Chapin 82108N Manual de Usario

Chapin No categorizado 82108N

Lee a continuación 📖 el manual en español para Chapin 82108N (22 páginas) en la categoría No categorizado. Esta guía fue útil para 3 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios

Descargar PDF

Página 1/22

PROFESSIONAL/CONTRACTOR SALT SPREADER Assembly / Operation Instructions / Parts

CHAPIN INTERNATIONAL, INC. P.O. BOX 549 700 ELLICOTT ST. BATAVIA, NY 14021-0549 www.chapinmfg.com 800-950-4458

Please call if you are missing any parts, having trouble assembling, or have any questions regarding the 800-950-4458

safe operation of this product.

DO NOT RETURN TO THE STORE

MODEL 82108N/82088N

Carefully Read These Instructions Before Use

IMPROPER USE OR FAILURE TO FOLLOW INSTRUCTIONS CAN RESULT IN PRODUCT FAILURE OR INJURIES. FOR SAFE

USE OF THIS PRODUCT YOU MUST READ AND FOLLOW ALL INSTRUCTIONS BEFORE USING.

- Do not allow anyone to operate the broadcast spreader without proper instructions

- Do not permit children to operate the broadcast spreader

- Wear protective eyewear and gloves when handling and applying lawn and garden chemicals

- Read the chemical label instructions and warnings for handling and applying the chemicals you plan to

spread – application settings provided are only a guideline

WARNING

Model 82108N

100 lb. Spreader

013524 R0714

Model 82088N

80 lb. Spreader

ASSEMBLY INSTRUCTIONS

CHAPIN INTERNATIONAL, INC. P.O. BOX 549 700 ELLICOTT ST. BATAVIA, NY 14021-0549 www.chapinmfg.com 800-950-4458

Suggested Tools:

Wrench and/or Ratchet Set

1.5mm Allen Wrench

Pliers

Protective Eyewear

Approximate assembly time is 20-45 minutes

NOTE: Depending on model, this package may contain

additional hardware not needed for assembly.

Full scale nuts and bolts

M5 Nylon Locknut (1)

M6 Nylon Locknut (7) M6 x 55mm Hex Bolt (6) M6 x 45mm Hex Bolt (1)

M5 x 35mm Hex Bolt (1)

Flat Washer (1) Cotter Pin (1)

End Cap (2)

Hand Grip (2)

Bushings (2)

Step 1:

Attach the right Frame leg and the le Frame leg to the Frame

Body using (2) M6x55mm hex bolts and (2) M6 Nylon locknuts

per frame leg. Aer the frame legs have been attached, place the

two End caps onto the bottom of both frame legs. DO NOT

TIGHTEN DOWN COMPLETELY.

NOTE: Use bottom hole pattern on legs if equipped.

CHAPIN INTERNATIONAL, INC. P.O. BOX 549 700 ELLICOTT ST. BATAVIA, NY 14021-0549 www.chapinmfg.com 800-950-4458

Step 2:

Slide bushings into the holes on

the hopper frame from outside

of the frame.

Step 3:

Insert Axle into Tire as shown and secure using (1)

M6 x 45mm Hex Bolt and (1) M6 Nylon Locknut.

Take note of hole locations on Axle, to ensure

correct orientation.

Hole at top

Especificaciones del producto

Marca:	Chapin
Categoría:	No categorizado
Modelo:	82108N
Peso.:	1225 g
Ancho:	150 mm
Profundidad:	222 mm
Altura:	75 mm
Colocación:	Muur
Tipo de conector USB:	Micro-USB
Número de puertos USB 2.0:	1
Número de puertos Ethernet LAN (RJ-45):	1
Opción de montaje de bloqueo de cable:	Ja
Tipo de ranura para candado de cable:	Kensington
Modulación:	16-QAM, 64-QAM, 256-QAM, BPSK, CCK, QPSK
LAN Ethernet, velocidades de transferencia de datos:	10,100,1000 Mbit/s
Estándar de red:	IEEE 802.11a, IEEE 802.11ac, IEEE 802.11b, IEEE 802.11g, IEEE 802.11n, IEEE 802.3at, IEEE 802.3az
Algoritmos de seguridad compatibles:	IPSec
Temperatura de almacenamiento:	-40 - 70 °C
Interno:	Nee
Conexión de antena:	RP-SMA
Altura operativa:	0 - 3000 m
Velocidad máxima de transferencia de datos:	1733 Mbit/s
2,4GHz:	Ja
5GHz:	Ja
MDI/MDI-X automático:	Ja
Alimentación a través de Ethernet (PoE):	Ja
Número de conectores:	6
Consumo de energía (típico):	23 W
Temperatura de funcionamiento (TT):	-40 - 60 °C
Humedad relativa de funcionamiento (VV):	5 - 95 procent
Código del Sistema Armonizado (SA):	85176990
Método de espectro ensanchado:	DSSS, OFDM