Chief HB49E Manual de Usario

Chief Accesorio para proyector HB49E

Lee a continuación 📖 el manual en español para Chief HB49E (1 páginas) en la categoría Accesorio para proyector. Esta guía fue útil para 7 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios

Descargar PDF

Página 1/1

8803-000006

49E

IDEO

ROJECTOR

EILING

OUNT

for Eiki LC-SX4/L, LC-X4/L, Christie Digital Vivid Blue, Sanyo PLC-EF30L,

PLC-XF30L,

The Chief HB49E video projector ceiling mount is designed to provide a fast, simple and secure installation of your

projector. Special roll, pitch, yaw and horizontal adjustments simplify projection positioning for image alignment. The

HB49E mount also has positive registration lock so that the projector may be removed without losing projector mount

registration.

WARNING: IMPROPER INSTALLATION MAY RESULT IN SERIOUS PERSONAL INJURY!

All components must be securely fastened to each other and to the ceiling, AND the ceiling

MUST be capable of supporting 5 times the total weight of the installation. If it cannot, the

ceiling MUST be reinforced.

Unpack and check contents:

(1) Deluxe ceiling mount housing assembly. (6) M8 - 12mm BHSCS

(1) HB Left Mounting Bracket (6) M8 - Flatwasher

(1) HB Right Mounting Bracket (4) 5/16” Flange Nuts

(1) M5.Allen Wrench

INSTALLATION INSTRUCTIONS

1. Turn your projector upside down.

2. Locate the three threaded brass inserts on each side of the bottom of the projector.

3. Place the mounting brackets on the projector lining up the three mounting holes in the brackets with the three

threaded brass inserts in the bottom of the projector.

4. Using the six M8 – 12mm screws and flatwashers, screw them into the six threaded inserts in the bottom of the

projector using the allen wrench provided. Securely tighten all six mounting screws at this time.

5. Be sure that the method of support you are using for the VCM ceiling mount is securely installed to the ceiling. If

not, the ceiling must be reinforced. Improper installation may result in serious personal injury.

6. Attach the VCM housing to your method of support and tighten firmly so the VCM housing is square to the

screen.

PRECAUTION: Installing a ceiling mount requires the presence of two persons familiar with mechanical

installations. A third assistant is recommended.

7. With the help of your assistants, lift the projector and install it to the studs extending from the mounting plate. Be

sure the HB49E mounting plate is seated in the slots prior to releasing hand from handles. Tighten securely

using the 5/16” flange nuts.

For projector alignment see attached sheet.

Especificaciones del producto

Marca:	Chief
Categoría:	Accesorio para proyector
Modelo:	HB49E
Color del producto:	Roestvrijstaal
Ancho:	860 mm
Profundidad:	500 mm
Peso del embalaje:	7400 g
Ancho del embalaje:	940 mm
Empaquetadura en profundidad:	560 mm
Altura del embalaje:	250 mm
Manual de usuario:	Ja
Ancho del compartimento de instalación:	840 mm
Profundidad del compartimento de instalación:	480 mm
tipo de fregadero:	Opbouwwasbak
Fregadero de forma:	Rechthoekig
Material del fregadero:	Roestvrijstaal
Número de lavabos:	1 kommen
Formar el primer fregadero:	Rechthoekig
Dimensiones del primer recipiente (WxL):	362.5 x 400 mm
Primero viene la profundidad:	185 mm
Kraangat:	Ja
Número de orificios para grifos:	1
Encimera:	Ja
Grifo incluido:	Nee
Tamaño del fregadero:	3.5 "
Colocar encimera:	Rechts