Clarity D613HS Manual de Usario
Lee a continuación 📖 el manual en español para Clarity D613HS (2 páginas) en la categoría telefono. Esta guía fue útil para 7 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios
Página 1/2
1. Connect the DC adapter cord into the DC 6V 300mA port on
the bottom of the base; plug the adapter into your wall outlet. See
Figure 1.
2. Slide open the battery compartment door and connect the
rechargeable battery into the battery compartment. See Figure 2.
3. Put the handset on the base to charge for at least 24 hours
before first use. Subsequent charging time should be 6-8 hours a day.
INSTALLING YOUR D613HS
USER GUIDE
© 2009 Clarity, a division of Plantronics, Inc. All rights reserved.
Amplifying your life, Clarity, the amplification device, Clarity and
the amplification device combined, Clarity, D613HS, D603, D613,
D613C, Clarity Power are trademarks or registered trademarks of
Plantronics, Inc.
Rev. E (9-09)
CONTENTS & PARTS CHECKLIST
User guide
Handset
DC adapter
6V 300mA
Charger
Your package includes all the items as shown here. If there is
anything missing, please contact our Customer Care Department
immediately.
NOTE: PLEASE RETAIN A COPY OF PROOF OF PURCHASE
FOR YOUR RECORDS.
Battery Performance
The battery icon will blink on the menu screen when the battery is
low. A fully charged battery will provide an estimated 10 hours of
talk time and 100 hours of standby time.
To keep your battery pack in the best condition, leave the handset
off the base for a few hours at a time. Running the battery pack
down at least once will help it last as long as possible. The charge
capacity of rechargeable battery pack will reduce with time as it
wears out, giving the handset less talk/standby time. Eventually it will
need to be replaced.
Note: Battery pack and handset may become warm during charging.
This is normal.
Battery
pack
Electric Wall Outlet
(insert power adapter)
Figure 1
Figure 2
ADDITIONAL HANDSETS
To register your additional handset
The original handset is pre-registered for use. Up to 5 handsets
can be registered to one base station. Additional handsets must
be registered to the base before you can use them.
1. Place the unregistered handset on the charger.
2. Press and hold the FIND button for 4 seconds on the base.
3. Release the FIND button once the IN USE light starts to flash.
4. A confirmation tone will sound when registration is successful.
Handset X is displayed where X denotes the number of handsets.
The phone will then go back to idle.
De-register All Handsets
1. Unplug the power from the base.
2. Press and hold the FIND button on the base for 10 seconds.
3. Plug back in the power of the base.
4. Release once the IN USE light starts to flash rapidly.
5. Within 2 seconds, press and release the FIND button on the
base again. This will de-register all handsets. The IN USE light on
the base will be OFF and NOT REGISTERED will display on each
handset menu screen.
INTRODUCTION
The D613HS is an expandable handset that is
compatible with the Clarity D613, D603 and D613C.
The D613, D603 and D613C will support up to 5
handsets.
Additional information can be found in the D613/D603/
D613C User Guides.
SPECIFICATIONS
Amplified dB Level: 30dB
Dimensions
Handset Size: 7” x 2 ” x 1 1/4” (H x W x D)
Base Size: 2 1/2” x 3 1/2” x 4” (H x W x D)
Weight
Handset Weight: 3.14 ounces
Charger Weight: 4 ounces
Power Requirements
DC Adapter: 6V, 300 mA
Battery: 2.4V 550mAh Ni-MH
TROUBLESHOOTING
Registration
Unable to register another handset
1. If there is a total of 5 handsets registered, the maximum has
been reached.
2. The display shows NOT REGISTERED. You must de-register a
handset in order to register a new one.
Privacy of communications may not be ensured when using this phone.
Warning: To maintain the compliance with the FCC’s RF exposure
guideline, place the base unit at least 20 cm from nearby persons.
For body worn operation, this handset has been tested and meets the
FCC RF exposure guidelines when used with the Clarity accessories
supplied or designated for this product. Use of other accessores may
not ensure compliance with FCC RF exposure guidelines.
When using your telephone equipment, basic safety precautions should
always be followed to reduce the risk of fire, electric shock and injury to
persons including the following:
1. Read and understand all instructions.
2. Follow all warnings and instructions marked on the telephone.
3. Do not use this telephone near a bathtub, wash basin, kitchen sink or
laundry tub, in a wet basement, near a swimming pool or any where else
there is water.
4. Avoid using a telephone (other than a cordless type) during a storm.
There may be a remote risk of electrical shock from lightning.
5. Do not use the telephone to report a gas leak in the vicinity of the
leak.
6. Unplug this telephone from the wall outlets before cleaning. Do not
use liquid cleaners or aerosol cleaners on the telephone. Use a damp
cloth for cleaning.
7. Place this telephone on a stable surface. Serious damage and/or injury
may result if the telephone falls.
8. Do not cover the slots and openings on this telephone. This telephone
should never be placed near or over a radiator or heat register. This
telephone should not be placed in a built-in installation unless proper
ventilation is provided.
9. Operate this telephone using the electrical voltage as stated on the
base unit or the owner’s manual. If you are not sure of the voltage in
your home, consult your dealer or local power company.
10. Do not place anything on the power cord. Install the telephone
where no one will step or trip on the cord.
11. Do not overload wall outlets or extension cords as this can increase
the risk of fire or electrical shock.
12. Never push any objects through the slots in the telephone. They can
touch dangerous voltage points or short out parts that could result in
a risk of fire or electrical shock. Never spill liquid of any kind on the
telephone.
13. To reduce the risk of electrical shock, do not take this phone apart.
Opening or removing covers may expose you to dangerous voltages
or other risks. Incorrect reassembly can cause electric shock when the
appliance is subsequently used.
14. Unplug this product from the wall outlet and refer servicing to
the manufacturer under the following conditions: when the power
supply cord or plug is frayed or damaged; if liquid has been spilled into
the product; if the telephone has been exposed to rain or water; if
the telephone has been dropped or the case has been damaged; if the
telephone exhibits a distinct change in performance; if the telephone
does not operate normally by following the operating instructions.
Adjust only those controls that are covered by the operating
instructions. Improper adjustment may require extensive work by a
qualified technician to restore the telephone to normal operation;
15. Never install telephone wiring during a lightning storm.
16. Never install telephone jacks in wet locations unless the jack is
specifically designed for wet locations.
17. Never touch uninsulated telephone wires or terminals unless the tele
phone line has been disconnected at the network interface.
18. Use caution when installing or modifying telephone lines.
IMPORTANT SAFETY
INSTRUCTIONS
BATTERY SAFETY INFORMATION
Dispose of used batteries according to the instructions.
1. Do not dispose of the battery in a fire as it may explode. Check
with local codes for possible special disposal instructions.
2. Do not open or mutilate the battery. Released electrolyte is
corrosive and may cause damage to the eyes and skin. It may be
toxic if swallowed.
3. Exercise care in handling batteries in order not to short the
battery with conducting materials such as rings, bracelets and keys.
The battery or conduction material may overheat and cause burns.
User guide
D613HS™
Amplified Cordless DECT
Expandable Handset
(Compatible only with
Clarity D603, D613 and D613C)
Clarity, a Division of Plantronics, Inc.
4289 Bonny Oaks Drive, Suite 106
Chattanooga, TN 37406
1-800-426-3738
www.clarityproducts.com
TM
D613HS
REGULATORY COMPLIANCE
Part 68 of FCC Rules Information
a) This equipment complies with Part 68 of the FCC rules and
the requirements adopted by the ACTA. On the bottom of this
equipment is a label that contains, among other information,
a product identifier in the format US:AAAEQ##TXXXX. If
requested, this number must be provided to the telephone
company.
b) A plug and jack used to connect this equipment to the
premises wiring and telephone network must comply with
the applicable FCC Part 68 rules and requirements adopted
by the ACTA. A compliant telephone cord and modular plug,
RJ11C USOC, is provided with this product. It is designed to be
connected to a compatible modular jack that is also compliant.
See installation instructions for details.
c) The REN is used to determine the number of devices that
may be connected to a telephone line. Excessive RENs on a
telephone line may result in the devices not ringing in response
to an incoming call. In most but not all areas, the sum of RENs
should not exceed five (5.0). To be certain of the number of
devices that may be connected to a line, as determined by the
total RENs, contact the local telephone company. For products
approved after July 23, 2001, the REN for this product is part of
the product identifier that has the format US:AAAEQ##TXXXX.
The digits represented by ## are the REN without a decimal
point (e.g., 03 is a REN of 0.3). For earlier products, the REN is
separately shown on the label.
d) If this telephone equipment causes harm to the telephone
network, the telephone company will notify you in advance that
temporary discontinuance of service may be required. But if
advance notice isn’t practical, the telephone company will notify
the customer as soon as possible. Also, you will be advised of
your right to file a complaint with the FCC if you believe it is
necessary.
e) The telephone company may make changes in its facilities,
equipment, operations or procedures that could affect the
operation of the equipment. If this happens the telephone
company will provide advance notice in order for you to make
necessary modifications to maintain uninterrupted service.
f) If trouble is experienced with this telephone equipment, for
repair or warranty information, please contact Clarity, 1-800-426-
3738. If the equipment is causing harm to the telephone network,
the telephone company may request that you disconnect the
equipment until the problem is resolved.
g) This telephone equipment is not intended to be repaired and
it contains no repairable parts. Opening the equipment or any
attempt to perform repairs will void the warranty. For service or
repairs, call 1-800-426-3738.
h) Connection to party line service is subject to state tariffs.
Contact the state public utility commission, public service
commission or corporation commission for information.
Part 68 of FCC Rules Information
i) If your home has specially wired alarm equipment connected
to the telephone line, ensure the installation of this telephone
equipment does not disable your alarm equipment. If you have
questions about what will disable alarm equipment, consult your
telephone company or a qualified installer.
j) This telephone equipment is hearing aid compatible.
Customer-Owned Coin/Credit Card Phones:
To comply with state tariffs, the telephone company must be given
notification prior to connection. In some states, the state public
utility commission, public service commission or corporation
commission must give prior approval of connection.
Part 15 of FCC Rules Information
This device complies with Part 15 of the FCC Rules. Operation
is subject to the following two conditions: (1) This device may
not cause harmful interference, and (2) this device must accept
any interference received, including interference that may cause
undesired operation.
Your equipment has been tested and found to comply with the limits
of a Class B digital device, pursuant to Part 15 of FCC rules. These
limits are designed to provide reasonable protection against harmful
interference in residential installation.
This equipment generates, uses and can radiate radio frequency
energy and, if not installed and used in accordance with
the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference
will not occur in a particular installation; if this equipment does
cause harmful interference to radio or television reception, which
can be determined by turning the equipment off and on, you
are encouraged to try to correct the interference by one of the
following measures:
1. Where it can be done safely, reorient the receiving television or
radio antenna.
2. To the extent possible, relocate the television, radio or other
receiver with respect to the telephone equipment. (This increases
the separation between the telephone equipment and the receiver.)
3. Connect the telephone equipment into an outlet on a circuit
different from that to which the television, radio, or other receiver is
connected.
4. Consult the dealer or an experienced Radio/TV Technician for
help.
WARNING: Changes or modifications not expressly approved by
the manufacturer responsible for compliance could void the user’s
authority to operate the equipment.
Industry Canada Technical Specifications
This product meets the applicable Industry Canada
technical specifications.
Before installing this equipment, users should ensure that it
is permissible to be connected to the facilities of the local
telecommunications company. The equipment must also be installed
using an acceptable method of connection. In some cases, the
company’s inside wiring associated with a single line individual
service may be extended by means of a certified connector
assembly (telephone extension cord). The customer should be
aware that compliance with the above conditions may not prevent
degradation of service in some situations. Repairs to certified
equipment should be made by an authorized Canadian maintenance
facility designated by the supplier.
Any repairs or alterations made by the user to this equipment, or
equipment malfunctions, may give the telecommunications company
cause to request the user to disconnect the equipment.
Users should ensure for their own protection that the electrical
ground connections of the power utility, telephone lines and
internal metallic water pipe system, if present, are connected
together. This precaution may be particularly important in rural
areas.
WARNING: Users should not attempt to make such connections
themselves, but should contact the appropriate electrical inspection
authority, or electrician, as appropriate.
The Ringer Equivalence Number is an indication of the maximum
number of terminals allowed to be connected to a telephone
interface. The termination on an interface may consist of any
combination of devices subject only to the requirement that the
sum of the Ringer Equivalence Numbers of all the devices does not
exceed five.
This Class B digital apparatus complies with Canadian ICES-
003.
(The term “IC:” before the certification/registration number only
signifies that the Industry Canada technical specifications were
met.)
To obtain warranty service, please prepay shipment and return
the unit to the appropriate facility listed below.
Clarity Service Center Plantronics Service Centre
4289 Bonny Oaks Drive, Suite 106 2732 Etienne Lenoir
Chattanooga, Tennessee 37406 Laval, Quebec H7R 0A3
Tel: (423) 629-3500 or Tel: (800) 540-8363
(800) 426-3738 or (514) 956-8363
Fax: (423) 622-7646 Fax: (514) 956-1825
or (800) 325-8871
Please use the original container, or pack the unit(s) in a sturdy
carton with sufficient packing material to prevent damage. Include
the following information:
A proof-of-purchase indicating model number and date of
purchase;
Bill-to address;
Ship-to address;
Number and description of units shipped;
Name and telephone number of person to call, should contact
be necessary;
Reason for return and description of the problem.
Damage occurring during shipment is deemed the responsibility
of the carrier, and claims should be made directly with the carrier.
The following warranty and service information applies only
to products purchased and used in the U.S. and Canada. For
warranty information in other countries, please contact your local
retailer or distributor.
Limited Warranty: Clarity, a division of Plantronics, Inc.
(“Clarity”) warrants to the original consumer purchaser that,
except for limitations and exclusions set forth below, this
product shall be free from defects in materials and workmanship
for a period of one (1) year from the date of original purchase
(“Warranty Period”). The obligation of Clarity under this
warranty shall be at Clarity’s option, without charge, of any part
or unit that proves to be defective in material or workmanship
during the Warranty Period.
Exclusions from Warranty: This warranty applies only to
defects in factory materials and factory workmanship. Any
condition caused by accident, abuse, misuse or improper
operation, violation of instructions furnished by Clarity,
destruction or alteration, improper electrical voltages or currents,
or repair or maintenance attempted by anyone other than Clarity
or an authorized service center, is not a defect covered by this
warranty. Telephone companies manufacture different types of
equipment and Clarity does not warrant that its equipment is
compatible with the equipment of a particular phone company.
Implied Warranties: Under state law, you may be entitled
to the benefit of certain implied warranties. These implied
warranties will continue in force only during the warranty
period. Some states do allow limitations on how long an implied
warranty lasts, so the above limitation may not apply to you.
Incidental or Consequential Damages: Neither Clarity nor
your retailer dealer or selling distributors has nay responsibility
for any incidental or consequential damages including without
limitation, commercial loss or profit, or for any incidental expenses,
expenses, loss of time, or inconvenience. Some states do not allow
exclusion or limitation of incidental or consequential damage, so
the above limitation or exclusion may not apply to you.
Other Legal Rights: This warranty gives you specific legal rights
and you may also have other rights which vary from state to state.
WARRANTY SERVICE INFORMATION
REGULATORY COMPLIANCE REGULATORY COMPLIANCE
PARTY RESPONSIBLE FOR
REGULATORY COMPLIANCE
Clarity, A Division of Plantronics, Inc.
4289 Bonny Oaks Drive, Suite 106
Chattanooga, TN 37406
Phone: 1-800-426-3738
WARRANTY SERVICE INFORMATION
PRINTED IN CHINA
Especificaciones del producto
| Marca: | Clarity |
| Categoría: | telefono |
| Modelo: | D613HS |
¿Necesitas ayuda?
Si necesitas ayuda con Clarity D613HS haz una pregunta a continuación y otros usuarios te responderán
telefono Clarity Manuales
15 Septiembre 2024
15 Septiembre 2024
15 Septiembre 2024
15 Septiembre 2024
15 Septiembre 2024
15 Septiembre 2024
15 Septiembre 2024
15 Septiembre 2024
15 Septiembre 2024
15 Septiembre 2024
telefono Manuales
- telefono Samsung
- telefono Xiaomi
- telefono LG
- telefono AEG
- telefono Huawei
- telefono Philips
- telefono Panasonic
- telefono Fysic
- telefono Grundig
- telefono Gigaset
- telefono JBL
- telefono Motorola
- telefono Medion
- telefono Nokia
- telefono Siemens
- telefono Topcom
- telefono VTech
- telefono Yealink
- telefono Alcatel
- telefono Aastra
- telefono Apple
- telefono Amplicomms
- telefono Airlive
- telefono AGFEO
- telefono Amplicom
- telefono Alcatel-Lucent
- telefono Ascom
- telefono Prestigio
- telefono Proximus
- telefono Telefunken
- telefono Thomson
- telefono Pyle
- telefono Asus
- telefono BeeWi
- telefono Renkforce
- telefono RCA
- telefono Logik
- telefono Trust
- telefono Doro
- telefono Sagem
- telefono Avaya
- telefono Denver
- telefono Roland
- telefono ZTE
- telefono Hama
- telefono Sunstech
- telefono Bang And Olufsen
- telefono Sennheiser
- telefono Sylvania
- telefono Nec
- telefono Swissvoice
- telefono Marquant
- telefono Fenton
- telefono Cisco
- telefono AVerMedia
- telefono Krüger And Matz
- telefono Binatone
- telefono Blackberry
- telefono Engenius
- telefono Plantronics
- telefono KPN
- telefono Envivo
- telefono Belgacom
- telefono Olympia
- telefono Linksys
- telefono Auerswald
- telefono Audioline
- telefono Uniden
- telefono Netgear
- telefono BT
- telefono Profoon
- telefono ArtDio
- telefono Valcom
- telefono Switel
- telefono Jabra
- telefono ZyXEL
- telefono CAT
- telefono AT&T
- telefono Trevi
- telefono D-Link
- telefono Essentiel B
- telefono Logicom
- telefono Peaq
- telefono Emporia
- telefono Marmitek
- telefono Kyocera
- telefono XD Enjoy
- telefono MT Logic
- telefono Trendnet
- telefono OnePlus
- telefono Mitel
- telefono Geemarc
- telefono MyPhone
- telefono Fanvil
- telefono Oppo
- telefono Spectralink
- telefono VXi
- telefono Tiptel
- telefono SPC
- telefono Snom
- telefono Premier
- telefono Grandstream
- telefono Gamdias
- telefono Polycom
- telefono Realme
- telefono Primare
- telefono Oregon Scientific
- telefono SMC
- telefono Maxcom
- telefono Legrand
- telefono Digium
- telefono Davolink
- telefono EVOLVEO
- telefono Lindy
- telefono On-Q
- telefono Canyon
- telefono Lewitt
- telefono Vogtec
- telefono Cubot
- telefono CyberData Systems
- telefono Cortelco
- telefono Bintec-elmeg
- telefono CTA Digital
- telefono Wantec
- telefono Neat
- telefono Algo
- telefono Future Call
- telefono 4family
- telefono Tador
- telefono CSL
- telefono Tecdesk
- telefono Dnake
- telefono Liam&Daan
- telefono FlyingVoice
Últimos telefono Manuales
27 Octubre 2024
26 Octubre 2024
26 Octubre 2024
23 Octubre 2024
21 Octubre 2024
19 Octubre 2024
18 Octubre 2024
18 Octubre 2024
17 Octubre 2024
17 Octubre 2024