Crest Audio Versarray PRO 215 Manual de Usario

Crest Audio Vocero Versarray PRO 215

Lee a continuación 📖 el manual en español para Crest Audio Versarray PRO 215 (64 páginas) en la categoría Vocero. Esta guía fue útil para 2 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios

Descargar PDF

Página 1/64

Versarray™ Pro 215

Powered Enclosure

Product Specifications

e Crest Audio® Versarray™ Pro 215 Sub Powered Subwoofer speaker system consists of a pair of Peavey® 15” Low Rider® woofers combined with a super-

solid cabinet with a simple, quick, yet exible rigging system. Designed to provide modular coverage of small to medium venues, and intended for use with

the companion Crest Audio® Versarray™ Pro 112 models, the Versarray™ Pro 215 Sub oers excellent versatility with a very high performance capability. e

subwoofer system consists of the following woofer components: a pair of Peavey® 15” Low Rider® series woofers with a very long throw 4” voice coil structure.

Capable of over 800W of continuous power handling (AES Std 2-1984) each, these woofers can project a lot of low frequency energy.

e Versarray™ Pro 215 Sub incorporates Peavey’s UniVent™ air pumping venting technology. e UniVent™ venting system literally pumps air through the

enclosure, exchanging the stale hot air inside the cabinet for the cooler outside air. is helps keep the woofer operating temperatures from getting so high, and

increases reliability and reduces power compression under heavy continuous drive conditions. e air pumping action is achieved without excessive turbulence

or any signicant net asymmetry of total vent air ow.

Power for both woofers is supplied by some very ecient power amplier systems, controlled by a sophisticated and rened DSP operations system with Dante

connection capability. Total system power is 3000W total peak power, with 1500W total sine wave power for the woofers. is sheer power is controlled pre-

cisely and processed by a high performance DSP system, which provides all the crossover and EQ functions, as well as providing all limiting, compression and

driver protection duties with unfailing attention to every detail of the music.

e adjustable rigging system provides for hanging multiple Crest Audio® Versarray™ Pro 112 cabinets below a single Sub, or multiple Subs. Quick-lock pins

are supplied with the rigging hardware to couple the Versarray™ Pro 215 Subs together, and to the rigging Halo and Frames. e exibility of the Versarray™

FlyQWIK™ system allows the use of anywhere from 1 to 7 Versarray™ Pro 215 Subs in conjunction with an appropriate number of Versarray™ Pro 112 cabinets.

An optional special Sub Support Frame rigging adaptor mounts to the Versarray™ Pro 215 Sub, and allows Versarray™ Pro 112’s to be own below the Sub, with

the Sub being own from a Crest Audio® Versarray™ Halo. See Crest Audio® Model Versarray™ Mk3 Halo Spec Sheet for details of the allowable mix of Versar-

ray™ Subs to 2-ways.

Features

•Dual Woofer Subwoofer SR System

• 3000 Total Peak watts of system power

• 15” Low Rider® 4” VC Peavey® Woofer

• Peavey’s UniVent™ air pumping venting technology

• Power amp is fan cooled for maximum reliability

• Easy FlyQWIK™ hardware rigging system

• Full complement of DSP based limiting and compression to protect the drivers from overdrive conditions

• Inputs are analog XLR in and/or Dante Ethernet audio network in.

• Analog Output ru connector is a male XLR

• 18 mm 13 ply Baltic Birch enclosure

• Hammerhead™ polyurea black nish and black powder-coated cloth lined grilles

• PowerCON® TRUE1 TOP Input and ru AC power connections

• Comes with PowerCON® AC cords, one AC outlet to Sub, and one jumper cord.

• Has rubber feet for oor use when not own

Frequency Response, 1 meter

on-axis, swept-sine in anechoic

Environment (-6 dB):

35 Hz – 125 Hz

Useable Low Frequency Limit

(-10 dB anechoic): 33 Hz

Power Amp Rating, Total Power

Output:

3,000 watts* total peak available

power

Sine wave Power: 1,500 watts*

total

*Output duration is limiter

controlled

Sound Pressure Level, 1 Watt, 1

meter in anechoic environment:

101 dB SPL (Both

speakers driven with 1 watt)

Maximum Sound Pressure Level

(1 meter):

Anechoic environment: 130 dB

SPL continuous

(flown)

133 dB SPL peak

One half space: 136 dB

SPL continuous

(on floor)

139 dB SPL peak

Transducer Complement:

Dual 15” Peavey® Low Rider® 4

ohm woofers, 4” voice coil

Box Tuning Frequency:

36 Hz

Electronic Crossover:

DSP based, Crossover Frequency:

125 Hz

Low Pass slope: 24 dB/octave

Infrasonic Filter Slope:

36 dB/octave, staggered poles

Transducer Impedance (Z):

Low Frequency Nominal (X2): 4

ohms each woofer

Signal Input Connections:

Analog XLR in and/or Dante

Ethernet audio network in.

Enclosure Materials & Finish:

18 mm 13 ply Baltic Birch

plywood finished in a tough

Hammerhead™ polyurea black

finish, with a perforated steel

grille finished in black powder

coat paint and a cloth liner inside.

Inner steel frame and backing

plates for rigging hardware.

Mounting provisions: Custom

array brackets and hardware, and

a custom array rigging system

are included with each cabinet.

10mm quick release pins are

included with each cabinet,

conveniently affixed using wire

rope lanyards.

Dimensions (H x W x D):

32.75 in. x 25.13 in. x 21.25 in.

832 mm x 638 mm x 540 mm

With Rigging hardware and Pins:

32.75 in. x 27.23 in. x 21.25 in.

832 mm x 692 mm x 540 mm

Net Weight: 161 Lbs. (73.2 kg)

{includes all cabinet associated

rigging hardware for each cabinet,

including quick-loc pins, etc}

Companion Speaker Models (sold

separately):

Crest Audio® Versarray™ 112 Pro

Powered Line Array SR System

with dual ribbon tweeters, 2-way

Crest Audio® Versarray™ 218 Pro

Powered Sub with double 18”

LowRider® woofers subwoofer.

Additional Power Amp

Specifications

THD: Typically less than 0.1%

AC Power Input: Universal

power supply 120–240 VAC, 50

to 60 Hz

DSP Section Specifications:

Sampling frequency: 48 kHz

Bit Depth: 24 bits for ADC/DAC

Latency: 3.5 ms typical

Architectural and Engineering

Specifications

The loudspeaker system shall

have an operating bandwidth of

35 Hz to 125 Hz, measured on

axis at 1 meter in a half-space

environment, with +3/- 6 dB

tolerance. The maximum peak

output level shall be 139 dB when

measured at a distance of one

meter with full system output.

The woofers loaded into the

cabinet shall be two Peavey® Low

Rider® 18” 4 ohm woofers, rated

at 800W continuous power per

AES Std. 1984-2. The enclosure

vents shall incorporate the

Univent™ air pumping system to

aid cool air circulation through

the cabinet.

The powered speaker amplifiers

shall have a total power output

of 1500 watts sine wave, and the

power amp shall be fan cooled.

Signal input shall be provided

via XLR analog and Dante

Ethernet connections. DSP signal

processing shall be incorporated

to provide the crossover,

protective filtering and EQ for

the system, as well as limiting

and compression to minimize

overdrive distortion.

The cabinet shall incorporate

rigging hardware to interface

with the Crest Audio® Versarray™

FlyQWIK™ rigging system, and

the 10 mm locking quick release

pins required to interface to the

FlyQWIK™ hardware shall be

included with the cabinet.

The outside dimensions shall be

32.75 inches high by 25.13 inches

wide by 21.25 inches deep. The

weight shall be 161 pounds. The

loudspeaker system shall be a

Crest Audio® model Versarray™

Pro 215 Sub.

SPECIFICATIONS Versarray

™

PRO 215

Frequency Response

Versarray™ Pro 215 Subs Dimensions

Especificaciones del producto

Marca:	Crest Audio
Categoría:	Vocero
Modelo:	Versarray PRO 215
Color del producto:	Zwart
Consumo-anual-de-energía:	12 kWu
Peso del embalaje:	1826.6 g
Ancho del embalaje:	315 mm
Empaquetadura en profundidad:	144 mm
Altura del embalaje:	243 mm
Clase de eficiencia energética (antigua):	A
Ajustable en altura:	Nee
Diagonal de la pantalla:	10.1 "
Resolución:	1280 x 800 Pixels
Pantalla táctil:	Ja
Relación de aspecto original:	16:10
Ángulo de visión, horizontal:	170 °
Ángulo de visión, vertical:	170 °
Cables suministrados:	AC, HDMI, USB
Forma de pantalla:	Flat
Relación de contraste típica:	800:1
Rango de frecuencia horizontal:	31.5 - 80 kHz
Puerto(s) VGA (D-Sub):	1
Número de puertos HDMI:	1
Puerto DVI:	Nee
Altavoces incorporados:	Ja
Energía promedio:	4 W
Consumo de energía (en espera):	1.26 W
Número de hablantes:	2
Certificación:	Canada cUL, IC\nEurope CE\nJapan VCCI\nUnited States UL, FCC\nChina CCC\nKorea, KCC, e-standby\nAustralia RCM\nMexico NOM\nTaiwan BSMI\nInternational CB\nRoHS, China RoHS, WEEE, REACH\nIndia BIS\nRussia EAC
Pantalla, número de colores.:	262000 kleuren
Consumo de energía (cuando está apagado):	0.2 W
Velocidad máxima de actualización:	60 Hz
Conexión para adaptador de red:	Ja
tipo HD:	HD
Entradas de audio:	Ja
hdmi:	Ja
Tecnología de visualización:	LCD
Tiempo de respuesta:	29 ms
Resoluciones de gráficos compatibles:	640 x 480 (VGA), 800 x 600 (SVGA), 1024 x 768 (XGA), 1280 x 800 (WXGA), 1920 x 1080 (HD 1080), 1920 x 1200 (WUXGA)
Montaje VESA:	Ja
Interfaz de montaje en panel:	75 x 75 mm
Certificados de sostenibilidad:	RoHS
Brillo (típico):	350 cd/m²
Cámara integrada:	Nee
Profundidad (sin base):	28.45 mm
Altura (sin base):	165.31 mm
Ancho (sin base):	250.42 mm
Peso (sin base):	884.2 g
Visualización en pantalla (OSD) -talen:	CHI (SIMPL), CHI (TR), DEU, ENG, ESP, FRE, ITA, JPN
AMD FreeSync:	Nee
NVIDIA G-SYNC:	Nee
Visualización en pantalla (OSD):	Ja
Número de idiomas de visualización en pantalla:	8
Tipo de retroiluminación:	LED
Temperatura de almacenamiento:	-20 - 60 °C
Tipo de panel:	TFT
Humedad de almacenamiento:	10 - 95 procent
Tamaño de imagen (horizontal):	216.96 mm
Tamaño de imagen (vertical):	135.6 mm
Número de puertos descendentes USB Type-C:	1
Consumo de energía (típico):	7.43 W
Temperatura de funcionamiento (TT):	0 - 40 °C
Humedad relativa de funcionamiento (VV):	20 - 80 procent
Escala de eficiencia energética:	A+++ tot D
Código del Sistema Armonizado (SA):	85285210