Chief SSB021 Manual de Usario

Chief Accesorio para proyector SSB021

Lee a continuación 📖 el manual en español para Chief SSB021 (1 páginas) en la categoría Accesorio para proyector. Esta guía fue útil para 4 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios

Descargar PDF

Página 1/1

I N S T A L L A T I O N I N S T R U C T I O N S

Milestone AV Technologies, and its affiliated corporations and subsidiaries (collectively, "Milestone"), intend to make this manual accurate and complete. However, Milestone makes

no claim that the information contained herein covers all details, conditions or variations, nor does it provide for every possible contingency in connection with the installation or use

of this product. The information contained in this document is subject to change without notice or obligation of any kind. Milestone makes no representation of warranty, expressed or

implied, regarding the information contained herein. Milestone assumes no responsibility for accuracy, completeness or sufficiency of the information contained in this document.

Chief Manufacturing, a products division of Milestone AV Technologies

8401 Eagle Creek Parkway, Savage, MN 55378

• P: 800.582.6480 / 952.894.6280 • F:877.894.6918 / 952.894.6918

8850-000018 Rev01

a Duchossois Group Company

05/09

Installation Instructions

WARNING: OVER TIGHTENING OF SCREWS CAN DAMAGE PARTS AND CAN LEAD TO SERIOUS PERSONAL INJURY AND

DAMAGE TO EQUIPMENT! DO NOT over tighten screws when installing interface bracket.

NOTE: Step 1 is only required when installing an SLB/SSB interface bracket. If an SLM/SSM bracket is being installed, proceed to step 2.

1. Screw thumb screws onto 10-24 x 5/8" Phillips pan head screws. DO NOT fully tighten thumb screws at this time.

2. Turn projector upside down.

3. Place interface bracket onto bottom of projector and align mounting holes in bracket with threaded inserts in projector.

4. Using three M6 x 10mm Phillips pan head screws, secure interface bracket to projector and tighten all fasteners at this time.

NOTE: Security screws can be substituted when mounting interface bracket to projector by using the parts and installation

instructions in the All-Points Security Kit.

SSB-021, SSM-021, SLB-021 and SLM-021 Interface Brackets

SSB-021, SSM-021, SLB-021 and SLM-021 Interface Brackets are designed for use with Chief® Series Projector Mounts. See the

specific installation instructions provided with the mount for additional installation information.

Unpack carton and verify kit contents. If any listed parts are missing, immediately contact a Chief Customer Service representative.

WARNING: IMPROPER INSTALLATION CAN LEAD TO EQUIPMENT FALLING CAUSING SERIOUS PERSONAL INJURY

AND DAMAGE TO EQUIPMENT! DO NOT substitute hardware. Use only hardware supplied by manufacturer!

(1) Interface Bracket (3) Screw, Phillips Pan Head, Machine, M6 x 10mm

(6) 10-24 Thumb Nuts ** (3) Washer, Flat, M6

(1) All-Points Security Kit

**Only used when installing SLB/SSB interface brackets.

NOTE: Specific to SSB-style and SSM-style interface bracket installation, all appropriate screws come pre-installed as reflected in the

encircled locations above. DO NOT attempt to substitute and USE ONLY this pre-installed hardware for SSB-style and SSM-

style interface bracket installation.

SLM-021

(

)

(

Note: SSB-sty

)

Towards front of

projector

Towards front of

projector

SLB-021

Especificaciones del producto

Marca:	Chief
Categoría:	Accesorio para proyector
Modelo:	SSB021
Tipo de operación:	Knoppen
Color del producto:	Zwart
Pantalla incorporada:	Nee
Ancho:	900 mm
Profundidad:	500 mm
Altura:	- mm
Nivel de ruido:	- dB
Amable:	Muurmontage
Potencia del motor:	140 W
Motor incluido:	Ja
Número de motores:	1
Capacidad máxima de extracción:	500 m³/uur
Método de extracción:	Luchtafvoer
Número de lámparas:	2 gloeilamp(en)
Tipo de lámpara:	Halogeen
Tipo filtro veterinario:	Metaal
Altura (mín.):	810 mm
Altura (máx.):	1140 mm
Lámpara de encendido:	28 W
Número de velocidades:	3
Ubicación del escape:	Boven