Century MultiGrip Alarm T511 Manual de Usario

Century No categorizado MultiGrip Alarm T511

Lee a continuación 📖 el manual en español para Century MultiGrip Alarm T511 (2 páginas) en la categoría No categorizado. Esta guía fue útil para 5 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios

Página 1/2
INSTRUCTION MANUAL
TM
TM
TM
TM ++
++
++
++
MultiGrip
MultiGrip
MultiGrip
MultiGrip Alarm
Alarm
Alarm
Alarm (
(
(
()
)
)
)
T511
T511
T511
T511
TM ++
MultiGrip Alarm ( )T511
RESET
RESET
RESET
RESETRESET ALARM
ALARM
ALARM
ALARMALARM
HOW TO STOP ALARMING
To stop the alarm release the lock using the magnetic
detacher and it will stop.
MultiGrip
TM
Alarm 511
++
(T )
When you push in the button on the end of the
handle to lock, if flashes times
continuously, it indicates that the tag is in the low battery
state.
lock
10MultiGrip Alarm
TM ++
In normal operation LED flashes once every 20 seconds while the tag is under working.
Frequency: 58KHz/8.2MHz
Dimension: Ø73x50mm
Color: black or customize
Alarm decibel: dB≥95
Battery: CR2450
Usage environment:
Temperature 0~40 (32~104F)
Humidity 20%~85%
: ℃
LOW BATTERY WARNING
NOTICE
SPECIFICATION
1
5
2
4
3
4. Releasing point
3. LED
2. Handle
1. Lock button
5. Speaker
6. Battery cover screw
8. Battery cover
7. Lanyard
COMPONENTS INSTRUCTION
HOW TO ATTACH
Unlocked
Locked
MultiGrip
TM
Alarm 511
++
(T )
1
NOTE: .
2
3
4
5
. Pullout the lanyard;
Ensure the lock is in the “unlocked” position
. Attach around the merchandise.
. Rotate the handle clockwise to wind in the lanyards and tighten it onto the merchandise.
. Push the lock button into the "locked" position, at this point it will beep to let you know that
it is armed. (If it is pushed within 1 minutes after disarmed, no beep happens.)
. Continue to wind the handle to tighten the lanyards around the merchandise, a clicking
sound will occur as you carry this out.
1
2
3
. Place the detacher (standard / super) on the releasing point and press in the lock button
to enable it to pop out and release the lanyards.
. Pullout the lanyard. take merchandise out;
. Rotate the handle clockwise to wind back in the lanyards for storage, leave it in the
"unlocked" position so that it is unarmed and saving the battery life while not in use.
1 2 3
HOW TO RELEASE
MULTI ALARM TECHNOLOGY
Alarm1:
If the armed multigrip is taken into the
system will trigger system alarming.
Anti tamper, the multigrip will alarm If
the wire is cut or tampered with.
Alarm2:
Alarm2
Alarm1
23
HOW TO CHANGE BATTERY
1
MultiGrip
TM
Alarm 511
++
(T )

Especificaciones del producto

Marca: Century
Categoría: No categorizado
Modelo: MultiGrip Alarm T511

¿Necesitas ayuda?

Si necesitas ayuda con Century MultiGrip Alarm T511 haz una pregunta a continuación y otros usuarios te responderán




No categorizado Century Manuales

No categorizado Manuales

Últimos No categorizado Manuales