Creality3D CR-10S Pro V2 Manual de Usario
Creality3D
Impresora 3D
CR-10S Pro V2
Lee a continuación 📖 el manual en español para Creality3D CR-10S Pro V2 (16 páginas) en la categoría Impresora 3D. Esta guía fue útil para 3 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios
Página 1/16
CR-10S Pro Printer
Guide Boo
◆This guide book is for standard CR-10S Pro.
◆Please plug the power cord into a three-hole power jack.
◆Detailed instructions for use are available on the TF card.
.1.0
To be the Chief Evangelist
To make Top-quality 3D
Contents
1. Introduction....................................1
2. General List.....................................2
3. Device Installation..........................3
4. Cable Connection............................4
5. Screen Information.........................5
6. Loading Filament............................6
7. Bed Leveling......................................7
8. Software Installation........................9
9. For the First Printing........................10
10. Circuit Wiring...................................11
11. After-Sales Services..........................12
Preface
Dear consumers,
Thank you for choosing our products. For the best experience, please read the instructions before operating the Printer.
Our 3D team will always be ready to give you the best service. Please contact us via the phone number or e-mail address
provided at the end when you encounter any problem with the Printer.
For a better experience in using our product, you may learn how to use the Printer in the following ways:
1. View the accompanied instructions and videos on the TF card.
2. Visit our official website at You will find relevant software/hardware information, contact details and www.creality3d.cn
operation and maintenance instructions on the website.
Notes
1. Do not use the printer any way other than described herein in order to avoid personal injury or property
damage.
2. Do not place the printer near any heat source or flammable or explosive objects. We suggest placing it in a
well-ventilated, low-dust environment.
3. Do not expose the printer to violent vibration or any unstable environment, as this may cause poor print
quality.
4. Before using experimental or exotic filaments, we suggest using standard filaments such as ABS or PLA to
calibrate and test the machine.
5. Do not use any other power cable except the one supplied. Always use a grounded three-prong power
outlet.
6. Do not touch the nozzle or printing surface during operation as they may be hot. Keep hands away from
machine while in use to avoid burns or personal injury.
7. Do not wear gloves or loose clothing when operating the printer. Such cloths may become tangled in the
printers moving parts leading to burns, possible bodily injury, or printer damage.
8. When cleaning debris from the printer hotend, always use the provided tools. Do not touch the nozzle
directly when heated. This can cause personal injury.
9. Clean the printer frequently. Always turn the power off when cleaning, and wipe with a dry cloth to remove
dust, adhered printing plastics or any other material off the frame, guide rails, or wheels . Use glass cleaner
or isopropyl alcohol to clean the print surface before every print for consistent results.
10. Children under 10 years of age should not use the printer without supervision.
Especificaciones del producto
| Marca: | Creality3D |
| Categoría: | Impresora 3D |
| Modelo: | CR-10S Pro V2 |
¿Necesitas ayuda?
Si necesitas ayuda con Creality3D CR-10S Pro V2 haz una pregunta a continuación y otros usuarios te responderán
Impresora 3D Creality3D Manuales
28 Agosto 2024
26 Agosto 2024
Impresora 3D Manuales
- Impresora 3D Anker
- Impresora 3D Renkforce
- Impresora 3D Kodak
- Impresora 3D Exibel
- Impresora 3D BQ
- Impresora 3D Monoprice
- Impresora 3D Flashforge
- Impresora 3D XYZprinting
- Impresora 3D MakerBot
- Impresora 3D Leap Frog
- Impresora 3D Snapmaker
- Impresora 3D Anycubic
- Impresora 3D German RepRap
- Impresora 3D Wanhao
- Impresora 3D Artillery
- Impresora 3D GooVer
- Impresora 3D Easy Threed
- Impresora 3D Zortrax
- Impresora 3D LulzBot
- Impresora 3D SINDOH
- Impresora 3D PP3DP
- Impresora 3D Wasp
- Impresora 3D 3D Systems
- Impresora 3D Creality
- Impresora 3D Raise3D
- Impresora 3D Craftbot
Últimos Impresora 3D Manuales
27 Septiembre 2024
17 Septiembre 2024
17 Septiembre 2024
16 Septiembre 2024
16 Septiembre 2024
16 Septiembre 2024
14 Septiembre 2024
14 Septiembre 2024
14 Septiembre 2024
14 Septiembre 2024