CDA KA30SS Manual de Usario

CDA Hundir KA30SS

Lee a continuación 📖 el manual en español para CDA KA30SS (3 páginas) en la categoría Hundir. Esta guía fue útil para 3 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios

Descargar PDF

Página 1/3

www.cda.eu

ka30, ka32,

ka80 and ka82

Stainless Steel

Sinks

Installation

Before Installation

Oer up the sink to the worktop and/or the cabinets to conﬁrm that

the external dimensions of the bowls are compatible with the cabinets

themselves.

Conﬁrm that with the sink in position:

• There is adequate space to install any taps or other required

accessories.

• There is adequate space to install the waste pipework and that any

necessary modiﬁcation to internal shelves to accommodate the waste

(and trap) is acceptable.

• Access to any water stop-cock or other services will still be adequate

after the installation.

Installation

• Refer to the cut-out sizes on the back of this manual and use them

to mark out where the worktop needs to be cut. Double-check the

dimensions before cutting the worktop aperture.

• After cutting out the worktop aperture, we recommend you seal the

cut edges with silicone (or similar) sealant to help prevent ingress of

water.

• Position the supplied gasket around

the perimeter of the hole (Fig. 1).

• It is often easier to mount the taps,

waste-ﬁtting and overﬂow onto the sink

prior to ﬁtting the sink to the worktop.

• Ensure that the external edge of the

sink is positioned on the gasket, to Fig. 1

E & O E. All instructions, dimensions and illustrations are provided for guidance only. CDA reserve the

right to change speciﬁcations without prior notice.

create a barrier to the ingress

of water and other items between sink

and worktop.

• After positioning the sink on the

worktop, position the ﬁxing brackets

as shown in Fig. 2, then tighten their

screws.

• Do not use a power tool to tighten

the screws; by using a hand tool

it is easier to ensure that they are

tightened just enough to clamp down on the worktop and no

more.

• After ﬁxing, remove any excess gasket material with a suitable cutter.

• We recommend a thin bead of silicone sealer is applied around the

perimeter as added protection against water ingress.

• The taps, waste-ﬁtting and overﬂow can now be mounted onto the

sink (if not already done) and fully connected to their respective

services.

• To check the waste for leaks, close the plug/basket of the waste

ﬁtting, open the tap and ﬁll the sink to the level of the overﬂow; turn

o the tap and wait several minutes to verify that the water doesn’t

drain away.

• Empty the sink.

After ﬁtting, ensure that the enclosed “Stainless Steel Sinks Use and

Maintenance” guide is retained for the customer and/or user of the

sink.

Fig. 2

Especificaciones del producto

Marca:	CDA
Categoría:	Hundir
Modelo:	KA30SS
Color del producto:	Zwart
Ancho:	860 mm
Profundidad:	74 mm
Altura:	54 mm
Peso del embalaje:	7400 g
Ancho del embalaje:	932 mm
Empaquetadura en profundidad:	228 mm
Altura del embalaje:	431 mm
Bluetooth:	Ja
Formato de audio soportado:	AAC, AIFF, FLAC, MP3, OGG, WAV
Tecnología de conectividad:	Bedraad en draadloos
Energía promedio:	200 W
Consumo de energía (en espera):	0.5 W
Decodificadores de audio incorporados:	Dolby Digital
Modo de juego:	Ja
Canales de salida de audio:	2.1 kanalen
Sistema de suspensión para la pared.:	Ja
Potencia RMS del altavoz de la barra de sonido:	- W
subwoofer suministrado:	Ja
Soportes de montaje incluidos:	Ja
Peso de la barra de sonido:	1500 g
Tipo de subwoofer:	Actieve subwoofer
Conectividad de subwoofer:	Draadloos
Ancho del subwoofer:	181.5 mm
Altura del subwoofer:	343 mm
Profundidad del subwoofer:	272 mm
Peso del subwoofer:	4300 g
Consumo de energía de la barra de sonido:	20 W
Consumo de energía del subwoofer:	25 W
Mando a distancia incluido:	Ja
Wifi.:	Nee