Chief SLM8630 Manual de Usario

Lee a continuación 📖 el manual en español para Chief SLM8630 (1 páginas) en la categoría Accesorio para proyector. Esta guía fue útil para 4 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios

Página 1/1
SLB-8630 H
ANGER
B
RACKET
FOR
3M MP8630
Unpack carton and check contents:
(1) SLB-8630 Plate (2) U-Form Rod
(4) 10-24 Lock Nuts (4) #10 Flatwashers
(8) Felt Squares (6) Thumb Nuts
I
NSTALLATION
I
NSTRUCTIONS
1. Turn projector upside down.
2. Place the SLB-8630 Plate onto the projector bottom.
3. Attach the U-Form rods around the projector and up through the two holes in the
SLB-8630 plate using the #10 flatwashers and 10-24 nylock nuts. NOTE: The
U-Form rods MUST be attached for mount to properly support projector.
This is a correct fit. DO NOT OVERTIGHTEN U-Form rod to projector.
Only tighted until a secure fit is achieved. Felt squares are provided to
protect projector shell, if desired. They can be attached to the projector or
wrapped around the U-Form rod.
4. See RPA and/or Smart-Lift™ Instructions.
CHIEF MANUFACTURING INC. 1-800-582-6480, Fax: 1-877-894-6918, Email: chief@chiefmfg.com

Especificaciones del producto

Marca: Chief
Categoría: Accesorio para proyector
Modelo: SLM8630

¿Necesitas ayuda?

Si necesitas ayuda con Chief SLM8630 haz una pregunta a continuación y otros usuarios te responderán




Accesorio para proyector Chief Manuales

Accesorio para proyector Manuales

Últimos Accesorio para proyector Manuales