Casio EFR-526BK-1A2V Manual de Usario

Casio Mirar EFR-526BK-1A2V

Lee a continuación 📖 el manual en español para Casio EFR-526BK-1A2V (1 páginas) en la categoría Mirar. Esta guía fue útil para 10 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios

Página 1/1
1
Operation Guide 5345
MA1212-EA
Ú
#!3)/#/-054%2#/,4$
To change the day indicator setting
To adjust the time setting
Pull the out to Click 1. Crown
Push the back in. Crown
Push the back in. Crown
Rotate the to change the Crown
time setting.
When the second hand is at
12 o’clock, pull the Crown out to
Click 2.
Rotate the to set the day. Crown
Note
Take care that you set the correct AM
x
or PM time.
When changing the time, move the
x
minute hand four or fi ve minutes past
your fi nal setting, and then back it up
to the setting you want.
Note
The day indicator setting uses a 31-
x
day month. Make adjustments for
months of shorter lengths.
Avoid changing the day indicator
x
setting between the hours of 9
p.m. and 1 a.m. Otherwise, the day
indicator may not change correctly at
midnight.
Speci cations
Accuracy: ±20 seconds average per month
Stopwatch: Measuring Capacity: 59'59.9" (60 minutes)
Measuring Unit: 1/10 second
Measurements: Elapsed time; split time; two nishes
Battery: One silver oxide battery (Type: SR920SW)
Battery Life: Approximately 2 years (60 minutes stopwatch operation per day)
Stopwatch functions
Crown Operations
Some water-resistant models (100 meters, 200 meters)
have a screw-in crown. When you need to perform a crown
operation, rotate it towards you to unscrew it. Then pull
the crown out. Avoid applying undue force when pulling.
The watch loses its water resistance while the crown is
unscrewed. After performing a crown operation, fully screw
the crown back in.
Crown
Loosen
If your watch has a rotary bezel...
You can rotate the bezel to align its mark with the
minute hand. Then you will be able to tell how much
time has elapsed since aligning the mark.
Start
Elapsed time
Current
Your watch may differ somewhat from the one shown in the illustration. x
Some models may use a combination of hands and rotating disks to indicate x
information. The word “hand” in this section is used to mean both analog hands
and rotating disks.
Using the Stopwatch
Elapsed time
A A A A B
Start Stop Re-start Stop Reset
Split time
A B B A B
Start Split Split release Stop Reset
Two nishes
A B A B B
Start Split
First runner
nishes.
Display time of rst
runner.
Stop
Second runner
nishes.
Split release
Display time of
second runner.
Reset
Important!
Do not operate the stopwatch with the crown pulled out.
x
Note
An elapsed time operation will stop automatically at the end of 60 minutes.
x
The stopwatch measures elapsed time in 1/10-second increments up to 59 minutes,
59.9 seconds.
Perform the following procedure if the stopwatch hands do not return to their 0 (zero)
positions when you reset the stopwatch.
Correcting the 0 Positions of the Hands
Pull the out to Click 2. Crown
Press to move the A Stopwatch 1/10-Second Hand clockwise.
Holding down xA will move the hand at high speed.
Press to move the B Stopwatch Second Hand clockwise.
Holding down
xB will move the hand at high speed.
The x Stopwatch Minute Hand is synchronized with the Stopwatch Second Hand .
After all of the hands are the way you want, push the back in. Crown
Important!
Timekeeping stops while the crown is pulled out. Correct the current time setting
x
after performing the above operation.

Second Hand
Day Indicator
Click 2
Click 1
Hour Hand Minute Hand
A
B
Crown
Stopwatch Minute Hand
Stopwatch 1/10-Second Hand
Stopwatch Second Hand

Especificaciones del producto

Marca: Casio
Categoría: Mirar
Modelo: EFR-526BK-1A2V

¿Necesitas ayuda?

Si necesitas ayuda con Casio EFR-526BK-1A2V haz una pregunta a continuación y otros usuarios te responderán




Mirar Casio Manuales

Mirar Manuales

Últimos Mirar Manuales