Caso 3162 Manual de Usario

Caso procesador de alimentos 3162

Lee a continuación 📖 el manual en español para Caso 3162 (2 páginas) en la categoría procesador de alimentos. Esta guía fue útil para 3 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios

Descargar PDF
Página 1/2
Assembling the Pasta Maker
1. Undo the front
cover screw and
remove the cover
of the accessory
drive shaft.
2. Put on the
desired pasta
attachment
and tighten the
screw again.
Pasta roller
Pasta width:
up to 140 mm
Fettuccinecutter
Pasta width: 6.5 mm
Spaghetti cutter
Pasta width: 2 mm
Pull the adjustment knob
straight out and turn it to
adjust the pasta thickness.
Roller
adjustment Recommended use
7-8 Knead dough
5-6 Egg noodles
3-4 Spaghetti, fettuccine, lasagne noodles
0-2 Thin fettuccine, tortellini, linguini
Setting the pasta thickness
EN
Braukmann GmbH, Raieisenstraße 9, 59757 Arnsberg, +49 (0) 2932 80554-0, info@caso-design.de, www.caso-design.de
EN
1. Prepare the pasta dough and divide
it into pieces thatt into the pasta
roller.
2. Check that the pasta roller isrmly
mounted on the motor head.
3. Set the desired pasta thickness as
described above.
4. Plug the power plug into the outlet.
5. Tap the button and select a speed
level. We recommend speed level
2–6.
6. Start the appliance by pressing the
button.
7. Put theattened dough into the
rollers to knead it. Fold the dough in
half and roll again. Repeat this pro-
cess until the dough is smooth and
pliable and covers the entire width
of the roller. Reduce the roller setting
from pass to pass until you reach the
desired pasta thickness.
8. Replace the
roller with a
cutting attach-
ment of your
choice. Feed
the rolled
dough sheets
through the cutting attachment.
9. After use, switch o the appliance
with the button and pull the plug
out of the outlet.
Dust the pasta lightly with our during rolling and
cutting to make it drier and easier to separate.
The attachments are only suitable for making pasta or
rolling and cutting fondant. Do not cut or roll out any
other products with the Pasta Maker attachments.
Unplug the Pasta Maker from the power outlet before
assembling/disassembling it.
Braukmann GmbH, Raieisenstraße 9, 59757 Arnsberg, +49 (0) 2932 80554-0, info@caso-design.de, www.caso-design.de
Using the Pasta Maker
After using the Pasta Maker
1. Undo the screw to remove the
pasta attachment and ret the drive
shaft cover to the appliance.
2. To avoid damage to the appli-
ance, do not wash or immerse
the attachment in water or other
liquids. Do not clean in the dish-
washer. Use the enclosed clea-
ning brushes for cleaning.
EN

Especificaciones del producto

Marca: Caso
Categoría: procesador de alimentos
Modelo: 3162

¿Necesitas ayuda?

Si necesitas ayuda con Caso 3162 haz una pregunta a continuación y otros usuarios te responderán


procesador de alimentos Caso Manuales

Caso

Caso 3162 Manual de Usario

9 Septiembre 2024

procesador de alimentos Manuales

Últimos procesador de alimentos Manuales

Kenwood

Kenwood Chef Elite XL KVL6330S Manual de Usario

27 Octubre 2024
Braun

Braun Multiquick MR 6550 MCA Manual de Usario

24 Octubre 2024
Yamazen

Yamazen MFD-G500 Manual de Usario

23 Octubre 2024
Yamazen

Yamazen YHBA-T120 Manual de Usario

23 Octubre 2024
Yamazen

Yamazen YFE-200 Manual de Usario

23 Octubre 2024
Yamazen

Yamazen YMH-400 Manual de Usario

23 Octubre 2024
Yamazen

Yamazen YSLA-Q45 Manual de Usario

23 Octubre 2024
Yamazen

Yamazen YFG-D250 Manual de Usario

23 Octubre 2024
Tefal

Tefal QB505D Masterchef Gourmet Manual de Usario

22 Octubre 2024
Kenwood

Kenwood MG510 Manual de Usario

22 Octubre 2024