Chief CMS261W Manual de Usario

Lee a continuación 📖 el manual en español para Chief CMS261W (4 páginas) en la categoría Accesorio para proyector. Esta guía fue útil para 3 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios

Página 1/4
I N S T A L L A T I O N I N S T R U C T I O N S
Cut-Off Thread Adapter
CMS261
CMS261 Installation Instructions
2
DISCLAIMER
Milestone AV Technologies, Inc., and its affiliated corporations
and subsidiaries (collectively, "Milestone"), intend to make this
manual accurate and complete. However, Milestone makes no
claim that the information contained herein covers all details,
conditions or variations, nor does it provide for every possible
contingency in connection with the installation or use of this
product. The information contained in this document is subject
to change without notice or obligation of any kind. Milestone
makes no representation of warranty, expressed or implied,
regarding the information contained herein. Milestone assumes
no responsibility for accuracy, completeness or sufficiency of
the information contained in this document.
Chieis a registered trademark of Milestone AV Technologies.
All rights reserved.
IMPORTANT WARNINGS AND
CAUTIONS!
WARNING: A WARNING alerts you to the possibility of
serious injury or death if you do not follow the instructions.
CAUTION: A CAUTION alerts you to the possibility of
damage or destruction of equipment if you do not follow the
corresponding instructions.
WARNING: Failure to read, thoroughly understand, and
follow all instructions can result in serious personal injury,
damage to equipment, or voiding of factory warranty! It is the
installer’s responsibility to make sure all components are
properly assembled and installed using the instructions
provided.
WARNING: Exceeding the weight capacity can result in
serious personal injury or damage to equipment! It is the
installer’s responsibility to make sure the combined weight of
all components attached to the CMS-261 does not exceed
500 lbs (226.80 kg).
The weight capacity of the CMS-261 may be LIMITED
to the lowest weight capacity of any other component
located between the CMS-261 and the supporting
structure!
DIMENSIONS
135.00°
2.338
59.39
90.0
3X 5/16-18 THREADED HOLE 1-1/2 NPT THREADS
40.44
1.592
51.56
2.030
114.30
4.500
57.15
2.250
48.26
1.900
3X 1.000
25.40
MEASUREMENTS: [MILLIMETERS]
INCHES
Installation Instructions CMS261
3
TOOLS REQUIRED / PARTS PROVIDED
ASSEMBLING COLUMN
1. If required, cut off 1-1/2" NPT pipe at desired length.
2. Drill a 5/16" hole 1" from end of pipe. (See Figure 1)
Figure 1
3. Slide CMS-261 (A) onto end of pipe and attach with a
5/16 x 1/2" button head cap screw (B) or 5/16 x 1/2" button
head security cap screw (C). (See Figure 2)
Figure 2
4. Attach and tighten two 5/16 x 1/4" set screws (D) or two
5/16 x 1/4" security set screws (E) into side of CMS-261 (A).
(See Figure 3)
Figure 3
Install the 1-1/2" NPT threaded column with the attached
CMS-261 following instructions provided with the column.
5/16"
5/32" Security
(Included) 3/16" Security
(included)
A (1)
B (1)
5/16 x 1/2"
C (1)
5/16 x 1/2"
(Security)
D (2)
5/16 x 1/4"
E (2)
5/16 x 1/4"
(Security)
G (1)
5/32"
(Security)
F (1)
3/16"
(Security)
5/16" x 1"
1" from end of pipe
2
Pipe
3
(B) or (C) x 1
(A)
4
(D) or (E) x 2

Especificaciones del producto

Marca: Chief
Categoría: Accesorio para proyector
Modelo: CMS261W

¿Necesitas ayuda?

Si necesitas ayuda con Chief CMS261W haz una pregunta a continuación y otros usuarios te responderán




Accesorio para proyector Chief Manuales

Accesorio para proyector Manuales

Últimos Accesorio para proyector Manuales