Chief SSM220 Manual de Usario

Chief Accesorio para proyector SSM220

Lee a continuación 📖 el manual en español para Chief SSM220 (1 páginas) en la categoría Accesorio para proyector. Esta guía fue útil para 7 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios

Descargar PDF

Página 1/1

I N S T A L L A T I O N I N S T R U C T I O N S

Milestone AV Technologies, and its affiliated corporations and subsidiaries (collectively, "Milestone"), intend to make this manual accurate and complete. However, Milestone makes

no claim that the information contained herein covers all details, conditions or variations, nor does it provide for every possible contingency in connection with the installation or use

of this product. The information contained in this document is subject to change without notice or obligation of any kind. Milestone makes no representation of warranty, expressed or

implied, regarding the information contained herein. Milestone assumes no responsibility for accuracy, completeness or sufficiency of the information contained in this document.

Chief Manufacturing, a products division of Milestone AV Technologies

8401 Eagle Creek Parkway, Savage, MN 55378

• P: 800.582.6480 / 952.894.6280 • F:877.894.6918 / 952.894.6918

8802-000025 Rev02

a Duchossois Group Company

05/09

SSB-220, SSM-220, SLB-220 and SLM-220 Interface Brackets

SSB-220, SSM-220, SLB-220 and SLM-220 Interface Brackets are designed for use with Chief® Series Projector Mounts. See the specific

installation instructions provided with the mount for additional installation information.

Unpack carton and verify kit contents. If any listed parts are missing, immediately contact a Chief Customer Service representative.

WARNING: IMPROPER INSTALLATION CAN LEAD TO EQUIPMENT FALLING CAUSING SERIOUS PERSONAL INJURY AND

DAMAGE TO EQUIPMENT! DO NOT substitute hardware. Use only hardware supplied by manufacturer!

Installation Instructions

WARNING: OVER TIGHTENING OF SCREWS CAN DAMAGE PARTS AND CAN LEAD TO SERIOUS PERSONAL INJURY AND

DAMAGE TO EQUPIMENT! DO NOT over tighten screws when installing interface brackets.

NOTE: Step 1 is only required when installing an SLB/SSB interface bracket. If an SLM/SSM bracket is being installed, proceed to step 2.

1. Screw thumb screws onto 10-24 x 5/8" Phillips pan head screws. DO NOT fully tighten thumb screws at this time.

2. Turn projector upside down on a flat surface.

3. Place the interface bracket onto the bottom of the projector and align the holes in the bracket with the threaded inserts on the bottom of

the projector.

4. Position M4 x 10mm pan head mounting screws with M4 washers into the mounting holes. Tighten all fasteners at this time, securing the

bracket to the projector.

NOTE: Security screws can be substituted when mounting interface bracket to projector by using the parts and installation instructions

in the All-Points Security Kit.

(1) Interface Bracket (3) Washer, Flat, M4

(4) 10-24 Thumb Nuts ** (3) Screw, Phillips Pan Head, M4 x 10mm

(1) All-Points Security Kit (1) 5/32" Hex Key

**Only used when installing SLB/SSB interface brackets.

NOTE: Specific to SSB-style and SSM-style interface bracket installation, all appropriate screws come pre-installed as reflected in the

encircled locations above. DO NOT attempt to substitute and USE ONLY this pre-installed hardware for SSB-style and SSM-style

interface bracket installation.

SLB-220 SLM-220

(Note: SSB-style interface bracket connections

)

(Note: SSM-style interface

are encircled)

Towards front of

projector

Towards front of

projector

Especificaciones del producto

Marca:	Chief
Categoría:	Accesorio para proyector
Modelo:	SSM220
Color del producto:	Zwart
Consumo de energía (en espera):	0.5 W
subwoofer de potencia media:	250 W
Altavoz de graves con controlador de diámetro (imperial):	8 "
Tipo de subwoofer:	Actieve subwoofer
Rango de frecuencia del subwoofer:	18 - 150 Hz
Ancho del subwoofer:	380 mm
Altura del subwoofer:	442 mm
Profundidad del subwoofer:	435 mm
Peso del subwoofer:	24800 g
Potencia máxima del subwoofer:	400 W
Frecuencias de subwoofer cruzadas:	50 - 150 Hz