Chief SSB137 Manual de Usario

Chief Accesorio para proyector SSB137

Lee a continuación 📖 el manual en español para Chief SSB137 (1 páginas) en la categoría Accesorio para proyector. Esta guía fue útil para 10 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios

Descargar PDF

Página 1/1

I N S T A L L A T I O N I N S T R U C T I O N S

Milestone AV Technologies, and its affiliated corporations and subsidiaries (collectively, "Milestone"), intend to make this manual accurate and complete. However, Milestone makes

no claim that the information contained herein covers all details, conditions or variations, nor does it provide for every possible contingency in connection with the installation or use

of this product. The information contained in this document is subject to change without notice or obligation of any kind. Milestone makes no representation of warranty, expressed or

implied, regarding the information contained herein. Milestone assumes no responsibility for accuracy, completeness or sufficiency of the information contained in this document.

Chief Manufacturing, a products division of Milestone AV Technologies

8401 Eagle Creek Parkway, Savage, MN 55378

• P: 800.582.6480 / 952.894.6280 • F:877.894.6918 / 952.894.6918

8802-000252 Rev01

a Duchossois Group Company

05/09

SSB-185, SSM-185, SLB-185 and SLM-185 Interface Brackets

SSB-185, SSM-185, SLB-185 and SLM-185 Interface Brackets are designed for use with Chief® Series Projector Mounts. See the specific

installation instructions provided with the mount for additional installation information.

Unpack carton and verify kit contents. If any listed parts are missing, immediately contact a Chief Customer Service representative.

WARNING: IMPROPER INSTALLATION CAN LEAD TO EQUIPMENT FALLING CAUSING SERIOUS PERSONAL INJURY AND

DAMAGE TO EQUIPMENT! DO NOT substitute hardware. Use only hardware supplied by manufacturer!

Installation Instructions

WARNING: OVER TIGHTENING OF SCREWS CAN DAMAGE PARTS AND CAN LEAD TO SERIOUS PERSONAL INJURY AND

DAMAGE TO EQUPIMENT! DO NOT over tighten screws when installing interface brackets.

NOTE: Step 1 is only required when installing an SLB/SSB interface bracket. If an SLM/SSM bracket is being installed, proceed to step 2.

1. Screw thumb screws onto 10-24 x 5/8" Phillips pan head screws. DO NOT fully tighten thumb screws at this time.

2. Turn projector upside down on a flat surface.

3. Place 1/2" nylon spacers over threaded inserts in bottom of projector.

4. Place interface bracket onto the 1/2" nylon spacers and align the mounting holes in bracket with holes in spacers.

5. Position M4 x 20mm flat head screws into countersunk holes in bracket.

6. Position the M4 x 20mm pan head screw with an M4 washer into threaded insert in projector. Tighten all fasteners at this time, securing

the bracket to the projector.

NOTE: Security screws can be substituted when mounting interface bracket to projector by using the parts and installation instructions in the

All-Points Security Kit.

(1) Interface Bracket (1) Screw, Phillips Pan Head, Machine, M4 x 20mm

(6) 10-24 Thumb Nuts ** (1) Washer, M4

(1) All-Points Security Kit (2) Screw, Phillips Flat Head, M4 x 20mm

(3) Spacer, 1/2" x 1/2"

**Only used when installing SLB/SSB interface brackets.

NOTE: Specific to SSB-style and SSM-style interface bracket installation, all appropriate screws come pre-installed as reflected in the

encircled locations above. DO NOT attempt to substitute and USE ONLY this pre-installed hardware for SSB-style and SSM-style

interface bracket installation.

SLB-185 SLM-185

Towards front of

projector

Towards front of

projector

(Note: SSM-style interface bracket connections

)

(

Note: SSB-style interface bracket connections

)

Especificaciones del producto

Marca:	Chief
Categoría:	Accesorio para proyector
Modelo:	SSB137
Color del producto:	Roestvrijstaal
Pantalla incorporada:	Nee
Ancho:	898 mm
Profundidad:	490 mm
Altura:	50 mm
Peso del embalaje:	27000 g
Ancho del embalaje:	970 mm
Empaquetadura en profundidad:	600 mm
Altura del embalaje:	570 mm
Amable:	Eiland
Potencia del motor:	350 W
Diámetro de la conexión de escape:	150 mm
Motor incluido:	Ja
Número de motores:	1
Material de la carcasa:	Roestvrijstaal
Capacidad máxima de extracción:	1000 m³/uur
Método de extracción:	Luchtafvoer
Número de lámparas:	6 gloeilamp(en)
Tipo de lámpara:	LED
Altura (mín.):	590 mm
Altura (máx.):	970 mm
Número de filtros:	1 stuk(s)
Número de velocidades:	4
Ubicación del escape:	Boven
voltaje-de-entrada-de-CA:	200-240 V
Frecuencia-de-entrada-de-CA:	50 Hz