Cocraft PRO ML10-DB Manual de Usario

Cocraft máquina de aserrar PRO ML10-DB

Lee a continuación 📖 el manual en español para Cocraft PRO ML10-DB (64 páginas) en la categoría máquina de aserrar. Esta guía fue útil para 8 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios

Descargar PDF
Página 1/64
ENGLISHSVENSKANORSKSUOMIDEUTSCH
Important!
Read the entire instruction manual
carefully and make sure that you fully
understand it before you use the
equipment. Keep the manual for future
reference.
Viktig information:
Läs hela bruksanvisningen noggrant och
försäkra dig om att du har förstått den
innan du använder utrustningen. Spara
bruksanvisningen för framtida bruk.
Viktig informasjon:
Les disse anvisningene nøye og forsikre
deg om at du forstår dem, før du tar
produktet i bruk. Ta vare på anvisningene
for seinere bruk.
Tärkeää tietoa:
Lue nämä ohjeet huolellisesti ja varmista
että olet ymmärtänyt ne, ennen kuin
alat käyttää laitetta. Säilytä ohjeet
myöhempää tarvetta varten.
Wichtiger Hinweis:
Vor Inbetriebnahme die komplette
Bedienungsanleitung sorgfältig
durchlesen und aufbewahren.
P R O E D I T I O N
Ver. 20170403
Original instructions
Bruksanvisning i original
Originalbruksanvisning
Alkuperäinen käyttöohje
Original Bedienungsanleitung
Art.no Model
40-9931 HM1028R
PRO ML10-DB
SLIDING MITRE SAW 1200 W
40-9931
KAP- OCH GERINGSSÅG
KAPP- OG GJÆRESAG
KATKAISU- JA JIIRISAHA
KAPP- UND GEHRUNGSSÄGE
ENGLISH
2
Sliding Mitre Saw
Art.no 40-9931 Mode HM1028R
Please read theentire instruction manual before using theproduct and then save
it for future reference. We reserve theright for any errors in text or images and any
necessary changes made to technical data. In theevent of technical problems or other
queries, please contact our Customer Services (see address details on theback).
Safety
Warning!
When using this tool all basic safety precautions must be followed to avoid the risk of
fire, electrocution and personal injury. Read these instructions carefully before using
the product and keep them for future reference.
• Keep the working area tidy. Cluttered surfaces and benches invite accidents.
• Take stock of your working environment. Do not expose the tool to rain.
• Do not use the tool in moist or wet areas. Keep the working area well lit. Never
operate the tool near flammable liquid or gas.
• Avoid body contact with earthed objects, such as pipes, Avoid electric shocks.
radiators, ovens or refrigerators.
• Do not allow anyone not involved in the Keep other people at a safe distance.
work process to touch the tool or its electric cable, especially children. Keep all
bystanders at a distance.
• When your tools are not in use, keep them in a Store the tool in a safe place.
locked, dry area, away from children.
• The correct feed rate makes the work better and safer.Do not overload the tool.
• Do not try to use small tools to perform jobs Use the correct tool for the job.
requiring more powerful tools. Do not use a tool for a purpose for which it was not
designed, e.g. using a circular saw for lopping branches off trees.
• Do not wear loose-fitting clothing or jewellery; they could Wear suitable clothing.
be caught in moving parts. Non-slip shoes are recommended for outdoor work.
• Wear a hairnet or similar if you have long hair.
• Always use safetywear. Wear safety glasses. Use a dust mask or dust filter when
working in dusty environments.
• If the tool is equipped with or connected to a dust extractor/Use dust extractors.
collector, make sure that it is turned on and used correctly.
• Do not jerk the lead, grip the plug itself when discon-Do not abuse the lead.
necting the power. Make sure that the mains lead does not come into contact with
heat, oil, or sharp edges.
ENGLISH
3
• If possible use vices or clamps to hold the work-Firmly secure the workpiece.
piece in place. This is much safer than holding the workpiece in one hand.
• Make sure that you stand steady and balanced all times.Do not overreach.
• Make sure that they are clean and that the edges are sharp Look after you tools.
for maximum effect and best results. Follow the manual’s recommendations regar-
ding lubrication and replacement of accessories. Inspect the mains lead regularly.
If it is damaged it should be replaced by a qualified service technician. Inspect all
leads and cables regularly to check for any damage. Make sure that the machine’s
handles and controls are clean, dry and free from oil and grease.
• Turn the power off. Pull out the plug and push in the emergency stop button
before servicing or changing any blades, drill bits, cutters or sanding discs.
• Make a habit of checking to make sure Remove all spanners and repair tools.
that the machine is free of all spanners and tools before turning the power on.
• Do not walk around with your finger on the trigger of a Avoid accidental starts.
power tool if it is plugged in. Make sure that the on/off switch is set to OFF before
plugging in any power tool.
• If you use extension leads outdoors, only use Use the correct extension leads.
those designed for outdoor use. Only use extension leads with thick enough dia-
meter core wires and roll out the whole lead.
• Think before carrying out any task, so that Use common sense and be careful.
it is carried out safely. Never operate machines/power tools when you are tired or
under the influence of medicine.
• Check the following before turning the tool on:
- That all guards and other parts are whole and in working order.
- That moving parts are free and correctly aligned.
- That no moving parts can get caught.
- That there are no visible defects.
- Other factors that can influence work execution.
• The use of non-recommended accesso-Use only recommended accessories.
ries can cause accidents and personal injury.
• Should only be repaired by a qualified technician. This tool conforms to current
safety requirements. Repairs to the tool should only be carried out by a tradesman
using original spares; otherwise the tool could cause accidents and personal injury.

Especificaciones del producto

Marca: Cocraft
Categoría: máquina de aserrar
Modelo: PRO ML10-DB

¿Necesitas ayuda?

Si necesitas ayuda con Cocraft PRO ML10-DB haz una pregunta a continuación y otros usuarios te responderán


máquina de aserrar Cocraft Manuales

Cocraft

Cocraft HB 10-L Manual de Usario

9 Septiembre 2024
Cocraft

Cocraft PRO ML10-DB Manual de Usario

19 Agosto 2024
Cocraft

Cocraft HC 1400 Manual de Usario

19 Agosto 2024

máquina de aserrar Manuales

Últimos máquina de aserrar Manuales

Hikoki

Hikoki C 6BU3 Manual de Usario

27 Octubre 2024
Dedra

Dedra DED7060 Manual de Usario

27 Octubre 2024
Einhell

Einhell KGS 190 Manual de Usario

27 Octubre 2024
Sun Joe

Sun Joe SWJ599E Manual de Usario

27 Octubre 2024
McCulloch

McCulloch CSE1935S Manual de Usario

27 Octubre 2024
Hikoki

Hikoki C10FSB Manual de Usario

27 Octubre 2024
Metabo

Metabo STA 18 LTX 150 BL Manual de Usario

26 Octubre 2024
Craftsman

Craftsman 917.377662 Manual de Usario

26 Octubre 2024
Maruyama

Maruyama MCV51 Manual de Usario

26 Octubre 2024
Powerplus

Powerplus POWX53300T Manual de Usario

22 Octubre 2024