Casio Edifice EQW-M1100DB-1AER Manual de Usario
Lee a continuación 📖 el manual en español para Casio Edifice EQW-M1100DB-1AER (8 páginas) en la categoría Mirar. Esta guía fue útil para 9 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios
Página 1/8
Operation Guide 5423
E-9
Charging the Watch
The face of the watch is a solar panel that generates power from light. The generated
power charges a built-in rechargeable battery, which powers watch operations. The
watch charges whenever it is exposed to light.
Charging Guide
Whenever you are not
wearing the watch, be sure
to leave it in a location
where it is exposed to light.
x Best charging
performance is achieved
by exposing the watch to
light that is as strong as
possible.
When wearing the watch,
makes sure that its face is
not blocked from light by the
sleeve of your clothing.
x The watch may enter a
sleep state (page E-14) if its
face is blocked by your
sleeve even only partially.
E-8
To swap your Home City and World Time City ................................................ E-50
Auto Correction of Hand Home Positions ......................................................... E-52
To trigger auto correction of hand home positions ........................................... E-53
Adjusting Home Positions Manually.................................................................. E-55
To adjust home positions manually .................................................................. E-56
Troubleshooting .................................................................................................. E-60
Specifi cations ...................................................................................................... E-69
E-7
Timekeeping ......................................................................................................... E-31
Confi guring Home City Settings ........................................................................E-32
To confi gure Home City settings ...................................................................... E-32
To toggle the Home City time between standard time and
daylight saving time ...................................................................................... E-34
Confi guring Current Time and Date Settings Manually ...................................E-36
To change the current time setting manually ................................................... E-36
To change the current date setting manually ................................................... E-39
Using the Stopwatch ........................................................................................... E-43
To perform elapsed time measurement ........................................................... E-44
To perform an elapsed time operation ............................................................. E-44
To pause at a split time .................................................................................... E-44
Checking the Current Time in a Different Time Zone ....................................... E-46
To view the time in another time zone ............................................................. E-47
To specify standard time or daylight saving time (DST) for a city .................... E-48
E-6
Contents
About This Manual................................................................................................. E-2
Things to check before using the watch .............................................................E-3
Charging the Watch ............................................................................................... E-9
To recover from the sleep state ....................................................................... E-15
Radio Controlled Atomic Timekeeping..............................................................E-16
To get ready for a receive operation ................................................................ E-21
To perform manual receive .............................................................................. E-24
To check the result of the latest receive operation ........................................... E-26
Mode Reference Guide ........................................................................................ E-28
To determine the watch’s current mode ........................................................... E-29
To return to the Timekeeping Mode from any other mode ............................... E-29
To select a mode.............................................................................................. E-30
E-5
The watch is now ready for use.
x For details about the watch’s radio controlled timekeeping feature, see “Radio
Controlled Atomic Timekeeping” (page E-16).
E-4
2. Check the Home City and the daylight saving time (DST) setting.
Use the procedure under “To confi gure Home City settings” (page E-32) to confi gure your
Home City and daylight saving time settings.
Important!
Proper time calibration signal reception and World Time settings depend on correct
Home City, time, and date settings in the Timekeeping Mode. Make sure you
confi gure these settings correctly.
3. Set the current time.
x To set the time using a time calibration signal
See “To get ready for a receive operation” (page E-21).
x To set the time manually
See “Confi guring Current Time and Date Settings Manually” (page E-36).
E-3
Things to check before using the watch
1. Hold down for about two seconds to enter the Timekeeping Mode, and C
then observe the movement of the
x
x
x
xx
.Second Hand
Is the
x
x
x
xx
moving smoothly in one-second intervals?Second Hand
Is the
x
x
x
xx
moving at Second Hand
two-second intervals or is it stopped
completely?
Go to step 2.
The watch is charged suffi ciently.
For details about charging, see
“Charging the Watch” (page E-9).
Power is low. Charge the watch by placing
it in a location where it is exposed to light.
For details, see “Charging the Watch”
(page E-9).
NO
YES
YES
NEXT
E-2
About This Manual
Button operations are indicated using the letters A
through shown in the illustration.D
Hand Functions
z
z
z
z z
Hour Hand
x
x
x
x x
Second Hand
c
c
c
c c
Minute Hand
v
v
v
v v
24-hour Hand: Indicates the current 24-hour
timekeeping hour.
b
b
b
b b
Left Dial Hands: Indicate a time, in 24-hour format,
depending on the current mode.
n
n
n
n n
Right Dial Hand: Indicates the current day of the week
and current mode.
m
m
m
m m
Day Indicator
This User’s Guide uses numbers shown above to identify watch hands and indicators.
30
z c
b nv m
x
E-1
ENGLISH
Congratulations upon your selection of this CASIO watch.
This watch does not have a city code that corresponds to the UTC offset of –3.5
hours. Because of this, the radio-controlled atomic timekeeping function will not
display the correct time for Newfoundland, Canada.
Note that CASIO COMPUTER CO., LTD. assumes no responsibility for any damage
or loss suffered by you or any third party arising through the use of your watch or its
malfunction.
MA1404-EA © 2014 CASIO COMPUTER CO., LTD.
Operation Guide 5423
E-19
Japanese Signals Chinese Signal
Fukushima
500 kilometers
Fukuoka/Saga
1,000 kilometers
1,500 kilometers
Changchun500 kilometers
Beijing
Shangqiu
Shanghai
Chengdu
Hong Kong
E-18
Approximate Reception Ranges
UK and German Signals North American Signal
Anthorn
500 kilometers
1,500 kilometers
Mainfl ingen
The Anthorn signal is receivable
within this area.
2,000 miles
(3,000 kilometers)
600 miles
(1,000 kilometers)
Fort Collins
E-17
If your Home City Code setting is this: The watch can receive the signal from
the transmitter located here:
LONDON (LON), PARIS (PAR), ATHENS (ATH) Anthorn (England), Mainfl ingen (Germany)
HONG KONG (HKG) Shangqiu City (China)
TOKYO (TYO) Fukushima (Japan), Fukuoka/Saga (Japan)
HONOLULU (HNL), ANCHORAGE (ANC),
LOS ANGELES (LAX), DENVER (DEN),
CHICAGO (CHI), NEW YORK (NYC)
Fort Collins, Colorado (United States)
Important!
x The areas covered by ( ) and ( ) are quite far HONOLULU HNL ANCHORAGE ANC
from the calibration signal transmitters, so certain conditions may cause reception
problems.
x When ( ) or ( ) is selected as the Home City, HONOLULU HNL HONG KONG HKG
only the time and date are adjusted according to the time calibration signal. You
need to switch manually between standard time and daylight saving time (DST) if
required. See “To toggle the Home City time between standard time and daylight
saving time” (page E-34) for information about how to do this.
E-16
Radio Controlled Atomic Timekeeping
This watch receives a time calibration signal and updates its time setting accordingly.
However, when using the watch outside of areas covered by time calibration signals,
you will have to adjust the settings manually as required. See “Confi guring Current
Time and Date Settings Manually” (page E-36) for more information.
This section explains how the watch updates its time settings when the city code
selected as the Home City is in Japan, North America, Europe, or China, and is one
that supports time calibration signal reception.
E-15
To recover from the sleep state
Move the watch to a well-lit area or press any button.
E-14
Power Saving
Power Saving enters a sleep state automatically whenever the watch is left for a
certain period in an area where it is dark. The table below shows how watch functions
are affected by Power Saving.
x There actually are two sleep state levels: “second hand sleep” and “function sleep”.
Elapsed Time in Dark Operation
60 to 70 minutes (second hand
sleep)
x
x
x
x
x
only stopped at 12 o’clock, all other Second Hand
functions enabled
6 or 7 days (function sleep) x All functions, including analog timekeeping, disabled
x Internal timekeeping maintained
x The watch will not enter a sleep state between 6:00 a.m. and 9:59 p.m. If the watch
is already in a sleep state when 6:00 a.m. arrives, however, it will remain in the
sleep state.
x The watch will not enter a sleep state while it is in the Stopwatch Mode.
E-13
Charging Times
Exposure Level (Brightness)
Daily
Operation
*1
Level Change *2
Level 3 Level 2 Level 1
Outdoor sunlight (50,000 lux) 8 minutes 2 hours 24 hours
Window sunlight (10,000 lux) 30 minutes 6 hours 89 hours
Window sunlight on cloudy day
(5,000 lux) 48 minutes 9 hours 144 hours
Indoor fl uorescent lighting (500 lux) 8 hours 97 hours – – –
* 1 Approximate exposure each day to generate power for normal daily operation.
* 2 Approximate amount exposure time required to take power up one level.
x The above exposure times all are for reference only. Actual exposure times depend
on lighting conditions.
x For details about the operating time and daily operating conditions, see the “Power
Supply” section of the Specifi cations (page E-70).
E-12
Level Hand Movement Function Status
1 Normal. All functions enabled.
2
x
x
x
x
x
moving at two-second Second Hand
intervals.
m
m
m
m
m
changes to (home Day Indicator 1
position).
Time calibration signal reception.
3
x
x
x
x
x
stopped.Second Hand
z
z
z
z
z
and Hour Hand c
c
c
c
c
stopped Minute Hand
at 12 o’clock.
All functions disabled.
x When power drops to Level 3, all functions will be disabled but the watch will
continue to keep time internally for about one week. If you recharge the battery
suffi ciently during this period, the analog hands will move automatically to the
correct setting and regular timekeeping will resume. After one week, all settings
(including timekeeping) will be cleared. Recharging the battery will reset all settings
to their initial factory defaults.
E-11
Power Levels
You can get an idea of the watch’s power level by
observing the movement of the
x
x
x
xx
in the Second Hand
Timekeeping Mode.
x If the
x
x
x
xx
is moving normally in one-Second Hand
second intervals, power is at Level 1.
x If the
x
x
x
xx
is moving at two-second Second Hand
intervals, power is at Level 2, which is quite low (Low
battery alert). Expose the watch to light as soon as
possible so it can charge.
Moves at two-second
intervals.
30
z c
xm
E-10
Warning!
Leaving the watch in bright light for charging can cause it to become quite hot.
Take care when handling the watch to avoid burn injury. The watch can become
particularly hot when exposed to the following conditions for long periods.
x On the dashboard of a car parked in direct sunlight
x Too close to an incandescent lamp
x Under direct sunlight
Important!
x Keep the watch in an area normally exposed to bright light when storing it for long
periods. This helps to ensure that power does not run down.
x Storing the watch for long periods in an area where there is no light or wearing it in
such a way that it is blocked from exposure to light can cause power to run down.
Make sure that the watch is exposed to bright light whenever possible.
Operation Guide 5423
E-29
Selecting a Mode
With this watch, everything starts from the Timekeeping Mode.
To determine the watch’s current mode
Check the position of the
n
n
n
nn
as shown Right Dial Hand
under “To select a mode” (page E-30).
To return to the Timekeeping Mode from any other
mode
Hold down at least two seconds to enter the C
Timekeeping Mode.
30
n
E-28
Mode Reference Guide
Your watch has three “modes”. The mode you should select depends on what you
want to do.
To do this: Enter this mode: See:
x View the current time in your Home City and in one
of 29 other cities around the globe
x View the current date in the Home City
x Confi gure Home City and daylight saving time
(DST) settings
x Perform a time calibration receive operation
x Confi gure time and date settings manually
Timekeeping Mode E-31
Use the stopwatch to measure elapsed time Stopwatch Mode E-43
View the current time in one of 29 cities (time zones)
around the globe World Time Mode E-46
E-27
Radio-controlled Atomic Timekeeping Precautions
x Strong electrostatic charge can result in the wrong time setting.
x Even if a receive operation is successful, certain conditions can cause the time
setting to be off by up to one second.
x The watch is designed to update the date and day of the week automatically for
the period January 1, 2000 to December 31, 2099. Updating of the date by signal
reception will no longer be performed starting from January 1, 2100.
x If you are in an area where signal reception is not possible, the watch keeps time
with the precision noted in “Specifi cations” (page E-69).
x The receive operation is disabled under any of the following conditions.
− While power is at Level 2 or lower (page E-11)
− When the watch is in the function sleep state (Power Saving, page E-14)
E-26
To check the result of the latest receive operation
In the Timekeeping Mode, press .A
x The
x
x
x
xx
will move to ( ) for fi ve Second Hand Y YES
seconds if the latest receive operation was successful,
or ( ) if it was not. After that, regular timekeeping N NO
will resume.
x You can return to the Timekeeping Mode manually by
pressing while the A
x
x
x
xx
is pointing to Second Hand
Y N NO (YES) or ( ).
Note
x The
x
x
x
xx
will indicate ( ) if you have Second Hand N NO
adjusted the time or date setting manually since the
latest receive operation.
30
x
E-25
3. The receive operation is complete when the
x
x
x
xx
Second
Hand moves to ( ) or ( ) for about fi ve Y YES N NO
seconds, and then resumes regular timekeeping.
x You can return to the Timekeeping Mode manually by
pressing while the A
x
x
x
xx
is pointing to Second Hand
Y N NO (YES) or ( ).
x When the receive operation is successful, the watch
adjusts the time setting accordingly. It does not adjust
the setting if the operation failed.
Note
x To interrupt a receive operation and return to the
Timekeeping Mode, press any button.
30
x
E-24
To perform manual receive
1. In the Timekeeping Mode, keep depressed (for about two seconds) as the A
x
x
x
xx
goes through the following sequence.Second Hand
x Moves to (or for some models) or ( ) to indicate the last signal Y YES N NO
reception result, then to ( ).R READY
2. The
x
x
x
xx
indicates the operations the watch is currently performing.Second Hand
When the x
x
x
x
x
Second
Hand is pointed here: It means this:
R (READY) Watch is setting up for reception.
W (WORK) Reception is in progress.
Y (YES) Reception was completed
successfully.
N (NO) Reception failed for some reason.
x If signal reception is unstable, the x
x
x
x
x
Second Hand
may move between ( ) and ( ).W WORK R READY
30
x
E-23
3. What you should do next depends on whether you are using Auto Receive or
Manual Receive.
x Auto Receive: Leave the watch over night in the location you selected in step 2.
See “Auto Receive” on page E-23 for details.
x Manual Receive: Perform the operation under “To perform manual receive” on
page E-24.
Auto Receive
x With Auto Receive, the watch performs the receive operation each day
automatically up to six times (up to fi ve times for the Chinese calibration signal)
between the hours of midnight and 5 a.m. (according to the Timekeeping Mode
time). When any receive operation is successful, none of the other receive
operations for that day are performed.
x When a calibration time is reached, the watch will perform the receive operation
only if it is in the Timekeeping Mode or World Time Mode. The receive operation is
not performed if a calibration time is reached while you are confi guring settings.
E-22
x The receive operation takes from two to seven minutes, but in some cases it
can take as long as 14 minutes. Take care that you do not perform any button
operation or move the watch during this time.
x Signal reception may be diffi cult or even impossible under the conditions
described below.
Inside or
among
buildings
Inside a
vehicle
Near
household
appliances,
offi ce
equipment,
or a mobile
phone
Near a
construction
site, airport,
or other
sources of
electrical
noise
Near
high-tension
power lines
Among
or behind
mountains
E-21
x Using this watch in a country covered by a time calibration that is different from the
countries it supports may result in incorrect time indication due to local application
of summer time, etc.
To get ready for a receive operation
1. Confi rm that the watch is in the Timekeeping Mode. If it isn’t, hold down for C
about two seconds to enter the Timekeeping Mode.
2. Place the watch in a location where signal reception is good.
x Position the watch as shown in the
nearby illustration, with 6 o’clock
pointed towards a window. Make
sure there are no metal objects
nearby.
x Signal reception normally is better
at night.
6 o’clock
or
E-20
x Signal reception may not be possible at the distances noted below during certain
times of the year or day. Radio interference may also cause problems with
reception.
− Mainfl ingen (Germany) or Anthorn (England) transmitters: 500 kilometers (310
miles)
− Fort Collins (United States) transmitter: 600 miles (1,000 kilometers)
− Fukushima or Fukuoka/Saga (Japan) transmitters: 500 kilometers (310 miles)
− Shangqiu (China) transmitter: 500 kilometers (310 miles)
x As of December 2013, China does not use Daylight Saving Time (DST). If China
does go to the Daylight Saving Time system in the future, some functions of this
watch may no longer operate correctly.
Especificaciones del producto
| Marca: | Casio |
| Categoría: | Mirar |
| Modelo: | Edifice EQW-M1100DB-1AER |
¿Necesitas ayuda?
Si necesitas ayuda con Casio Edifice EQW-M1100DB-1AER haz una pregunta a continuación y otros usuarios te responderán
Mirar Casio Manuales
24 Octubre 2024
24 Octubre 2024
24 Octubre 2024
24 Octubre 2024
24 Octubre 2024
24 Octubre 2024
24 Octubre 2024
24 Octubre 2024
24 Octubre 2024
24 Octubre 2024
Mirar Manuales
- Mirar Braun
- Mirar Epson
- Mirar Garmin
- Mirar Medion
- Mirar Ade
- Mirar Adidas
- Mirar Alpina
- Mirar Armani
- Mirar Ascot
- Mirar Invicta
- Mirar Skmei
- Mirar Suunto
- Mirar Alessi
- Mirar Omega
- Mirar Pyle
- Mirar Crivit
- Mirar Timex
- Mirar Lotus
- Mirar Renkforce
- Mirar Victorinox
- Mirar Lambretta
- Mirar Holzkern
- Mirar Edox
- Mirar So & Co
- Mirar Diesel
- Mirar Tissot
- Mirar Karlsson
- Mirar Bulova
- Mirar Lorus
- Mirar Stuhrling
- Mirar Beper
- Mirar Citizen
- Mirar Luminox
- Mirar Festina
- Mirar Emporio Armani
- Mirar Velleman
- Mirar Detomaso
- Mirar La Crosse Technology
- Mirar Skagen
- Mirar Marquant
- Mirar Dugena
- Mirar Rolex
- Mirar Seiko
- Mirar Auriol
- Mirar TW Steel
- Mirar Breitling
- Mirar Timberland
- Mirar Spinnaker
- Mirar Jaguar
- Mirar Pulsar
- Mirar Pilgrim
- Mirar Davis
- Mirar Boss
- Mirar Irox
- Mirar Michael Kors
- Mirar Zenith
- Mirar Danish Design
- Mirar Daniel Steiger
- Mirar Torgoen
- Mirar Executive
- Mirar Tommy Hilfiger
- Mirar Nautica
- Mirar Obaku
- Mirar Hugo Boss
- Mirar Fossil
- Mirar Spin Master
- Mirar Krontaler
- Mirar Brera
- Mirar Cover
- Mirar Lucien Picard
- Mirar Mondaine
- Mirar Geemarc
- Mirar Slazenger
- Mirar Bering
- Mirar DMC
- Mirar Maurice Lacroix
- Mirar ICE Watch
- Mirar La Crosse
- Mirar Rado
- Mirar Puma
- Mirar Tauchmeister
- Mirar Just
- Mirar Sempre
- Mirar IWC
- Mirar Digi-tech
- Mirar Oregon Scientific
- Mirar Breo
- Mirar BML
- Mirar Inter-Quartz
- Mirar Hamilton
- Mirar Longines
- Mirar Junghans
- Mirar Naitica
- Mirar Kogan
- Mirar Guess
- Mirar ESQ
- Mirar Audemars Piguet
- Mirar Julie Julsen
- Mirar Xonix
- Mirar KRAEK
- Mirar World Timer Chronograph
- Mirar Ferrari
- Mirar Bruno Sohnle
- Mirar Movado
- Mirar QQ
- Mirar Fila
- Mirar Ronda
- Mirar PANERAI
- Mirar Prologue
- Mirar Zeppelin
- Mirar Hype
- Mirar HYT
- Mirar Fromanteel
- Mirar Grand Seiko
Últimos Mirar Manuales
27 Octubre 2024
27 Octubre 2024
26 Octubre 2024
26 Octubre 2024
24 Octubre 2024
24 Octubre 2024
24 Octubre 2024
22 Octubre 2024
21 Octubre 2024
21 Octubre 2024