Caliber RMN801BT Manual de Usario

Caliber navegador RMN801BT

Lee a continuación 📖 el manual en español para Caliber RMN801BT (42 páginas) en la categoría navegador. Esta guía fue útil para 11 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios

Descargar PDF

Página 1/42

Remove the Old Unit from the Dashboard

DIN Front Mount

DO NOT DISCONNECT WIRES

AT THIS TIME!

2. Insert the keys supplied with the

old unit into both sides of the unit

as shown in figure below until

they click. Pull to remove the old

unit from the dashboard.

1. Remove the outer trim frame.

INSTALLATION

Tools for Installation

Use the 2 removal wrenches of the old unit to take out the old unit and place with this brand new car radio. The following tools and sup-

plies may also be needed for the installation:

Tools for Installation: Philips Screw-drivers /Machine Screws /Wire Stripper /Wire Cutter /Hammer /Pencil /Electrical Tape /Electric Drill

Supplies for Installation: Machine Screws /Crimp Connectors /14 Gauge Wire for Power Connections /14-16 Gauge Speaker Wires

The above are not supplied.

Before you install

Automotive audio equipment installations can be challenging even to the most experienced of installation technicians. We strongly rec-

ommend that this unit should be professionally installed by a VAT registered installer (this is a requirement to validate the warranty).

IMPORTANT: Remove the two transport screws from the top fo the unit before installing.

Mark Polarity of the Speaker Wires

Marking the polarity of the speaker wires will make it easier to connect the existing speakers to your car radio. Consult wiring diagram

of existing head unit before disconnecting any wires. If you are not positive of the polarity of the existing wires from the speakers to the

head unit, install new wires.

1. While the old unit is playing, disconnect the wires from one speaker.

2. Take a length of masking tape and fold it around the wire so it forms a flag.

3. On the masking tape mark the polarity of the speaker wires (+&-), as well as left or right, and front or rear.

4. Double check that you marked the first speaker correctly by checking that the speaker wires are the same at the head unit.

5. Repeat this procedure for all of the speakers.

6. Mark the power, ground, and any other wires also.

Especificaciones del producto

Marca:	Caliber
Categoría:	navegador
Modelo:	RMN801BT
Color del producto:	Wit
Pantalla incorporada:	Nee
Peso.:	14300 g
Ancho:	656 mm
Profundidad:	458 mm
Altura:	158 mm
Puerto USB:	Ja
versión USB:	2.0
Tipo de sensor de imagen:	CCD
Voltaje de entrada:	100 - 120 V
Soporta Windows:	Windows 10, Windows 11, Windows 7, Windows 8, Windows Vista, Windows XP
Tipo de comida:	AC
Temperatura de almacenamiento:	-25 - 60 °C
Soporta el sistema operativo Mac:	Mac OS X 10.10 Yosemite, Mac OS X 10.15 Catalina, Mac OS X 10.15.3 Catalina, Mac OS X 10.7 Lion, Mac OS X 10.8 Mountain Lion, Mac OS X 10.9 Mavericks
Humedad de almacenamiento:	10 - 85 procent
tipo de escáner:	Flatbed scanner
Resolución de escaneo óptico:	2400 x 4800 DPI
Tamaño máximo de papel ISO serie A:	A3
Sistemas operativos de servidor compatibles:	Windows Server 2003, Windows Server 2008, Windows Server 2008 R2, Windows Server 2012 R2
Tamaño máximo de escaneo:	310 x 437 mm
Ciclo de servicios diario (máx.):	100000 pagina's
Consumo de energía (típico):	27 W
Temperatura de funcionamiento (TT):	5 - 35 °C
Humedad relativa de funcionamiento (VV):	10 - 80 procent
Fuente de luz:	ReadyScan LED