Chief HB42E Manual de Usario

Chief Accesorio para proyector HB42E

Lee a continuación 📖 el manual en español para Chief HB42E (2 páginas) en la categoría Accesorio para proyector. Esta guía fue útil para 5 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios

Descargar PDF

Página 1/2

I N S TA L L A T I O N I N S T R U C T I O N S

Milestone AV Technologies, Inc., and its affiliated corporations and subsidiaries (collectively, "Milestone"), intend to make this manual accurate and complete. However, Milestone

makes no claim that the information contained herein covers all details, conditions or variations, nor does it provide for every possible contingency in connection with the installation

or use of this product. The information contained in this document is subject to change without notice or obligation of any kind. Milestone makes no representation of warranty, ex-

pressed or implied, regarding the information contained herein. Milestone assumes no responsibility for accuracy, completeness or sufficiency of the information contained in this

document.

• P: 800.582.6480 / 952.894.6280 • F:877.894.6918 / 952.894.6918

8803-000108 RevA

1/09

MODEL: HB-42E Custom Projector Bracket

Unpack carton and verify contents. If any listed parts are miss by calling ing, immediately contact a Chief Customer Service representative

1-800-582-6480.

PARTS

Figure 1:

INSTALLATION

WARNING:

IMPROPER INSTALLATION MAY RESULT IN SERIOUS PERSONAL INJURY! All components must be securely fastened

to each other and to the ceiling, and the ceiling must be capable of supporting five times the total weight of the installation.

1. Stack nylon spacers on top of each other and on top of projector under center hole. (See Figure 1)

2. Lower custom HB bracket onto nylon spacers. Ensure that the two corner tabs are toward the back of the projector, and three tabs toward

the front. (See Figure 1)

3. Attach HB bracket to projector using one M8 x 45mm button head screw and flat washer through center hole and nylon spacers. (See

Figure 1)

4. Install seven M8 x 12mm button head screws and M8 flat washers through corner and end tabs on bracket. (See Figure 1)

(1) BRACKET, Custom HB (4) NUT, Flange, Hex, 5/16-18

(7) SCREW, Button Head, M8 x 12mm (2) NYLON SPACER, .680x.390x.625

(1) SCREW, Button Head, M8 x 45mm (8) WASHER, Flat, M8

(1) KEY, Hex, M5

Corner tabs

toward back

of projector

x 1

x 7

I N S T A L L A T I O N I N S T R U C T I O N S

Continued

Continued...

CAUTION:

Installing a ceiling mount requires the presence of two persons familiar with mechanical installations. A third assistant is

recommended.

Figure 2:

5. Attach VCM housing to your method of support and tighten firmly so the VCM housing is square to the screen.

6. With help of assistants, lift the projector and install it to the VCM housing. Ensure that the the four studs extending from VCM housing is

seated in slots on HB bracket. (See Figure 2)

7. Tighten the four 5/16" flange nuts. (See Figure 2)

VCM Housing

x 4

Seat VCM in HB

bracket slots

Especificaciones del producto

Marca:	Chief
Categoría:	Accesorio para proyector
Modelo:	HB42E
Color del producto:	Wit
Peso.:	900 g
Fuente de alimentación:	100 - 240V, 50/60Hz, 0.8A
Indicadores LED:	Ja
Número de puertos USB 2.0:	1
Certificación:	CE, FCC
Conexión para adaptador de red:	Ja
Interfaz:	USB
Potencia de salida:	24 W
Sistemas operativos compatibles:	Windows 2000, XP, Vista, 7\nMac 10.3\nLinux
Corriente de salida:	2 A
Abarcando:	12 V
Velocidad máxima de transferencia de datos:	480 Mbit/s
tipo de cable:	USB
Dimensiones (Ancho x Fondo x Alto):	135 x 70 x 95 mm
Conexiones de disco duro compatibles:	SATA