Casio 3297 Manual de Usario
Lee a continuación 📖 el manual en español para Casio 3297 (5 páginas) en la categoría Mirar. Esta guía fue útil para 7 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios
Página 1/5
Operation Guide 3297
E-9
When DST is turned on, the UTC offset setting range is –11.0 to +15.0, in x
0.5-hour units.
For information about Flash Alert, see “Flash Alert” (page E-32). x
Press 4. to exit the setting screen.A
The day of the week is displayed automatically in accordance with the date (year, x
month, and day) settings.
Daylight Saving Time (DST)
Daylight Saving Time (summer time) advances the time setting by one hour from
Standard Time. Remember that not all countries or even local areas use Daylight
Saving Time.
E-8
When the setting you want to change is fl ashing, use 3. and to change it as D B
described below.
Screen To do this: Do this:
Reset the seconds to
Press .D
Toggle between Daylight Saving Time
( ) and Standard Time ( )
Specify the UTC offset
Use (+) and (–).D B
Change the hour or minutes
Change the year
Change the month or day
For details about the UTC offset, see the “City Code Table” at the back of this x
manual.
See “Daylight Saving Time (DST)” on page E-9 for details about DST setting. x
The UTC offset setting range is –12.0 to +14.0, in 0.5-hour units. x
E-7
To set the time and date
In the Timekeeping Mode, hold down 1. until the A
seconds start to fl ash, which indicates the setting
screen.
Press 2. to move the fl ashing in the sequence shown C
below to select other settings.
Seconds DST UTC Offset
YearDayFlash Alert
C C
C C
C
Hour
Minutes
C
C
C
Month
C
Seconds
E-6
Timekeeping
Use the Timekeeping Mode to set and view the current
time and date.
Read This Before You Set the Time and Date !
The times displayed in the Timekeeping Mode and World
Time Mode are linked. Because of this, make sure you
select the UTC offset before you set the time and date.
Month – Day
PM indicator
Hour : Minutes Seconds
Day of week
E-5
C C
C
Stopwatch Mode Countdown Timer
Mode
Alarm Mode
E-4
General Guide
Press xC to change from mode to mode.
In any mode, press xL to illuminate the display.
C
Timekeeping Mode World Time Mode
C
E-3
To test the alarm .................................................................................................... E-27
To turn an alarm on and off .................................................................................. E-28
To turn the Hourly Time Signal on and off .......................................................... E-29
To illuminate the display ....................................................................................... E-30
To specify the illumination duration .................................................................... E-30
To turn Flash Alert on and off .............................................................................. E-32
To turn the button operation tone on and off ..................................................... E-33
E-2
Procedure Lookup
The following is a handy reference list of all the operational procedures contained in
this manual.
To set the time and date ......................................................................................... E-7
To toggle the Timekeeping Mode time between DST and Standard Time ....... E-10
To toggle between 12-hour and 24-hour timekeeping ....................................... E-11
To view the time for another city code ................................................................ E-12
To toggle a city code time
between Standard Time and Daylight Saving Time ........................................ E-13
To measure times with the stopwatch ................................................................. E-15
To use Auto-Start .................................................................................................. E-16
To confi gure the countdown timer ...................................................................... E-20
To use the countdown timer ................................................................................. E-22
To set an alarm time .............................................................................................. E-25
E-1
Contents
General Guide .......................................................................................................... E-4
Timekeeping .............................................................................................................E-6
World Time .............................................................................................................E-12
Stopwatch .............................................................................................................. E-14
Countdown Timer ..................................................................................................E-17
Alarms ....................................................................................................................E-23
Illumination ............................................................................................................ E-30
Reference ............................................................................................................... E-31
Specifi cations ........................................................................................................ E-37
E
About This Manual
Depending on the model of your watch, display text appears x
either as dark fi gures on a light background or light fi gures
on a dark background. All sample displays in this manual
are shown using dark fi gures on a light background.
Button operations are indicated using the letters shown in x
the illustration.
Each section of this manual provides you with the x
information you need to perform operations in each mode.
Further details and technical information can be found in the
“Reference” section.
MA1204-EA
Ú
#!3)/#/-054%2#/,4$
Operation Guide 3297
E-19
Countdown End Beeper
The countdown end beeper lets you know when the countdown reaches zero.
When the progress beeper is turned off, the countdown end beeper sounds for x
about 10 seconds, or until you press any button to stop it.
When the progress beeper is turned on, the countdown end beeper sounds for x
about one second.
Progress Beeper
When the progress beeper is turned on, the watch uses beeps to signal countdown
progress as described below.
Starting from fi ve minutes before the end of the countdown, the watch emits four x
short beeps at the top of each countdown minute.
30 seconds before the end of the countdown, the watch emits four short beeps. x
The watch emits a short beep for each of the last 10 seconds of the countdown. x
If the countdown start time is six minutes or greater, the watch emits a short beep x
for each second of the fi nal 10 seconds before the fi ve-minute point is reached. Four
short beeps are emitted to signal when the fi ve-minute point is reached.
E-18
Auto-repeat
When auto-repeat is turned on, the countdown restarts automatically from the
countdown start time when it reaches zero.
When auto-repeat is turned off, the countdown stops when it reaches zero and the
display shows the original countdown start time.
Pressing xD while an auto-repeat countdown is in progress pauses the current
countdown. You can resume the auto-repeat countdown by pressing , or you can D
press to reset to the countdown time starting value.B
Countdown Timer Beeper Operations
The watch beeps at various times during a countdown so you can keep informed
about the countdown status without looking at the display. The following describes the
types of beeper operations the watch performs during a countdown.
E-17
Countdown Timer
The countdown timer can be set within a range of one
minute to 24 hours. An alarm sounds when the countdown
reaches zero. The countdown timer also has an auto-
repeat feature and a progress beeper that signals the
progress of the countdown.
All of the operations in this section are performed in the x
Countdown Timer Mode, which you enter by pressing C
(page E-5).
Confi guring the Countdown Timer
The following are the settings you should confi gure before
actually using the countdown timer.
Countdown start time; Auto-repeat on/off; Progress beeper
on/off
See “To confi gure the countdown timer” (page E-20) for x
information about setting up the timer.
Hours
Minutes
Seconds
E-16
About Auto-Start
With Auto-Start, the watch performs a 5-second countdown, and stopwatch operation
starts automatically when the countdown reaches zero.
During the fi nal three seconds of the countdown, a beeper sounds with each second.
To use Auto-Start
While the stopwatch screen is showing all zeros in the 1.
Stopwatch Mode, press .B
This displays a 5-second countdown screen. x
To return to the all zeros screen, press xB again.
Press 2. to start the countdown.D
When the countdown reaches zero, a tone sounds and a x
stopwatch timing operation starts automatically.
Pressing xD while the Auto-Start countdown is in
progress starts the stopwatch immediately.
E-15
To measure times with the stopwatch
Elapsed time
DDDDB
Start Stop Re-start Stop Clear
Split time
DBBDB
Start Split
( displayed)SPL
Split release Stop Clear
Two Finishes
DBDBB
Start Split
First runner
fi nishes.
Display time of
fi rst runner.
Stop
Second runner
fi nishes.
Split release
Display time of
second runner.
Clear
E-14
Stopwatch
The stopwatch lets you measure elapsed time, split times,
and two fi nishes. It also includes Auto-Start.
The display range of the stopwatch is 23 hours, x
59 minutes, 59.99 seconds.
The stopwatch continues to run, restarting from zero after x
it reaches its limit, until you stop it.
The stopwatch measurement operation continues even if x
you exit the Stopwatch Mode.
Exiting the Stopwatch Mode while a split time is frozen x
on the display clears the split time and returns to elapsed
time measurement.
All of the operations in this section are performed in the x
Stopwatch Mode, which you enter by pressing (page C
E-5).
1/100 second
Hours
Minutes
Seconds
E-13
To toggle a city code time between Standard Time and Daylight Saving Time
In the World Time Mode, use 1. and to display the D B
city code (time zone) whose Standard Time/Daylight
Saving Time setting you want to change.
Hold down 2. for about one second to toggle Daylight A
Saving Time (DST indicator displayed) and Standard
Time (DST indicator not displayed).
The DST indicator is on the display whenever you display x
a city code for which Daylight Saving Time is turned on.
Note that the DST/Standard Time setting affects only x
the currently displayed city code. Other city codes are
not affected.
DST indicator
E-12
World Time
World Time shows the current time in 48 cities (29 time
zones) around the world.
All of the operations in this section are performed in x
the World Time Mode, which you enter by pressing C
(page E-4).
To view the time for another city code
In the World Time Mode, press to scroll eastwardly D
through city codes or to scroll westwardly.B
For full information about city codes, see the “City Code x
Table” at the back of this manual.
If the current time for a city is wrong, check your x
Timekeeping Mode time and the UTC offset settings and
make necessary changes.
City code
Current time and date in
the zone of the selected
city code
E-11
To toggle between 12-hour and 24-hour timekeeping
In the Timekeeping Mode, press to toggle between 12-hour timekeeping and D
24-hour timekeeping.
With the 12-hour format, the xP (PM) indicator appears to the left of the hour digits for
times in the range of noon to 11:59 p.m. and no indicator appears to the left of the
hour digits for times in the range of midnight to 11:59 a.m.
With the 24-hour format, times are displayed in the range of 0:00 to 23:59, without x
any indicator.
The 12-hour/24-hour timekeeping format you select in the Timekeeping Mode is x
applied in all other modes.
E-10
To toggle the Timekeeping Mode time between DST and Standard Time
In the Timekeeping Mode, hold down 1. until the A
seconds start to fl ash, which indicates the setting
screen.
Press 2. to display the DST setting screen.C
Press 3. to toggle between Daylight Saving Time (D
displayed) and Standard Time ( displayed).
Press 4. to exit the setting screen.A
The DST indicator appears on the display to indicate that x
Daylight Saving Time is turned on.
DST indicator
Operation Guide 3297
E-29
To turn the Hourly Time Signal on and off
In the Alarm Mode, use 1. to select the Hourly Time D
Signal (SIG).
Press 2. to toggle it on and off.A
The Hourly Time Signal on indicator is shown on the x
display in all modes while this function is turned on.
Hourly Time Signal on
indicator
E-28
To turn an alarm on and off
In the Alarm Mode, use 1. and to select an alarm.D B
Press 2. to toggle it on and off.A
Turning on an alarm ( xAL1 AL2 SNZ, , or ) displays the
alarm on indicator on its Alarm Mode screen.
Turning on the snooze alarm ( xSNZ) displays the alarm
on indicator and snooze alarm indicator on the Alarm
Mode snooze alarm screen.
In all modes, the alarm on indicator is shown for any x
alarm that is currently turned on.
The alarm on indicator fl ashes while the alarm is x
sounding.
The snooze alarm indicator fl ashes while the snooze x
alarm is sounding and during the 5-minute intervals
between alarms.
Snooze alarm
indicator
Alarm on indicator
E-27
Alarm Operation
The alarm tone sounds at the preset time for 10 seconds, regardless of the mode the
watch is in. In the case of the snooze alarm, the alarm operation is performed a total
of seven times, every fi ve minutes, until you turn the alarm off (page E-28).
Alarm and Hourly Time Signal operations are performed in accordance with the x
Timekeeping Mode time.
To stop the alarm tone after it starts to sound, press any button. x
Performing any one of the following operations during a 5-minute interval between x
snooze alarms cancels the current snooze alarm operation.
Displaying the Timekeeping Mode setting screen (page E-7)
Displaying the SNZ setting screen (page E-25)
To test the alarm
In the Alarm Mode, hold down to sound the alarm.D
E-26
Press 3. to move the fl ashing in the sequence shown below to select other C
settings.
C C C
Hour Minutes Month Day
C
While a setting is fl ashing, use 4. and to change it as described below.D B
Screen To do this: Do this:
Change the hour and
minutes
Use (+) and (–).D B
With the 12-hour format, set the time correctly x
as a.m. or p.m. ( indicator).P
To set an alarm that does not include a month x
and/or day, set for each setting.
Change the month and day
Press 5. to exit the setting screen.A
E-25
To set an alarm time
In the Alarm Mode, use 1. and to scroll through the D B
alarm screens until the one whose time you want to set
is displayed.
D
B
B
BD B D
D
To set a one-time alarm, display an alarm screen xAL1or . To set the AL2
snooze alarm, display the SNZ screen.
The snooze alarm repeats every fi ve minutes. x
After you select an alarm, hold down 2. until the hour setting of the alarm time A
starts to fl ash, which indicates the setting screen.
This operation turns on the alarm automatically. x
E-24
Alarm Types
The alarm type is determined by the settings you make, as described below.
Daily alarm x
Set the hour and minutes for the alarm time. This type of setting causes the alarm to
sound everyday at the time you set.
Date alarm x
Set the month, day, hour and minutes for the alarm time. This type of setting causes
the alarm to sound at the specifi c time, on the specifi c date you set.
1-Month alarm x
Set the month, hour and minutes for the alarm time. This type of setting causes the
alarm to sound everyday at the time you set, only during the month you set.
Monthly alarm x
Set the day, hour and minutes for the alarm time. This type of setting causes the
alarm to sound every month at the time you set, on the day you set.
E-23
Alarms
You can set up to three independent multi-function
alarms with hour, minutes, month, and day. When an
alarm is turned on, the alarm tone sounds when the
alarm time is reached. One of the alarms is a snooze
alarm, while the other two are one-time alarms.
You can also turn on an Hourly Time Signal that causes
the watch to beep twice every hour on the hour.
There are three alarm screens numbered xAL1 and
AL2 for the one-time alarm, a snooze alarm screen
indicated by SNZ. The Hourly Time Signal screen is
indicated by SIG.
All of the operations in this section are performed in x
the Alarm Mode, which you enter by pressing (page C
E-5).
Alarm number
Alarm date
(Month – Day)
Alarm time
(Hour : Minutes)
E-22
To use the countdown timer
Press while in the Countdown Timer Mode to start the D
countdown timer.
The countdown timer operation continues even if you exit x
the Countdown Timer Mode.
Press xD while a countdown operation is in progress to
pause it. Press again to resume the countdown.D
To stop a countdown operation completely, fi rst pause x
it (by pressing ), and then press . This returns the D B
countdown time to its starting value.
E-21
When the setting you want to change is fl ashing, use 3. and to change it as D B
described below.
Setting Screen Button Operation
Hours, Minutes Use (+) and (–) to change the setting.D B
Auto-repeat Press to toggle auto-repeat on ( displayed) D
and off ( displayed).
Progress Beeper Press to toggle the progress beeper on ( ) and D
off ( ).
To specify a countdown start time of 24 hours, set x.
Press 4. to exit the setting screen.A
You can also perform steps 1 and 2 of the above procedure whenever you need to x
view the current auto-repeat and progress beeper settings.
E-20
To confi gure the countdown timer
While the countdown start time is on the display in the 1.
Countdown Timer Mode, hold down until the current A
countdown start time starts to fl ash, which indicates the
setting screen.
If the countdown start time is not displayed, use the x
procedure under “To use the countdown timer” (page
E-22) to display it.
Press 2. to move the fl ashing in the sequence shown C
below to select other settings.
Hours Minutes
Auto-repeatProgress Beeper
C
C
C C
Especificaciones del producto
| Marca: | Casio |
| Categoría: | Mirar |
| Modelo: | 3297 |
¿Necesitas ayuda?
Si necesitas ayuda con Casio 3297 haz una pregunta a continuación y otros usuarios te responderán
Mirar Casio Manuales
24 Octubre 2024
24 Octubre 2024
24 Octubre 2024
24 Octubre 2024
24 Octubre 2024
24 Octubre 2024
24 Octubre 2024
24 Octubre 2024
24 Octubre 2024
24 Octubre 2024
Mirar Manuales
- Mirar Braun
- Mirar Epson
- Mirar Garmin
- Mirar Medion
- Mirar Ade
- Mirar Adidas
- Mirar Alpina
- Mirar Armani
- Mirar Ascot
- Mirar Invicta
- Mirar Skmei
- Mirar Suunto
- Mirar Alessi
- Mirar Omega
- Mirar Pyle
- Mirar Crivit
- Mirar Timex
- Mirar Lotus
- Mirar Renkforce
- Mirar Victorinox
- Mirar Lambretta
- Mirar Holzkern
- Mirar Edox
- Mirar So & Co
- Mirar Diesel
- Mirar Tissot
- Mirar Karlsson
- Mirar Bulova
- Mirar Lorus
- Mirar Stuhrling
- Mirar Beper
- Mirar Citizen
- Mirar Luminox
- Mirar Festina
- Mirar Emporio Armani
- Mirar Velleman
- Mirar Detomaso
- Mirar La Crosse Technology
- Mirar Skagen
- Mirar Marquant
- Mirar Dugena
- Mirar Rolex
- Mirar Seiko
- Mirar Auriol
- Mirar TW Steel
- Mirar Breitling
- Mirar Timberland
- Mirar Spinnaker
- Mirar Jaguar
- Mirar Pulsar
- Mirar Pilgrim
- Mirar Davis
- Mirar Boss
- Mirar Irox
- Mirar Michael Kors
- Mirar Zenith
- Mirar Danish Design
- Mirar Daniel Steiger
- Mirar Torgoen
- Mirar Executive
- Mirar Tommy Hilfiger
- Mirar Nautica
- Mirar Obaku
- Mirar Hugo Boss
- Mirar Fossil
- Mirar Spin Master
- Mirar Krontaler
- Mirar Brera
- Mirar Cover
- Mirar Lucien Picard
- Mirar Mondaine
- Mirar Geemarc
- Mirar Slazenger
- Mirar Bering
- Mirar DMC
- Mirar Maurice Lacroix
- Mirar ICE Watch
- Mirar La Crosse
- Mirar Rado
- Mirar Puma
- Mirar Tauchmeister
- Mirar Just
- Mirar Sempre
- Mirar IWC
- Mirar Digi-tech
- Mirar Oregon Scientific
- Mirar Breo
- Mirar BML
- Mirar Inter-Quartz
- Mirar Hamilton
- Mirar Longines
- Mirar Junghans
- Mirar Naitica
- Mirar Kogan
- Mirar Guess
- Mirar ESQ
- Mirar Audemars Piguet
- Mirar Julie Julsen
- Mirar Xonix
- Mirar KRAEK
- Mirar World Timer Chronograph
- Mirar Ferrari
- Mirar Bruno Sohnle
- Mirar Movado
- Mirar QQ
- Mirar Fila
- Mirar Ronda
- Mirar PANERAI
- Mirar Prologue
- Mirar Zeppelin
- Mirar Hype
- Mirar HYT
- Mirar Fromanteel
- Mirar Grand Seiko
Últimos Mirar Manuales
27 Octubre 2024
27 Octubre 2024
26 Octubre 2024
26 Octubre 2024
24 Octubre 2024
24 Octubre 2024
24 Octubre 2024
22 Octubre 2024
21 Octubre 2024
21 Octubre 2024