Camec IWH-1.5 Manual de Usario

Camec No categorizado IWH-1.5

Lee a continuación 📖 el manual en español para Camec IWH-1.5 (12 páginas) en la categoría No categorizado. Esta guía fue útil para 2 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios

Descargar PDF

Página 1/12

IWH-1.5 Instantaneous Gas Water Heater

Installation and Operating Instructions

IWH-1.5 Instantaneous Gas Water Heater

Installation and Operating Instructions –Version 11.5

Part Numbers: 043993 (Black Door); 042793 (White Door)

The IWH-1.5 instantaneous water heater designed according the Australian Standards for is

installation in recreational vehicles. This water heater is not for use in space heating or

marine application.

WARNING: If the information in these instructions is not followed exactly,

a re or explosion may result causing property damage, personal injury or loss of life.

Do not store or use gasoline or other flammable vapors and liquids in the vicinity of this

or any other appliance.

WHAT TO DO IF YOU SMELL GAS



 Evacuate all persons from the caravan or RV.



 Shut o the gas supply at the gas container or source.



 Do not touch any electrical switch, or use any phone or radio in the vehicle.



 Do not start the vehicle’s engine or electric generator.



 Contact the nearest gas supplier or qualied service technician for repairs.



 If you cannot reach a gas supplier or qualied service technician, contact the

nearest re station or emergency services.



 Do not turn on the gas supply until the gas leak(s) has been repaired.

Installation and service must be performed by a qualied installer, service agency, OEM

or the gas supplier.

To avoid scalding, water supplied to the shower and hand basin should pass

through a tempering valve to restrict the water temperature to 50 degrees C.

We recommend the John Guest tempering valve 12mm code 042586. –

WARNING: Installation of this product must comply with the requirements of

AS/NZS 3500.4

WARNING: Do not block any pressure relief valves if tted when installing

this Hot Water System.

Critical Installation Warnings

● The pressure test screw must be properly tightened and the unit leak tested, prior to

starting or commissioning the unit.

● Install in recreation vehicles only. RV’s are recreation vehicles designed as temporary

living quarters for recreation, camping, or travel use having their own power or towed by

another vehicle.

● All combustion air must be supplied from outside the RV, and all products of combustion

must be vented to outside the RV.

● DO NOT vent water heater with venting system serving another appliance.

● DO NOT vent water heater to an outside enclosed porch area.

● Protect building materials from ue gas exhaust.

● Install water heater on an exterior wall, with access door opening to outdoors.

● DO NOT modify water heater in any way.

● DO NOT alter water heater for a positive grounding system.

● DO NOT HI-POT water heater unless electronic ignition system (circuit board) has been

disconnected.

● DO NOT use battery charger to supply power to water heater even when testing.

Do not install close to opening door or under room slide-out where the vent or inlet louvers

can be obstructed.

● This appliance shall be installed by authorised persons only and in accordance with these

installation instructions, AS5601.2, local gas tting regulations, municipal building codes,

electrical wiring regulations, local water supply regulations and any other statutory

regulations.

● Remove every packaging and transit protection in- and outside of the water heater

● This appliance shall be installed by authorised persons only and in accordance with these

installation instructions, AS5601.2, local gas tting regulations, municipal building codes,

electrical wiring regulations, local water supply regulations and any other statutory

regulations.

Installation Instructions for the IWH-1.5 Water Heater

The IWH-1.5 water heater is designed to be installable and removable from the exterior of

the vehicle. The mounting instructions are for the PrecisionTemp surface mount door. No

other door should be used. Doing so will void the warranty and cause the heater to

malfunction and could cause damage or injury.

Please read these instructions before making any modications to the construction of your

caravan or RV.

Selecting Installation Location

Review the following guidelines carefully before choosing the location for the water heater

and ensure the location complies with the requirements of the current edition of AS5601.2

before installation. The water heater must not be installed in an area where the vent can be

covered when any door or access panel on the coach is opened. The water heater should be

located in an area where leakage will not result in damage to other items of, or in the

structure. If such an area cannot be avoided, it is recommended that a suitable pan and drain

be installed under the heater.

Install the heater as close to the gas supply as practical to minimize length of the gas line.

There must be a minimum of 250 mm of clearance between the vent cover and any other

surface. Do not install the unit where the vent is within 0 mm any window or opening 40 of

into the caravan or recreational vehicle (RV). Do not block or restrict the door louvers, this

will damage the IWH-1.5.

Especificaciones del producto

Marca:	Camec
Categoría:	No categorizado
Modelo:	IWH-1.5
Color del producto:	Aluminium, White
Peso.:	58.2 g
Ancho:	43.75 mm
Profundidad:	18.6 mm
Altura:	90.6 mm
Longitud del cable:	0.145 m
Peso del embalaje:	104.5 g
Ancho del embalaje:	145 mm
Empaquetadura en profundidad:	95 mm
Altura del embalaje:	25 mm
Material de la carcasa:	Aluminium
Indicadores LED:	Activity, Link
Tecnología de conectividad:	Bedraad
red LAN:	Ja
País de origen:	Taiwan
Número de puertos Ethernet LAN (RJ-45):	1
Número de conexiones USB:	3
versión USB:	3.2 Gen 1 (3.1 Gen 1)
Interfaz:	Ethernet
Conecta y reproduce:	Ja
LAN Ethernet, velocidades de transferencia de datos:	10,100,1000 Mbit/s
Tecnología de cableado:	10/100/1000BaseT(X)
Estándar de red:	IEEE 802.1Q, IEEE 802.3, IEEE 802.3ab, IEEE 802.3az, IEEE 802.3u, IEEE 802.3x
Interno:	Nee
Sistemas operativos compatibles:	Compatible with Windows®/Mac®/Linux®/Chrome OS™
Protocolos de red compatibles:	IPv4, IPv6, TCP, UDP, TCP
Soporta el sistema operativo Mac:	Mac OS X 10.10 Yosemite, Mac OS X 10.11 El Capitan, Mac OS X 10.6 Snow Leopard, Mac OS X 10.7 Lion, Mac OS X 10.8 Mountain Lion, Mac OS X 10.9 Mavericks
El consumo de energía:	450 mA
Compatible con Linux:	Ja
Abarcando:	5 V
Guía de Instalación Rápida:	Ja
Tipo de interfaz Ethernet:	Gigabit Ethernet
Contenido:	1 x JCH471 USB-C™ Gigabit Ethernet & Hub Multi Adapter, 1 x Quick Installation Guide
Interfaz de host:	USB Type-C
Contenidos del paquete:	1 x JCH471 USB-C™ Gigabit Ethernet & HUB Multi Adapter, 1 x Quick Installation Guide, 1 x Driver CD
Otros sistemas de apoyo:	ChromeOS
Velocidad máxima de transferencia de datos:	5000 Mbit/s
Número de clasificación de control de exportaciones (ECCN):	EAR99
tipo de cable:	USB-C
Peso neto del embalaje de transporte:	570 g
Controladores suministrados:	Ja
Compatibilidad con tramas gigantes:	Ja
Duplex completo:	Ja
Componente para:	PC/Laptop
Altura del paquete principal (exterior):	180 mm
Ancho del embalaje principal (exterior):	225 mm
Peso bruto del embalaje principal (exterior):	2780 g
Longitud del paquete principal (exterior):	321 mm
Cantidad por caja principal (exterior):	20 stuk(s)
Peso del embalaje de envío (interior):	570 g
Ratio de transferencia:	5 Gbit/s
Consumo de energía (típico):	2.25 W
Baterias-incluidas:	Nee
Altura del paquete de envío (interior):	160 mm
Ancho del paquete de envío (interior):	105 mm
Longitud del paquete de envío (interior):	150 mm
Número GTIN (EAN/UPC) (exterior) embalaje principal:	24712795080791
Productos por embalaje de envío (interior):	5 stuk(s)
Sistema de seguimiento automatizado de clasificación de productos básicos (CCATS):	8471.80.0000
Cantidad mínima de pedido:	60 stuk(s)
Conexión de cable:	USB
etiquetado VLAN:	Ja
Período de garantía:	2 jaar