Chord IEM16 Manual de Usario

Chord No categorizado IEM16

Lee a continuación 📖 el manual en español para Chord IEM16 (6 páginas) en la categoría No categorizado. Esta guía fue útil para 2 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios

Descargar PDF

Página 1/6

IEM16

In-Ear Monitoring System

Item ref: 171.892UK

User Manual

Version 1.1

Caution: Please read this manual carefully before operating

Damage caused by misuse is not covered by the warranty

171.892UK User Manual

Introduction

Thank you for choosing this Chord IEM16 UHF in-ear monitoring system. This professional system provides

high quality wireless foldback for accurate audio ference with full freedom of movement. Please read this re

manual before using this equipment in order to avoid damage through incorrect operation and to get the best

performance from your purchase.

Contents:

Please take care when unpacking this product. Inspect for any damage and ensure you have the following

components…

• UHF wireless transmitter

• Detachable BNC antenna

• UHF bodypack receiver

• Dual driver in-ear monitor headphones

• 19” rack-mounting kit

• Mains power adapter

• 2 x AA batteries

Warning

To prevent the risk of fire or electric shock, do not expose any of the components to rain or moisture.

If liquids are spilled on any component, stop using immediately, allow unit to dry out and have checked by

qualified personnel before further use.

Avoid impact or heavy vibration to any of the components or over-stretching of the cables.

No user serviceable parts inside transmitter or receiver - refer servicing to qualified service personnel.

Safety

• Ensure that the correct adapter is used with adequate current rating and that the mains voltage is as

stated on the adapter.

• Avoid ingress of water or particles into the transmitter or receiver

• Use alkaline or NiMH batteries in the bodypack receiver and remove if unused for long periods.

• Observe the correct polarity when replacing batteries

Placement

• Ensure good line-of-sight contact between transmitter and receiver for best reception

• Keep all components out of direct sunlight and away from heat sources.

• Do not place heavy objects on top of the receiver or transmitt er

• If rack-mounting, ensure adequate support and connection access for the transmitter unit.

• Keep the transmitter and receiver away from damp or dusty environments.

Cleaning

• Use a soft cloth with a neutral detergent to clean the body of th transmitter /or receiver. e and

• To avoid damage, do not use solvents to clean the components

• Sterile wipes may be used on in-ear headphones – be sure to avoid ingress of fluids into the nozzles

171.892UK User Manual

Transmitter front panel

1. Power button

2. Up, Down, Set buttons

3. Input Level control

4. 6.3mm stereo headphone jack

5. Headphone volume control

Transmitter rear panel

6. DC power inlet

7. Left & Right XLR/jack inputs

8. Pad level switch

9. BNC antenna connection

Bodypack receiver

10. 3.5mm stereo headphone jack output

11. Volume and on/off control

12. Anten na

13. LED indicator

14. LCD display

15. Control and battery compartment

Bodypack controls

Setting up

Connect the monitor mix signal from a mixing console to the transmitter unit via the left and right

XLR/jack inputs on the rear panel. The PAD switc (8) cuts the signal by -12dB for high level input. h

Connect the supplied antenna to the rear BNC connection and extend fully. Connect the supplied DC

adaptor to the DC inlet on the transmitter unit and a mains socket, observing the correct voltage.

Flip open the front cover of the bodypack receiver and insert 2 x AA batteries (supplied), whilst

observing the correct polarity. Making sure the Volume/On/Off rotary control (11) on the bodypack is

turned off, connect the in-ear monitor headphones to the 3.5mm jack output (10).

ESC

Press to exit current function



Press to increase parameter



Press to decrease parameter

SET

Press to enter settings

Especificaciones del producto

Marca:	Chord
Categoría:	No categorizado
Modelo:	IEM16
Peso.:	9 g
Ancho:	22 mm
Profundidad:	20.8 mm
Altura:	11 mm
Peso del embalaje:	20 g
Ancho del embalaje:	74 mm
Empaquetadura en profundidad:	185 mm
Altura del embalaje:	21 mm
Bluetooth:	Ja
Tipo de embalaje:	Doos
Versión Bluetooth:	5.1+EDR
Tecnología de conectividad:	Draadloos
Interfaz:	Bluetooth
Conecta y reproduce:	Ja
Nivel de ganancia de antena (máx.):	2 dBi
Interno:	Nee
Guía de Instalación Rápida:	Ja
Interfaz de host:	USB
Velocidad máxima de transferencia de datos:	3 Mbit/s
Distancia máxima:	100 m
Antena:	Ja
Componente para:	PC/Laptop
Altura del paquete principal (exterior):	200 mm
Ancho del embalaje principal (exterior):	380 mm
Peso bruto del embalaje principal (exterior):	8250 g
Longitud del paquete principal (exterior):	420 mm
Cantidad por caja principal (exterior):	100 stuk(s)
Diseño de antena:	Extern
Factor de vorm del conector USB:	Recht