Chief SSM8010 Manual de Usario

Chief Accesorio para proyector SSM8010

Lee a continuación 📖 el manual en español para Chief SSM8010 (1 páginas) en la categoría Accesorio para proyector. Esta guía fue útil para 7 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios

Descargar PDF

Página 1/1

I N S T A L L A T I O N I N S T R U C T I O N S

Milestone AV Technologies, and its affiliated corporations and subsidiaries (collectively, "Milestone"), intend to make this manual accurate and complete. However, Milestone makes

no claim that the information contained herein covers all details, conditions or variations, nor does it provide for every possible contingency in connection with the installation or use

of this product. The information contained in this document is subject to change without notice or obligation of any kind. Milestone makes no representation of warranty, expressed or

implied, regarding the information contained herein. Milestone assumes no responsibility for accuracy, completeness or sufficiency of the information contained in this document.

Chief Manufacturing, a products division of Milestone AV Technologies

8401 Eagle Creek Parkway, Savage, MN 55378

• P: 800.582.6480 / 952.894.6280 • F:877.894.6918 / 952.894.6918

8850-000218 Rev01

a Duchossois Group Company

05/09

SSB-8010, SSM-8010, SLB-8010 and SLM-8010 Interface Brackets

SSB-8010, SSM-8010, SLB-8010 and SLM-8010 Interface Brackets are designed for use with Chief® Series Projector Mounts. See the

specific installation instructions provided with the mount for additional installation information.

Unpack carton and verify kit contents. If any listed parts are missing, immediately contact a Chief Customer Service representative.

WARNING: IMPROPER INSTALLATION CAN LEAD TO EQUIPMENT FALLING CAUSING SERIOUS PERSONAL INJURY AND

DAMAGE TO EQUIPMENT! DO NOT substitute hardware. Use only hardware supplied by manufacturer!

Installation Instructions

WARNING: OVER TIGHTENING OF SCREWS CAN DAMAGE PARTS AND CAN LEAD TO SERIOUS PERSONAL INJURY AND

DAMAGE TO EQUIPMENT! DO NOT over tighten screws when installing interface bracket.

NOTE: Step 1 is only required when installing an SLB/SSB interface bracket. If an SLM/SSM bracket is being installed, proceed to step 2.

1. Screw thumb screws onto 10 - 24 x 5/8” Phillips pan head screws. DO NOT fully tighten thumb screws at this time.

2. Turn projector upside down on a flat surface.

3. Place the three nylon spacers onto the three threaded inserts in the bottom of the projector.

4. Place the interface bracket onto the three nylon spacers on the bottom of the projector, and align the three mounting holes in the bracket

with the three nylon spacers.

5. Using the three M6 x 12mm screws, secure interface bracket to projector and tighten all fasteners at this time.

NOTE: Security screws can be substituted when mounting interface bracket to projector by using the parts and installation

instructions in the All-Points Security Kit.

(1) Interface Bracket (3) M6 x 12mm Phillips Pan Screws

(4) 10 - 24 Thumb Nuts** (3) 1/2” x .320 x 1/4” Nylon Spacers

(1) All-Points Security Kit

**Only used when installing SLB/SSB interface brackets.

NOTE: Specific to SSB-style and SSM-style interface bracket installation, all appropriate screws come pre-installed as reflected in the

encircled locations above. DO NOT attempt to substitute and USE ONLY this pre-installed hardware for SSB-style and SSM-style

interface bracket installation.

SLB-8010

SLM-8010

(Note: SSM-style interface bracket connection

)

(Note: SSB-style interface bracket connections

)

Towards front of

projector

Towards front of

projector

Especificaciones del producto

Marca:	Chief
Categoría:	Accesorio para proyector
Modelo:	SSM8010
Color del producto:	Zwart
Peso.:	180 g
Peso del embalaje:	450 g
Manual de usuario:	Ja
Indicadores LED:	Status, Y
País de origen:	Verenigde Staten
Número de puertos Ethernet LAN (RJ-45):	2
Certificación:	CE
Incluye cable de alimentación:	Ja
Conexión para adaptador de red:	Ja
LAN Ethernet, velocidades de transferencia de datos:	10, 100 Mbit/s
Estándar de red:	IEEE 802.3af, IEEE 802.3at
Temperatura de almacenamiento:	-40 - 75 °C
Rango de temperatura de funcionamiento:	-4 - 120.2 °F
Tipo de interfaz Ethernet:	Fast Ethernet
Altura operativa:	-304 - 2000 m
Alimentación a través de Ethernet (PoE):	Ja
Distancia máxima:	500 m
Dimensiones (Ancho x Fondo x Alto):	88.89 x 88.89 x 25.4 mm
Temperatura de funcionamiento (TT):	-20 - 49 °C
Humedad relativa de funcionamiento (VV):	0 - 85 procent
Número-de-productos-incluidos:	2 stuk(s)
Tipos de cables compatibles:	Cat5e
Sistema dúplex:	Volledig
Alimentación por puerto Alimentación a través de Ethernet (PoE):	30 W
Alimentación-a-través-de-Ethernet-(PoE):	- V