Chief SSM6100 Manual de Usario

Chief Accesorio para proyector SSM6100

Lee a continuación 📖 el manual en español para Chief SSM6100 (1 páginas) en la categoría Accesorio para proyector. Esta guía fue útil para 4 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios

Descargar PDF

Página 1/1

I N S T A L L A T I O N I N S T R U C T I O N S

Milestone AV Technologies, and its affiliated corporations and subsidiaries (collectively, "Milestone"), intend to make this manual accurate and complete. However, Milestone makes

no claim that the information contained herein covers all details, conditions or variations, nor does it provide for every possible contingency in connection with the installation or use

of this product. The information contained in this document is subject to change without notice or obligation of any kind. Milestone makes no representation of warranty, expressed or

implied, regarding the information contained herein. Milestone assumes no responsibility for accuracy, completeness or sufficiency of the information contained in this document.

Chief Manufacturing, a products division of Milestone AV Technologies

8401 Eagle Creek Parkway, Savage, MN 55378

• P: 800.582.6480 / 952.894.6280 • F:877.894.6918 / 952.894.6918

8802-002028 Rev01

a Duchossois Group Company

05/09

SSB-6100, SSM-6100, SLB-6100 and SLM-6100 Interface Brackets

SSB-6100, SSM-6100, SLB-6100 and SLM-6100 Interface Brackets are designed for use with Chief® Series Projector Mounts. See the

specific installation instructions provided with the mount for additional installation information.

Unpack carton and verify kit contents. If any listed parts are missing, immediately contact a Chief Customer Service representative.

WARNING: IMPROPER INSTALLATION CAN LEAD TO EQUIPMENT FALLING CAUSING SERIOUS PERSONAL INJURY AND

DAMAGE TO EQUIPMENT! DO NOT substitute hardware. Use only hardware supplied by manufacturer!

Installation Instructions

WARNING: OVER TIGHTENING OF SCREWS CAN DAMAGE PARTS AND CAN LEAD TO SERIOUS PERSONAL INJURY AND

DAMAGE TO EQUIPMENT! DO NOT over tighten screws when installing interface bracket.

NOTE: Step 1 is only required when installing an SLB/SSB interface bracket. If an SLM/SSM bracket is being installed, proceed to step 2.

1. Screw thumb screws onto 10-24 x 5/8" Phillips pan head screws. DO NOT fully tighten thumb screws at this time.

2. Turn projector upside down on a flat surface.

3. Place interface bracket on the projector.

4. Align the three mounting holes in the bracket with the three mounting inserts in the bottom of the projector.

5. Using the three M4 x 8mm screws with #4 washers, secure interface bracket to projector and tighten all fasteners at this time.

NOTE: Security screws can be substituted when mounting interface bracket to projector by using the parts and installation

instructions in the All-Points Security Kit.

(1) Interface Bracket (3) M4 x 8mm

(6) 10 - 24 Thumb Nuts** (1) All-Points Security Kit

(3) #4 Flat Washers

**Only used when installing SLB/SSB interface brackets.

NOTE: Specific to SSB-style and SSM-style interface bracket installation, all appropriate screws come pre-installed as reflected in the

encircled locations above. DO NOT attempt to substitute and USE ONLY this pre-installed hardware for SSB-style and SSM-style

interface bracket installation.

SLB-6100 SLM-6100

(Note: SSM-style interface bracket connections

)

(Note: SSB-style interface bracket connections

)

Towards front of

projector

Towards front of

projector

Especificaciones del producto

Marca:	Chief
Categoría:	Accesorio para proyector
Modelo:	SSM6100
Color del producto:	Beige, Brown
Ancho:	120 mm
Profundidad:	25 mm
Altura:	120 mm
Longitud del cable:	0.5 m
Amable:	Ventilator
Nivel de ruido (baja velocidad):	7.6 dB
Nivel de ruido (alta velocidad:	12.1 dB
Tipo de embalaje:	Doos
Certificación:	CE, RoHS
Suministro de red:	0.6 W
Material:	Vloeibaar-kristalpolymeer (LCP)
Certificados de sostenibilidad:	RoHS
Flujo de aire:	55.7 m³/uur
numero de fans:	1 ventilator(en)
Abarcando:	12 V
Velocidad de rotación (máx.):	1200 RPM
Incluyendo tornillos:	Ja
Velocidad de rotación (mín.):	450 RPM
Ubicación adecuada:	Computer behuizing
Procesadores compatibles:	Niet ondersteund
Código del Sistema Armonizado (SA):	84733080
Diámetro del ventilador:	120 mm
Actual (máx.):	0.05 A
Número de aspas del ventilador:	9
Zócalos de procesador compatibles:	Niet ondersteund
Presión de aire máxima:	0.82 mmH2O
tipo de acción:	Self-Stabilising Oil-pressure Bearing (SSO)
Conector del ventilador:	4-pin
Presión de aire mínima:	0.41 mmH2O