is intended for continuous operation.
In order to avoid any accident, the driver must not watch video
while driving. This unit is designed to not allow watching video
while driving. Park your car in a safe place and engage the
'parking brake' before watching video.
CAUTION
Parking in direct sunlight can produce very high temperatures inside your
vehicle. Give the interior a chance to cool down before starting playback.
This product is designed to operate with a 12 volt DC, negative ground
battery system (the regular system in a North American car).
Avoid inserting any foreign objects into the slot of this player. Failure to
follow this may cause malfunction or permanent damage due to the
precise mechanism of this unit.
When Parked
Use the Proper Power Supply
Protect the Disc Mechanism
THIS MOBILE DVD PLAYER IS A CLASS I LASER PRODUCT. THIS
UNIT USES A VISIBLE/INVISIBLE LASER BEAM WHICH COULD
CAUSE HAZARDOUS RADIATION IF EXPOSED DIRECTLY. BE
SURE TO OPERATE THE MOBILE DVD PLAYER CORRECTLY AS
INSTRUCTED.
USE OF CONTROLS OR ADJUSTMENTS OR PERFORMANCE OR
PROCEDURES OTHER THAN THOSE SPECIFIED HEREIN MAY
RESULT IN HAZARDOUS RADIATION EXPOSURE.
DO NOT OPEN COVERS AND DO NOT REPAIR BY YOURSELF
PLEASE REFER SERVICING TO A QUALIFIED TECHNICIAN.
This product incorporates copyright protection technology that is
protected by method claims of certain U.S. Patents and other intellectual
property rights owned by Macrovision Corporation and other rights
owners. Use of this copyright protection technology must be authorized
by Macrovision Corporation, and is intended for home and other limited
viewing uses only unless
otherwise authorized by Macrovision Corporation. Reverse engineering
or disassembly is prohibited.
NOTE
E - 2
CAUTION
1. Before finally installing the unit, connect the wiring temporarily and
make sure it is all connected up properly and the unit and system work
properly.
2. Use only the parts included with the unit to ensure proper installation.
The use of un-authorized parts can cause mal functions.
3. Consult with your nearest dealer if install-ation requires the drilling of
holes or other modifications of the vehicle.
4. Install the unit where it does not get in the driver's way and cannot
injure the passenger if there is a sudden stop, like an emergency stop.
5. If installation angle exceeds 30° from horizontal, the unit might not give
its optimum performance.
6. Avoid installing the unit where it would be subject to high temperature,
such as from direct sunlight, or from hot air, from heater, or where it
would be subject to dust dirt or excessive vibration.
After inserting the half sleeve into the dashboard, select the appropriate
tab according to the thickness of the dashboard material and bend them
inwards to secure the holder in place.
Installation using the screw holes on the side of
the unit
Select a position where the screw holes of the bracket and the screw
holes of the main unit become aligned (are fitted) and tighten the screws
at 2 places on each side.
Screw
Screw
Factory radio
mounting
bracket
Hook
Hook
Installation
INSTALLATION CAUTION
E - 3
Installation with the half sleeve
182
111
Dashboard
Half Sleeve
Screw
Attach the trim ring
Trim ring
Dashboard or
console
The outer trim ring, and half-sleeve are not used
for this installation.
The mounting box, metal half-sleeve, hook &
screws are not included in the packing.
NOTE
Attached the Front Panel
1
2
To attach the front panel back to the
unit chassis, please insert the right side
of the panel in the chassis until it is
correctly engaged. Press the left side
of the panel until the mechanism locks
it into place.

Especificaciones del producto

Marca: Caliber
Categoría: Radio del coche
Modelo: RDD843BT

¿Necesitas ayuda?

Si necesitas ayuda con Caliber RDD843BT haz una pregunta a continuación y otros usuarios te responderán




Radio del coche Caliber Manuales

Radio del coche Manuales

Últimos Radio del coche Manuales