Chief SSM121 Manual de Usario

Chief Accesorio para proyector SSM121

Lee a continuación 📖 el manual en español para Chief SSM121 (1 páginas) en la categoría Accesorio para proyector. Esta guía fue útil para 4 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios

Descargar PDF

Página 1/1

I N S T A L L A T I O N I N S T R U C T I O N S

Milestone AV Technologies, and its affiliated corporations and subsidiaries (collectively, "Milestone"), intend to make this manual accurate and complete. However, Milestone makes

no claim that the information contained herein covers all details, conditions or variations, nor does it provide for every possible contingency in connection with the installation or use

of this product. The information contained in this document is subject to change without notice or obligation of any kind. Milestone makes no representation of warranty, expressed or

implied, regarding the information contained herein. Milestone assumes no responsibility for accuracy, completeness or sufficiency of the information contained in this document.

Chief Manufacturing, a products division of Milestone AV Technologies

8401 Eagle Creek Parkway, Savage, MN 55378

• P: 800.582.6480 / 952.894.6280 • F:877.894.6918 / 952.894.6918

8850-000112 RevB

a Duchossois Group Company

05/09

SSB-121, SSM-121, SLB-121 and SLM-121 Interface Brackets

SSB-121, SSM-121, SLB-121 and SLM-121 Interface Brackets are designed for use with Chief® Series Projector Mounts. See the specific

installation instructions provided with the mount for additional installation information.

Unpack carton and verify kit contents. If any listed parts are missing, immediately contact a Chief Customer Service representative.

WARNING: IMPROPER INSTALLATION CAN LEAD TO EQUIPMENT FALLING CAUSING SERIOUS PERSONAL INJURY AND

DAMAGE TO EQUIPMENT! DO NOT substitute hardware. Use only hardware supplied by manufacturer!

Installation Instructions

WARNING: OVER TIGHTENING OF SCREWS CAN DAMAGE PARTS AND CAN LEAD TO SERIOUS PERSONAL INJURY AND

DAMAGE TO EQUIPMENT! DO NOT over tighten screws when installing Interface bracket.

NOTE: Step 1 is only required when installing an SLB/SSB interface bracket. If an SLM/SSM bracket is being installed, proceed to step 2.

1. Screw thumb screws onto 10-24 x 5/8" Phillips pan head screws. DO NOT fully tighten thumb screws at this time.

2. Turn projector upside down on a flat surface.

3. Place 1/2" spacers over threaded inserts in bottom of projector.

4. Place the interface bracket onto projector bottom and align mounting holes with the threaded inserts in projector.

5. Secure interface bracket to projector using the Phillips pan head screws and M4 x 20mm Phillips flat head screws with flat washers.

Tighten all fasteners at this time.

NOTE: Security screws can be substituted when mounting interface bracket to projector by using the parts and installation

instructions in the All-Points Security Kit.

(1) Interface Bracket (2) Screw, Phillips Pan Head, Machine, M4 x 20mm

(4) 10-24 Thumb Nuts ** (1) Screw, Phillips Flat Head, Machine, M4 x 20mm ****

(1) All-Points Security Kit (2) Washer, Flat, M4

(3) 1/2" x .194 x 1/2" Round Spacer ****

**Only used when installing SLB/SSB interface brackets. ****Used when mounting surface of projector is recessed.

NOTE: Specific to SSB-style and SSM-style interface bracket installation, all appropriate screws come pre-installed as reflected in the

encircled locations above. DO NOT attempt to substitute and USE ONLY this pre-installed hardware for SSB-style and SSM-style

interface bracket installation.

SLB-121 SLM-121

Towards front of

projector

Towards front of

projector

(Note: SSM-style interface bracket connection

are encircled)

(

Note: SSB-style interface bracket connections

)

Especificaciones del producto

Marca:	Chief
Categoría:	Accesorio para proyector
Modelo:	SSM121
Tipo de operación:	Buttons, Rotary
Color del producto:	Black, Orange, Silver
Peso.:	12500 g
Nivel de ruido:	88 dB
Consumo-anual-de-energía:	- kWu
Amable:	Cilinderstofzuiger
Fuente-de-alimentación:	AC
tipo de limpieza:	Droog en nat
Capacidad de polvo:	30 l
Potencia máxima de entrada:	3728 W
Interruptor encendido / apagado:	Ja
Tipo de contenedor de aspiradora:	Stofzak
El número de ruedas:	4 wiel(en)
tipo de tubo:	Vast
Manguera flexible:	Ja
Uso correcto:	Zakelijk
Ruedas de materiales:	Rubber
Número de ruedas giratorias de 360°:	2 wiel(en)
Longitud de la manguera:	3 m
voltaje-de-entrada-de-CA:	127 V
Frecuencia-de-entrada-de-CA:	60 Hz