CDA KG82BL Manual de Usario

Lee a continuación 📖 el manual en español para CDA KG82BL (7 páginas) en la categoría No categorizado. Esta guía fue útil para 8 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios

Página 1/7
www.cda.eu
Composite
Sinks
Installation, Use and Maintenance
2
CE Declaration of Conformity:
Having regard to the Council Directive 89/109/EEC of 21st December
1988 on the approximation of the laws of the Member States relating
to materials and articles intended to come into contact with foodstus,
we declare that the materials composing the sink meet the above-
mentioned directives, in particular the EU Food Contact Regulation
(90/128/EEC and 89/109/EEC along with amendments 92/39/ EEC and
93/9/EEC).
Taking Care of Your Sink
Your CDA sink is manufactured using material developed specifically to
withstand the rigours of everyday kitchen use. However, we advise you
to follow these precautions to keep the sink in pristine condition:
Do not use a plastic washing-up bowl in the sink as grit and other
particles may become embedded in the bowl and scratch
or erode the sink surface. CDA specifically recommend the use of
wire sink-baskets and drainer-racks to help protect your sink. Take
care to not cut the plastic coating on these accessories with sharp
cutlery or the edges of pans, etc.
Do not use neat bleach or other harsh cleaning agents on the metal
sink waste as this may cause tarnishing. This is especially important
if the waste is either solid brass or brass plated.
Avoid dropping heavy or sharp objects into the sink as they may
scratch or damage the surface.
The surface of the sink can be aected by certain chemicals e.g. neat
bleach, nail polish remover, paint stripper, solvents, brush cleaner and
insecticides. If any of these substances come into contact with the
4
Installation
Before Installation
Oer up the sink to the worktop and/or the cabinets to confirm that
the external dimensions of the bowl are compatible with the cabinets
themselves.
Confirm that with the sink in position:
There is adequate space to install any taps or other required
accessories.
There is adequate space to install the waste pipework and that any
necessary modification to internal shelves to accommodate the waste
(and trap) is acceptable.
Access to any water stop-cock or other services will still be adequate
after the installation.
Drain connection
Follow the instructions supplied with the drain fittings.
Cutting the tap hole
Only cut the tap hole from the underside of the sink.
Select the tap hole position based on whether left hand or right hand
drainer is required.
Locate the centre of the required tap hole and cut it out using a
suitable 35mm diameter hole cutter (available from most plumbers
merchants or DIY stores).
Caution: Ensure that the sink is safely supported around the hole
to be cut out.

Especificaciones del producto

Marca: CDA
Categoría: No categorizado
Modelo: KG82BL

¿Necesitas ayuda?

Si necesitas ayuda con CDA KG82BL haz una pregunta a continuación y otros usuarios te responderán




No categorizado CDA Manuales

No categorizado Manuales

Últimos No categorizado Manuales