Chamberlain MC100C-P2 Manual de Usario
Chamberlain
Abridor de puerta de garaje
MC100C-P2
Lee a continuación 📖 el manual en español para Chamberlain MC100C-P2 (9 páginas) en la categoría Abridor de puerta de garaje. Esta guía fue útil para 2 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios
Página 1/9
UNIVERSAL GARAGE DOOR
MINI REMOTE CONTROL
The Universal Garage Door Mini
Remote Control can be
programmed to activate up to
two products, such as a garage
door opener, myQ
® light
controls, gate operator, or
commercial door operator. Each
button on the remote control
works independently of the other and must be programmed
separately. The images throughout this manual are for reference
only and your product may look different.
The Universal Garage Door Mini Remote Control can be
programmed to operate with different brands of garage door
openers. It is compatible with most garage door opener systems
manufactured by Chamberlain
®
, LiftMaster ®, Sears Craftsman ®
,
Garage Master ®
, Genie ®, Linear
® , Stanley ®
, Overhead Door ®,
Wayne Dalton ®, Moore-O-Matic
® , Do-It ®
, Master Mechanic ®,
Raynor ®, Sommer
®, Xtreme Garage ®, Ryobi ®, and True Value
®
.
MODELS MC100-P2 AND
MC100C-P2
WARNING: This product can expose
you to chemicals including lead, which
are known to the State of California to
cause cancer or birth defects or other
reproductive harm. For more information
go to www.P65Warnings.ca.gov.
To prevent possible SERIOUS INJURY or DEATH from a moving
gate or door:
• ALWAYS keep remote controls out of reach of children.
NEVER permit children to operate, or play with remote control
transmitters.
• Activate gate or door ONLY when it can be seen clearly, is
properly adjusted and there are no obstructions to door travel.
• ALWAYS keep gate or door in sight until completely closed.
NEVER permit anyone to cross path of moving gate or door.
* LiftMaster
®, Do-It
®, Master Mechanic
®, Raynor
®, True Value
®,
Sommer ®
, Xtreme Garage ®, Ryobi ®, and Sears Craftsman
® are
compatible with Chamberlain technology.
**Visit www.chamberlain.com/MC100 for Genie
® Intellicode II instructions.
Read instructions thoroughly BEFORE beginning. If using the
Universal Garage Door Mini Remote Control with residential
door openers, the remote control must be used only
with door openers manufactured after 1993 that
utilize photoelectric sensors. The photoelectric
sensors are always located on or near the bottom of
the door track.
STOP
Garage Door Opener
Brand
Type/Color of
Program/Learn button Year
Linear®Mega-Code '97-Current
Chamberlain®* Orange/Red '97-'03
Chamberlain®* Purple '05-Current
Chamberlain®* Green '93-'96
Genie® Overhead Door®Intellicode '95-Current
Genie®** Overhead Door®Intellicode '93-Current
Stanley®Secure Code '98
Chamberlain®* Yellow '11-Current
Sommer®Rolling Code ‘13-Current
Wayne Dalton®Rolling Code ‘99
Xtreme Garage®Fix Code ‘16-Current
Ryobi®Rolling Code ‘16-Current
The Universal Garage Door Mini Remote Control is compatible
with the following brands, which use a program/learn button:
PROGRAMMING
Press and hold the bottom button on
the remote control until the blue LED
stays solid (approximately 10
seconds) then release the button.
Start with your garage door or gate closed.
Press and release the Program/LEARN button on your
product. A ladder may be necessary to reach the Program/
LEARN button.
LED
2
1
3
4
5
TEST
Test the remote control by pressing the button you programmed
in step 4. If the garage door opener does not activate, repeat the
programming steps or visit www.chamberlain.com/MC100 for
additional instructions.
When the garage door or gate begins to open, immediately
press and release either button on the remote control to
confirm the code and exit programming.
On the remote control, press and release the button twice
that you would like to program. The blue LED will blink for
up to 60 seconds and the remote control will begin sending
the preprogrammed codes to the garage door opener.
Transmission can take up to 60 seconds.
IMPORTANT: The remote will activate your door or gate during
programming. Ensure door is clear of ALL obstructions.
Bottom
Button
PROGRAM/LEARN
BUTTON
Press the LEARN
button twice.
OR
Especificaciones del producto
| Marca: | Chamberlain |
| Categoría: | Abridor de puerta de garaje |
| Modelo: | MC100C-P2 |
¿Necesitas ayuda?
Si necesitas ayuda con Chamberlain MC100C-P2 haz una pregunta a continuación y otros usuarios te responderán
Abridor de puerta de garaje Chamberlain Manuales
18 Octubre 2024
19 Septiembre 2024
5 Septiembre 2024
1 Septiembre 2024
13 Agosto 2024
13 Agosto 2024
11 Agosto 2024
10 Agosto 2024
5 Agosto 2024
4 Agosto 2024
Abridor de puerta de garaje Manuales
- Abridor de puerta de garaje Aperto
- Abridor de puerta de garaje Einhell
- Abridor de puerta de garaje Somfy
- Abridor de puerta de garaje Craftsman
- Abridor de puerta de garaje Marantec
- Abridor de puerta de garaje Liftmaster
- Abridor de puerta de garaje Berner
- Abridor de puerta de garaje Hormann
- Abridor de puerta de garaje Sommer
- Abridor de puerta de garaje Doco
- Abridor de puerta de garaje Novoferm
- Abridor de puerta de garaje Goris
- Abridor de puerta de garaje Tormatic
- Abridor de puerta de garaje FAAC
- Abridor de puerta de garaje MAC
- Abridor de puerta de garaje Superrollo
- Abridor de puerta de garaje Dickert
- Abridor de puerta de garaje DITEC
- Abridor de puerta de garaje Geba Tronic
- Abridor de puerta de garaje Profitech
- Abridor de puerta de garaje Seculux
- Abridor de puerta de garaje Homentry
- Abridor de puerta de garaje Doorsystems
- Abridor de puerta de garaje Novotecnica
- Abridor de puerta de garaje Entrematic
- Abridor de puerta de garaje Skylink
Últimos Abridor de puerta de garaje Manuales
30 Septiembre 2024
30 Septiembre 2024
30 Septiembre 2024
28 Septiembre 2024
23 Septiembre 2024
22 Septiembre 2024
20 Septiembre 2024
20 Septiembre 2024
15 Septiembre 2024
14 Septiembre 2024