Casio EFV-550D-1AVUEF Manual de Usario

Casio Mirar EFV-550D-1AVUEF

Lee a continuación 📖 el manual en español para Casio EFV-550D-1AVUEF (1 páginas) en la categoría Mirar. Esta guía fue útil para 7 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios

Descargar PDF

Página 1/1

Operation Guide ANA(H3H-1)

Stopwatch functions

Crown Operations

Some water-resistant models (100 meters, 200 meters)

have a screw-in crown. When you need to perform a crown

operation, rotate it towards you to unscrew it. Then pull

the crown out. Avoid applying undue force when pulling.

The watch loses its water resistance while the crown is

unscrewed. After performing a crown operation, fully screw

the crown back in.

Crown

Loosen

If your watch has a rotary bezel...

You can rotate the bezel to align its ▼ mark with the

minute hand. Then you will be able to tell how much

time has elapsed since aligning the ▼ mark.

Start

Elapsed time

Current

Be sure to keep all user documentation handy for future reference.

Your watch may differ somewhat from the one shown in the illustration.

Some models may use a combination of hands and rotating disks to indicate

information. The word “hand” in this section is used to mean both analog hands

and rotating disks.



Second Hand

Day Indicator

Click 2

Click 1

Hour Hand Minute Hand

Crown

Stopwatch Minute Hand

Stopwatch 1/10-Second Hand

Stopwatch Second Hand

To change the day indicator setting

To adjust the time setting

Pull the out to Click 1. Crown

Push the back in. Crown

Rotate the to change the Crown

time setting.

When the second hand is at

12 o’clock, pull the Crown out to

Click 2.

Rotate the away from you Crown

to set the day.

Note

x Take care that you set the correct AM

or PM time.

x When changing the time, move the

minute hand four or five minutes past

your final setting, and then back it up

to the setting you want.

Note

x The day indicator setting uses a 31-

day month. Make adjustments for

months of shorter lengths.

x Avoid changing the day indicator

setting between the hours of 9

p.m. and 1 a.m. Otherwise, the day

indicator may not change correctly at

midnight.

Push the back in on a time Crown

signal to resume timekeeping.

Specifications

Module No. Accuracy at normal

temperature (per month) Battery type

Battery life

(60 minutes stopwatch

operation per day)

5517/5521 ±20 seconds SR920SW Approx. 2 years

5579 ±20 seconds SR920SW Approx. 3 years

Stopwatch: Measuring Capacity: 59'59.9" (60 minutes)

Measuring Unit: 1/10 second

Measurements: Elapsed time; split time; two finishes

Specifications are subject to change without notice.

Using the Stopwatch

Elapsed time

A A A A B

Start Stop Resume Stop Reset

Split time

A B B A B

Start Split Split release Stop Reset

Two finishes

A B A B B

Start Split

First runner

finishes.

Display time of first

runner.

Stop

Second runner

finishes.

Split release

Display time of

second runner.

Reset

Important!

x Do not operate the stopwatch with the crown pulled out.

Note

x An elapsed time operation will stop automatically at the end of 60 minutes.

The stopwatch measures elapsed time in 1/10-second increments up to 59minutes,

59.9seconds.

Perform the following procedure if the stopwatch hands do not return to their 0 (zero)

positions when you reset the stopwatch.

Correcting the 0 Positions of the Hands

Pull the out to Click 2. Crown

Press to move the A Stopwatch 1/10-Second Hand clockwise.

Holding down will move the hand at high speed.A

Press to move the B Stopwatch Second Hand clockwise.

Holding down will move the hand at high speed.B

x The Stopwatch Minute Hand is synchronized with the Stopwatch Second Hand .

After all of the hands are the way you want, push the Crown back in.

Important!

x Timekeeping stops while the crown is pulled out. Correct the current time setting

after performing the above operation.

Especificaciones del producto

Marca:	Casio
Categoría:	Mirar
Modelo:	EFV-550D-1AVUEF
Color del producto:	Zwart
Consumo-anual-de-energía:	57 kWu
Peso del embalaje:	6700 g
Ancho del embalaje:	813 mm
Empaquetadura en profundidad:	156 mm
Altura del embalaje:	540 mm
Clase de eficiencia energética (antigua):	A
Manual de usuario:	Ja
Bluetooth:	Nee
Diagonal de la pantalla:	32 "
Resolución:	1366 x 768 Pixels
Relación de aspecto original:	16:9
red LAN:	Nee
Ángulo de visión, horizontal:	176 °
Ángulo de visión, vertical:	176 °
Sistema de audio:	Nicam / A2
Forma de pantalla:	Flat
Brillo:	200 cd/m²
Tarjeta de garantía:	Ja
Número de puertos USB 2.0:	1
Número de puertos HDMI:	3
Vídeo de componentes (YPbPr/YCbCr):	1
Altavoces incorporados:	Ja
Energía promedio:	16 W
Consumo de energía (en espera):	1 W
Número de hablantes:	2
Salidas de auriculares:	1
tipo HD:	HD
3D:	Nee
Tiempo de respuesta:	6.5 ms
Resoluciones de gráficos compatibles:	1366 х 768
Montaje VESA:	Ja
Interfaz de montaje en panel:	200 x 100 mm
Relación de contraste (dinámica):	3000:1
Profundidad (sin base):	83 mm
Altura (sin base):	438 mm
Ancho (sin base):	737 mm
Peso (sin base):	- g
Diámetro de la pantalla en centímetros.:	82 cm
Entrada de PC (D-Sub):	Ja
miracast:	Nee
Ancho del dispositivo (con soporte):	737 mm
Dispositivo de profundidad (con soporte):	190 mm
Altura del dispositivo (con soporte):	479 mm
Peso (con soporte):	5200 g
soporte de escritorio:	Ja
subwoofer incorporado:	Nee
Teletexto:	Ja
Número de puertos RF:	1
Adecuado para Wi-Fi:	Nee
Número de puertos SCART:	1
Mando a distancia incluido:	Ja
Wifi.:	Nee
Consumo de energía (típico):	39 W