Cotech DJC-119C-SCZ20-180 Manual de Usario

Cotech maquina de atornillar DJC-119C-SCZ20-180

Lee a continuación 📖 el manual en español para Cotech DJC-119C-SCZ20-180 (32 páginas) en la categoría maquina de atornillar. Esta guía fue útil para 2 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios

Descargar PDF
Página 1/32
Important!
Read the entire instruction manual carefully
and make sure that you fully understand
it before you use the equipment. Keep the
manual for future reference.
Viktig information:
Läs hela bruksanvisningen noggrant och
försäkra dig om att du har förstått den
innan du använder utrustningen. Spara
bruksanvisningen för framtida bruk.
Viktig informasjon:
Les disse anvisningene nøye og forsikre deg om
at du forstår dem, før du tar produktet i bruk.
Ta vare på anvisningene for seinere bruk.
Tärkeää tietoa:
Lue nämä ohjeet huolellisesti ja varmista
että olet ymmärtänyt ne, ennen kuin alat
käyttää laitetta. Säilytä ohjeet myöhempää
tarvetta varten.
ENGLISHSVENSKANORSKSUOMI
Borrmaskin
Boremaskin
Finska
Art.no Model
18-3188 DJC-119C-SCZ20-180-UK
40-7975 DJC-119C-SCZ20-180
Hammer
Drill/Driver
Ver. 201110
Original instructions
Bruksanvisning i original
Original bruksanvisning
Alkuperäinen käyttöohje
3
ENGLISH
18 V Li-Ion Drill/Driver
Art.no 18-3188 Model DJC-119C-SCZ20-180-UK
40-7975 DJC-119C-SCZ20-180
Please read the entire instruction manual before use and save it for future reference.
We reserve the right for any errors in text or images and for making any necessary
technical changes to this document. If you should have any questions concerning
technical problems please contact our Customer Services.
Safety
General safety instructions for cordless power tools
Warning! Read all the instructions. Failure to adhere to the following instructions
may lead to electric shocks, fires and/or serious injury. The term “power tools” in the
warning text below refers to your handheld mains operated or battery operated tool.
SAVE THESE INSTRUCTIONS.
1) The work area
a. Keep the work area clean and well illuminated. Cluttered and poorly lit areas
invite accidents.
b. Do not use power tools in explosive environments, e.g. near flammable liquids,
gases or dust. Power tools generate sparks that can easily ignite dust or fumes.
c. Keep children and other bystanders away from the area where you are using the
power tool. Distractions can cause you to lose your concentration and control.
2) Electrical safety
a. The power tool’s plug must fit correctly into the wall socket. Never modify the
plug in any way. Never use an adaptor together with earthed power tools.
Unmodified plugs and suitable wall sockets decrease the risk of electric shock.
b. Avoid physical contact with earthed objects, such as pipes, radiators, ovens or
refrigerators. There is an increased risk of receiving an electrical shock if your
body is earthed.
c. Do not expose the power tool to rain or other wet conditions. If water gets inside
a power tool it increases the risk of electric shock.
d. Do not abuse the lead. Never use the lead to carry the tool or pull the plug from
the wall socket. Keep the lead away from heat, oil, sharp edges and movable
parts. Damaged or tangled leads increase the risk of electric shock.
e. When using power tools outdoors, use an extension lead that is suitable for this
purpose. Use of an extension lead designed for outdoor use decreases the risk
for electric shock.
f. If for some reason you must use a power tool in a wet environment, always
connect it to the mains via an earth-fault circuit breaker such as an RCD (residual
current device). Using an RCD significantly reduces the chances of you receiving
an electric shock.

Especificaciones del producto

Marca: Cotech
Categoría: maquina de atornillar
Modelo: DJC-119C-SCZ20-180

¿Necesitas ayuda?

Si necesitas ayuda con Cotech DJC-119C-SCZ20-180 haz una pregunta a continuación y otros usuarios te responderán


maquina de atornillar Cotech Manuales

Cotech

Cotech DJC-119C-SCZ20-180 Manual de Usario

18 Agosto 2024
Cotech

Cotech HL-DT108-37 Manual de Usario

10 Agosto 2024

maquina de atornillar Manuales

Últimos maquina de atornillar Manuales

Bosch

Bosch GSB 12-2 Professional Manual de Usario

24 Octubre 2024
MSW

MSW -ACW700 Manual de Usario

20 Octubre 2024
Einhell

Einhell CC-IW 450 Manual de Usario

17 Octubre 2024
Metabo

Metabo SSW 650 Manual de Usario

17 Octubre 2024
Metabo

Metabo SSW 18 LT Manual de Usario

15 Octubre 2024
Makita

Makita DHP448 Manual de Usario

12 Octubre 2024
Black And Decker

Black And Decker HP9012 Manual de Usario

10 Octubre 2024
Milwaukee

Milwaukee 2769-20 Manual de Usario

7 Octubre 2024
Bosch

Bosch GSB 18V-65 Professional Manual de Usario

5 Octubre 2024
DeWalt

DeWalt DW132 Manual de Usario

5 Octubre 2024