Chief SSB8000 Manual de Usario

Chief Accesorio para proyector SSB8000

Lee a continuación 📖 el manual en español para Chief SSB8000 (1 páginas) en la categoría Accesorio para proyector. Esta guía fue útil para 5 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios

Descargar PDF

Página 1/1

I N S T A L L A T I O N I N S T R U C T I O N S

Milestone AV Technologies, and its affiliated corporations and subsidiaries (collectively, "Milestone"), intend to make this manual accurate and complete. However, Milestone makes

no claim that the information contained herein covers all details, conditions or variations, nor does it provide for every possible contingency in connection with the installation or use

of this product. The information contained in this document is subject to change without notice or obligation of any kind. Milestone makes no representation of warranty, expressed or

implied, regarding the information contained herein. Milestone assumes no responsibility for accuracy, completeness or sufficiency of the information contained in this document.

Chief Manufacturing, a products division of Milestone AV Technologies

8401 Eagle Creek Parkway, Savage, MN 55378

• P: 800.582.6480 / 952.894.6280 • F:877.894.6918 / 952.894.6918

8850-000216 Rev01

a Duchossois Group Company

05/09

SSB-8000, SSM-8000, SLB-8000 and SLM-8000 Interface Brackets

SSB-8000, SSM-8000, SLB-8000 and SLM-8000 Interface Brackets are designed for use with Chief® Series Projector Mounts. See the

specific installation instructions provided with the mount for additional installation information.

Unpack carton and verify kit contents. If any listed parts are missing, immediately contact a Chief Customer Service representative.

WARNING: IMPROPER INSTALLATION CAN LEAD TO EQUIPMENT FALLING CAUSING SERIOUS PERSONAL INJURY AND

DAMAGE TO EQUIPMENT! DO NOT substitute hardware. Use only hardware supplied by manufacturer!

Installation Instructions

WARNING: OVER TIGHTENING OF SCREWS CAN DAMAGE PARTS AND CAN LEAD TO SERIOUS PERSONAL INJURY AND

DAMAGE TO EQUPIMENT! DO NOT over tighten screws when installing interface brackets.

NOTE: Step 1 is only required when installing an SLB/SSB interface bracket. If an SLM/SSM bracket is being installed, proceed to step 2.

1. Screw thumb screws onto 10-24 x 5/8" Phillips pan head screws. DO NOT fully tighten thumb screws at this time.

2. Turn projector upside down on a flat surface.

3. Place the interface bracket onto the bottom of the projector and align the holes in the bracket with the threaded inserts in the bottom of the

projector.

4. Position M4 x 12mm mounting screws with washers into the mounting holes. Tighten all fasteners at this time, securing the bracket to the

projector.

NOTE: Security screws can be substituted when mounting interface bracket to projector by using the parts and installation instructions

in the All-Points Security Kit.

(1) Interface Bracket (3) Washer, Flat, M4

(4) 10-24 Thumb Nuts ** (3) Screw, Pan Head, M4 x 12mm

(1) All-Points Security Kit

**Only used when installing SLB/SSB interface brackets.

NOTE: Specific to SSB-style and SSM-style interface bracket installation, all appropriate screws come pre-installed as reflected in the

encircled locations above. DO NOT attempt to substitute and USE ONLY this pre-installed hardware for SSB-style and SSM-style

interface bracket installation.

SLB-8000 SLM-8000

(Note: SSB-style inte

)

(

)

Towards front of

projector

Towards front of

projector

Especificaciones del producto

Marca:	Chief
Categoría:	Accesorio para proyector
Modelo:	SSB8000
Color del producto:	Zwart
Peso del embalaje:	6500 g
Material de la carcasa:	Plastic, Rubber
Código de seguridad internacional (IP):	IP65
Sistemas operativos móviles compatibles:	Android 10, Android 6.0
Diagonal de la pantalla:	19 "
Resolución:	1280 x 1024 Pixels
Pantalla táctil:	Ja
Relación de aspecto original:	5:4
Incluye sistema operativo:	Android
red LAN:	Ja
Ángulo de visión, horizontal:	170 °
Ángulo de visión, vertical:	160 °
Cables suministrados:	AC
Forma de pantalla:	Flat
Relación de contraste típica:	1000:1
tecnología táctil:	Multi-touch
Brillo:	250 cd/m²
luz de fondo LED:	Ja
Número de puertos HDMI:	1
Número de puertos Ethernet LAN (RJ-45):	1
Altavoces incorporados:	Ja
Energía promedio:	12 W
Consumo de energía (en espera):	1 W
Número de hablantes:	2
tipo HD:	HD
Memoria interna:	2000 MB
Arquitectura del procesador:	AMR Cortex-A7
Entradas de audio:	1
Salida de audio:	1
Tipo de memoria interna:	DDR3
Versión del sistema operativo:	6
hdmi:	Ja
Tecnología de visualización:	LED
Tiempo de respuesta:	1.5 ms
Montaje VESA:	Ja
Pantalla antirreflejos:	Ja
Diámetro efectivo de la imagen:	379.3 x 304.1 mm
Profundidad (sin base):	43 mm
Altura (sin base):	364.5 mm
Ancho (sin base):	431.5 mm
Peso (sin base):	5500 g
Diámetro de la pantalla en centímetros.:	48.2 cm
AMD FreeSync:	Nee
NVIDIA G-SYNC:	Nee
Tipo de procesador:	Ja
LAN Ethernet, velocidades de transferencia de datos:	10, 100 Mbit/s
Número de puertos descendentes USB tipo A:	2
Tipo de retroiluminación:	LED
Adaptador de CA, voltaje de salida:	12 V
Concentrador USB incorporado:	Ja
Tecnología de pantalla táctil:	Projected capacitive-systeem
Wifi.:	Ja
voltaje-de-entrada-de-CA:	100 - 240 V
Consumo de energía (típico):	20 W
Temperatura de funcionamiento (TT):	-10 - 60 °C
Humedad relativa de funcionamiento (VV):	10 - 90 procent