Cramer A82TXE Manual de Usario

Cramer No categorizado A82TXE

Lee a continuación 📖 el manual en español para Cramer A82TXE (92 páginas) en la categoría No categorizado. Esta guía fue útil para 3 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios

Descargar PDF

Página 1/92

cramer.eu

2903186 (Edger)

EN | DE | ES | IT | FR | PT | NL | RU| FI | SV | NO| DA| PL | CS | SK | SL| HR|

EL | AR| TR | LT | LV | ET |

cramer.eu

Product Overview

Your machine has been engineered and manufactured to high standard

for dependability, ease of operation, and operator safety. When properly

cared for, it will give you years of trouble-free performance.

Know your Edger

1. Rubber protector

2. Lower shaft

3. Depth adjustment knob

4. Edger wheel

5. Blade

6. Guard

Assembly

Unpacking

This product requires assembly.

•Carefully remove the product and any accessories from the box. Make sure

that all items listed in the packing list are included.

WARNING!

Do not use this product if any parts on the Packing List are

already assembled to your product when you unpack it.

Parts on this list are not assembled to the product by the

manufacturer and require customer installation. Use of a

product that may have been improperly assembled could

result in serious personal injury.

•Inspect the product carefully to make sure no breakage or damage

occurred during shipping.

•Do not discard the packing material until you have carefully inspected and

satisfactorily operated the product.

WARNING!

If any parts are damaged or missing, do not operate this

product until the parts are replaced. Use of this product with

damaged or missing parts could result in serious personal

injury.

WARNING!

Do not attempt to modify this product or create accessories

not recommended for use with this string trimmer. Any such

alteration or modi฀cation is misuse and could result in a

hazardous condition leading to possible serious personal

injury.

2cramer.eu

WARNING!

To prevent accidental starting that could cause serious

personal injury,always remove the battery pack from the

product when assembling parts.

Adjusting depth of cut (see ) Figure 2

WARNING!

Avoid contact with the blade. Failure to avoid contact can

result in serious personal injury.

1 Remove the battery pack.

2 Loosen the depth adjustment knob to increase or decrease the depth.

3 Adjust the depth so that the blade barely touches the ground when the

machine is held in a normal operating posture.

4 Tighten the depth adjustment knob.

5 Standing in a normal working position, check the depth of cut again and

correct if necessary.

Replacing the blade (see ) Figure 3

NOTE: If the blade worn out, replace it with a new one (not provided) produced

by Greenworks.

1 Remove the battery pack.

2 Insert a metal rod (1) through the positioning hole to x the blade.

3 Remove the screw (2) clockwise with the wrench provided.

4 Remove the washer (3).

5 Remove the old blade and replace it with a new one.

6 Place the washer (3) on the blade.

7 Place the screw on the washer and tighten it unclockwise with the wrench

provided.

Installing the attachments to the split shaft coupling (see

Figure 4)

1 Remove the rubber protector.

2 Loosen the knob on the coupler.

3 Push in the release button located on the lower shaft. Align the release

button with the positioning hole and slide the two shafts together. Rotate

the lower shaft until the button locks into the positioning hole.

4 Tighten the knob securely.

NOTE: If the button does not release completely in the positioning hole, the

shafts are not locked into place. Slightly rotate from side to side until the button is

locked into place.

Operation

WARNING!

Do not allow familiarity with products to make you careless.

Remember that a careless fraction of a second is suf฀cient to

in฀ict serious injury.

WARNING!

Always wear eye protection. Failure to do so could result in

objects being thrown into your eyes resulting in possible serious

injury.

Especificaciones del producto

Marca:	Cramer
Categoría:	No categorizado
Modelo:	A82TXE
Amable:	AV-zender & ontvanger
Actual:	0.83 A
Tipo de conector USB:	Mini-USB B
Tecnología de conectividad:	Bedraad
Resolución Máxima:	4096 x 2160 Pixels
Sistema de audio:	Multikanaal
Número de conexiones USB:	1
Certificación:	CE, FCC, cULus, CCC, RCM
HDCP:	Ja
Entrada remota (IR):	2
Certificados de sostenibilidad:	RoHS
Profundidad del color:	12 Bit
Temperatura de almacenamiento:	-20 - 60 °C
Canales de salida de audio:	7.1 kanalen
Certificado HDBaseT:	Ja
Salida remota (IR):	2
Entrada HDMI:	1
Puertos de salida RJ-45:	1
Banda-ancha:	18 Gbit/s
Número de salidas HDMI:	1
Configuración del receptor (B x D x H):	109 x 127 x 26 mm
Puertos de entrada RJ-45:	1
Tensión de funcionamiento:	48 V
Puerto HDBaseT:	Ja
Rango-maximo:	70 m
voltaje-de-entrada-de-CA:	100 - 240 V
Frecuencia-de-entrada-de-CA:	50 - 60 Hz
Consumo de energía (típico):	13 W
Temperatura de funcionamiento (TT):	0 - 50 °C
Humedad relativa de funcionamiento (VV):	20 - 90 procent
Control-de-electrónica-de-consumo-(CEC):	Ja
Peso del receptor:	392 g
Dimensiones del transmisor (AnxPrxAl):	109 x 127 x 26 mm
Peso del transmisor:	390 g
Tipos de cables compatibles:	Cat5e, Cat6, Cat6a, Cat7