Celestron NexImage Burst Color Manual de Usario

Celestron Cámara NexImage Burst Color

Lee a continuación 📖 el manual en español para Celestron NexImage Burst Color (12 páginas) en la categoría Cámara. Esta guía fue útil para 2 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios

Página 1/12
NexImage
USER’S MANUAL
Model #93708, #93711
#95518, #95519
ENGLISH
2 | ENGLISH
Congratulations on your purchase of the Celestron NexImage
Solar System imaging camera.
Your NexImage camera comes with the following:
+ NexImage Camera
+ 1.25” nose piece
+ CD including NexImage iCap and RegiStax processing software
+ USB Cable
Recommended Minimum System requirements:
+ Pentium IV, 2.0 GHz, 1GB RAM
+ Graphics card with 24 or 32 bit
+ Windows XP, Windows Vista, Windows 7 (32 & 64 bit)
+ DirectX 9.0c or higher
1.25”
Nose Piece
USB CableNexImage Camera NexImage iCap and
Registax processing
software
Fig 1
ENGLISH | 3
Quick Start
1. Place the CD into your computer’s
CD-ROM drive.
2. Install both the NexImage iCap and
RegiStax software onto your computer.
3. Thread the 1.25” nose piece into the body
of the NexImage camera. See Fig 2.
4. Slide the 1.25” nose piece of the camera
into the eyepiece barrel of your telescope.
See Fig 3.
5. Plug the small end of the USB cable into
the port on the back of the camera.
6. Plug the other end of the USB cable
into a USB port on your computer.
Once connected, the Found New
Hardware message will appear. Follow
the Installation Wizard until the device
has been successfully installed.
Fig 2
Fig 3

Especificaciones del producto

Marca: Celestron
Categoría: Cámara
Modelo: NexImage Burst Color

¿Necesitas ayuda?

Si necesitas ayuda con Celestron NexImage Burst Color haz una pregunta a continuación y otros usuarios te responderán




Cámara Celestron Manuales

Cámara Manuales

Últimos Cámara Manuales