Chief HB32B Manual de Usario

Chief Accesorio para proyector HB32B

Lee a continuación 📖 el manual en español para Chief HB32B (3 páginas) en la categoría Accesorio para proyector. Esta guía fue útil para 3 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios

Descargar PDF

Página 1/3

8803-000104

12/07

CHIEF MANUFACTURING INC. 1-800-582-6480, Fax: 1-877-894-6918, Email: chief@chiefmfg.com

HB-32B

VIDEO PROJECTOR CEILING MOUNT

FOR DIGITAL PROJECTION TITAN SERIES,

The Chief HB32B video projector ceiling mount is designed to provide fast, simple and secure installation of the Barco

CLM10+. Special roll, pitch, yaw and horizontal adjustments simplify projection positioning for image alignment. The

HB32B mount also has positive registration lock so that the projector may be removed without losing projector mount

registration.

WARNING: IMPROPER INSTALLATION MAY RESULT IN SERIOUS PERSONAL

INJURY! All components must be securely fastened to each other and to the ceiling, AND

the ceiling MUST be capable of supporting 5 times the total weight of the installation. If it

cannot, the ceiling be reinforced.MUST

Unpack and check contents:

(1) Deluxe ceiling mount housing assembly. (3) M10 Washers, Flat

(1) Panasonic mounting bracket (3) M10 x 1.5 x 50mm, bolt

(4) 5/16” Flange Nuts (6) .5” x .257” x .625” nylon spacers

INSTALLATION INSTRUCTIONS

1. Turn your projector upside down.

2. Place the three 5/8” tall nylon spacers on the bottom of your projector and stack the second three on top of the

fist ones so they are two spacers tall.

3. Place the Barco custom mounting bracket over on these nylon spacers on the bottom of your projector lining up

with the three threaded inserts in the bottom of the projector with the three holes in the bracket.

4. Slide the (3) M10 washers, one on each (3) M10 x 50mm bolt and install them into the three threaded inserts in

the projector. Securely tighten all three mounting bolts at this time.

4. Be sure that the method of support you are using for the VCM ceiling mount is securely installed to the ceiling.

If not, the ceiling must be reinforced. Improper installation may result in serious personal injury.

5. Attach the VCM housing to your method of support and tighten firmly so the VCM housing is square to the

screen.

PRECAUTION: Installing a ceiling mount requires the presence of two persons familiar with

mechanical installations. A third assistant is recommended.

6. With the help of your assistants, lift the projector and install it to the four studs extending from the mounting

plate. Be sure the Panasonic mounting plate is seated in slots. Tighten securely using the (4) 5/16” flange

nuts.

For projector alignment see attached sheet.

Especificaciones del producto

Marca:	Chief
Categoría:	Accesorio para proyector
Modelo:	HB32B
Ancho:	235 mm
Profundidad:	170 mm
Adaptador gráfico:	GeForce 7025
Tipo de fuente de energía:	ATX
Número de puertos USB 2.0:	4
Puerto(s) VGA (D-Sub):	1
Micrófono, entrada de línea:	Ja
Número de puertos Ethernet LAN (RJ-45):	1
Salidas de auriculares:	1
Zócalo del procesador:	Socket AM3
Fabricante del procesador:	AMD
Memoria interna máxima:	8 GB
Adaptador de gráficos incorporado:	Ja
Sistemas operativos compatibles:	Windows XP/Vista/7
Canales de salida de audio:	5.1 kanalen
Guía de Instalación Rápida:	Ja
Tipo de interfaz Ethernet:	Fast Ethernet
placa base con chipset:	Nvidia MCP68S
Controladores suministrados:	Ja
Ranuras PCI Express x16:	1
Familia de adaptadores gráficos:	NVIDIA
Canal de memoria:	Dubbelkanaals
Puerto(s) PS/2:	2
Componente para:	PC
Controlador LAN:	Realtek RTL8201CL
Tipos de incursión:	0, 1
Adaptador de gráficos de memoria máxima:	512 MB
Ranuras PCI:	1
Procesadores compatibles:	AMD Phenom II X2, AMD Phenom II X4, AMD Phenom X3, AMD Phenom X4
Máx. número de procesadores SMP:	1
Factor de forma de la placa base:	micro ATX
Número de ranuras de memoria:	2
Velocidades de reloj de memoria admitidas:	400,533,667,800,1066 MHz
Soporte para procesamiento paralelo:	Niet ondersteund
Conexión para refrigerador de CPU:	Ja
Conector de alimentación ATX (24 pines):	Ja
Conexión del ventilador de la fuente de alimentación:	Ja
Conexiones USB 2.0:	2
Conexión para panel de audio en el frente:	Ja
Conexión para unidad de disquete:	Ja
Número de conexiones ATA paralelas:	1
Número de conectores SATA II:	2